Instrukcja obsługi Royal Sovereign RDL-210Qi


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Royal Sovereign RDL-210Qi (2 stron) w kategorii Lampa. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
LED Desk Lamp
RDL-210Qi
Product Overview
1. Ensure the LED Desk Lamp is unplugged
2. Use a damp cloth to clean the unit.
3. Do not immerse the unit in water.
4. Do not use detergent or abrasives for cleaning.
Specifications
How to Set Up Warranty
Royal Sovereign warrants this product to be free from defects in material
and workmanship. Our obligation under this warranty is limited to the
repair or replacement, free of charge, when delivered to an authorized
Royal Sovereign service center, of any defe part(s) thereof, other than ctive
parts damaged in transit.
This warranty is in effect to the original purchaser, for a period of one year
from the date of purchase and is not transferable.
This warranty shall apply only if the product is used in accordance with
the factory provide instructions which accompany it.d
Exclusions
This warranty excludes and does not cover defects, malfunctions or
failures of this product, caused by repairs by unauthorized persons or
service centers, mishandling, improper installation, modification or
unreasonable use including incorrect voltage, acts of God, or failure to
provide reasonable and necessary maintenance. This warranty is in lieu of
any and all expressed warranties. In no event shall Royal Sovereign be
liable for consequential or incidental damages. This limitation would not
apply if you live in a location that does not permit the xclusion of e
limitation of incidental or consequential damages.
ROYAL SOVEREIGN INTERNATIONAL, INC.
2 Volvo Dr., Rockleigh, NJ 07647 USA
TEL: +1) 800-397-1025
Email: info@royalsovereign.com
Because our products are subject to continuous improvement, Royal
Sovereign reserves the right to modify product design and specification
without notice and without incurring any obligation E&OE.
Operation
1. Place the LED Desk lamp at the desired location on a desk or table.
2. Place the power adapter plug into the power adapter input.
3. Connect the supplied power adapter into electrical outlet.
4. Turn ON/OFF the desk lamp
5. TemperatureUse the control buttons to adjust: Brightness Lightand
Read and Save These Instructions
Feature
Light Output
Input Power
Light Color/Temperature
Material
Qi Output
Light Modes
Adapter
Dimensions
Weight
RDL-210Qi
550 Lumens
10 Watts
3000K, 4 00K, 6 00K0 0
ABS
5V, 500mA - 1000mA
Warm, Bright, Daylight
100-240V AC 50/60 Hz
8.00 7 95 26 1” x .” x . 4
( mm)203 x 202 x 664
4.60 2 09 lbs. ( .kg)
This instruction sheet is not meant to cover all possible conditions and situations
that may occur. Caution and care must be d with any electrical product. use
Cleaning
Before cleaning:
1.Pull out the terminal from lamppost and insert it to the base. Insert
the lamppost to the base afterward.
Note: In case you need to take apart the lamp, remove the screw and pull
out the lamppost slightly and separate the terminal slowly.
2.Tighten the base and lamppost with
screw at the bottom side.
(Warm, Bright or Daylight),
6. Carefully adjust the tilt adjusting head to the desired position.
Qi Wireless Charging and USB Charging
This lamp allows you to wirelessly charge your mobile phone. This device only
charges Qi enabled devices. Please make sure your mobile device is Qi enabled prior
to charging. To charge, simply place your mobile device on the charging platform.
You may need to move the phone around on the baseto find the correct positioning.
If charging successfully, the indicator light will turn on. If cell phone case is too thick,
it may effect the charging result.
This desk lamp also has a USB charging port. If you mobile device is not Qi enabled,
you can plug your USB cord into the port.
Metallic
Rotary Knob
Touch Control
Buttons
Press to turn on/off the lamp.
It remains the last brightness & CCT when
turn on the lamp again.
Rotating dimming mode
In any color temperature,
the foruser can rotate the knob stepless dimming.
Rotate the knob up for decreasing brightness, rotate it down for increasing
brightness. When brightness , means the is no longer changing that the
brightness in maximum or minimum state.is its
Three color temperature mode
The first you the time touch key,MODE the lamp will be in nature light and all
bright. Color temperature is 4000K( ±300K). Rotate the knob to adjust the
brightness.
The second time you touch key, the MODE the lamp will be in warm light and
all bright the. Color temperature is 3000K( 300K). Rotate the knob to adjust±
brightness.
all bright. Color temperature is 6000K( 300K). ±
Rotate the knob to stepless adjust brightness.
Safety Warning
To reduce the risk of fire, electric shock or injury
1. Unplug the adapter if not in use fora long period of time.
2 . Do not place your hands on theLED light, as this will become hot when in use.
3. Do not usewith an extension cord .
4. Do not try to alter the plug.
5. Please use only indoors.
6. Do not look directly at the LED light to avoid damage to eyes.
7. Do not cover the product with a cloth, paper, or easily flammable material.
8. Place on a stable surface.
9. If light is off or flickering, please check if adapter and DC connection socket is
secure. If they are and problem continues, please contact Royal Sovereign.
The third you the the lamp will be in cool light and all time touch key, MODE
bright 6 the. Color temperature is 000K( 300K). Rotate the knob to adjust±
brightness.


Specyfikacje produktu

Marka: Royal Sovereign
Kategoria: Lampa
Model: RDL-210Qi

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Royal Sovereign RDL-210Qi, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Lampa Royal Sovereign

Instrukcje Lampa

Najnowsze instrukcje dla Lampa