Instrukcja obsługi Rule Standard Bilge Pump

Rule Przepych Standard Bilge Pump

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rule Standard Bilge Pump (47 stron) w kategorii Przepych. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/47
Standard Bilge Pump
INSTRUCTION MANUAL
FR
DE
IT
NL
SE
ES
Manuel d’utilisation pour pompe de cale standard
Bedienungsanleitung für die Standard-Bilgenpumpe
Manuale delle istruzioni per la pompa di sentina
standard
Manual de instrucciones de la bomba de achique
estándar
Användarhandbok för standard länspump
Handleiding voor standaard lenspomp
Purpose of this manual
The purpose of this manual is to provide necessary information for product installation, operation
and maintenance.
CAUTION: Read this manual carefully before installing, using or servicing this
product. Failure to follow the instructions within this manual could result in explosion,
property damage, severe personal injury and/or death.
DANGER: Failure to follow this instruction manual may lead to signicant property
damage or may result in serious injury or death.
About safety messages
It is extremely important that you read, understand and follow the safety messages and regulations
carefully before handling the product. They are published to help prevent these hazards:
WARNING:
• The operator must be aware of safety precautions to prevent physical injury.
• Operating, installing or maintaining the unit in any way that is not covered
in this manual could cause death, serious personal injury or damage to the
equipment. This includes any modication to the equipment or use of parts
not provided by Xylem. If there is a question regarding the intended use of
equipment, please contact Xylem representative before proceeding.
• Do not change the service application without the approval of a authorized
Xylem representative.
• Personal accidents and health problems
• Damage to the product
• Product malfunction
NOTICE: Save this manual for future reference, and keep it readily available at the
location of the unit.
Safety
Safety terminology and symbols
Hazard Level:
DANGER
WARNING
CAUTION
NOTICE
Indication:
A hazardous situation which, if not avoided, will result in death or serious injury.
A hazardous situation which, if not avoided, could result in death or serious injury.
A hazardous situation which, if not avoided, could result in minor or moderate injury.
A potential situation which, if not avoided, could result in undesirable conditions.
A practice not related to personal injury.
2
ELECTRICAL HAZARD:
Hazard categories can either fall under hazard levels or let specic symbols replace the ordinary
hazard levels symbols. Electrical hazards are indicated by the following specic symbols:
These are examples of other categories that can occur. They fall under the ordinary hazard
levels and may use complementing symbols:
Hazard categories
• Crush hazard
• Cutting hazard
• Arc ash hazard
General safety rules
These are safety rules apply:
• Always keep work area clean
• Pay attention to the risks presented by gas and vapors in the work area.
• Avoid all electrical dangers. Pay attention to the risks of electric shock or arc ash hazards
• Always bear in mind the risk of drowning, electrical accidents and burn injuries
User safety
Safety equipment
Use safety equipment according to the company regulations. Use this safety equipment within the work area:
Electrical connections
Electrical connections must be made by certied electricians in compliance with all
international, national, state and local regulations. For more information about requirements,
see sections dealing specically with electrical connections.
• Hard hat
• Safety goggles, preferably with side shields
• Protective shoes
• Protective gloves
• Gas mask
• Hearing protection
• First-aid kit
• Safety devices
NOTICE: Never operate a unit unless safety devices are installed.
Precautions before work
Observe these safety precautions before you work with the product or are in connection with the product:
• Provide a suitable barrier around the work area, for example, a guard rail
• Make sure that all safety guards are in place and secure
• Make sure that you have a clear path of retreat
• Make sure that the product cannot roll or fall over and injure people or damage property
3

Specyfikacje produktu

Marka: Rule
Kategoria: Przepych
Model: Standard Bilge Pump

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rule Standard Bilge Pump, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Przepych Rule

Rule

Rule Standard Bilge Pump Instrukcja

12 Września 2024

Instrukcje Przepych

Najnowsze instrukcje dla Przepych

Gardena

Gardena RWT Pump 2000/2 Li-18 Instrukcja

15 Października 2024
Ozito

Ozito PTP-012A Instrukcja

15 Października 2024
MSW

MSW -AN-100 Instrukcja

15 Października 2024
MSW

MSW -MN34 Instrukcja

15 Października 2024
MSW

MSW -MN34M Instrukcja

15 Października 2024
MSW

MSW -AOP40S Instrukcja

15 Października 2024
Nefit

Nefit VentiLine Instrukcja

12 Października 2024
Liberty Pumps

Liberty Pumps 250 Instrukcja

9 Października 2024
Liberty Pumps

Liberty Pumps 457 Instrukcja

9 Października 2024
Liberty Pumps

Liberty Pumps 230 Instrukcja

9 Października 2024