Instrukcja obsługi Rotel RSX-1058

Rotel odbiornik RSX-1058

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rotel RSX-1058 (91 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/91

Owner’s manual

Manuel d’utilisation

RSX-1058

Surround Sound Receiver

Ampli-tuner Surround



          

 



  

    

     



 











 



RSX-1058 Surround Sound Receiver

> 10 cm

> 4 in

> 10 cm

> 4 in

> 10 cm

> 4 in

> 10 cm > 4 in

Rotel products are designed to comply with international directives on the

Restriction of Hazardous Substances (RoHS) in electrical and electronic

equipment and the disposal of Waste Electrical and Electronic Equipment

(WEEE). The crossed wheelie bin symbol indicates compliance and that

the products must be appropriately recycled or processed in accordance

with these directives.

This symbol means that this unit is double insulated. An earth or ground

connection is not required.



          

   

  



     



 







 

 

 



English

Notice

The

COMPUTER I/O connection

should be handled by authorized persons only.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.(TV, radio, etc.)

• Increase the separation between the equipment and receiver

• Connect the equipment to an outlet on circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for additional help.

Caution

This device complies with part 15 of the FCC Rules operation is subject to the following to condi-

tions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE TO CATV SYSTEM INSTALLER: Call the CATV system or antenna

installer’s attention to Article 820-40 of the NEC. This provides guidelines for proper grounding

and, in particular, speciﬁes that the cable ground shall be connected to the grounding system of

the building, as close to the point of cable entry as practical. See installation diagram.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-

sonable protection against interference in a residential installation. This equipment generates

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause interference to radio or TV communications. There is no guarantee that

interference will not occur in a particular installation. If this equipment does cause interference

to radio or television reception, which can be determined by turning the equipment off and on,

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the unit and the television tuner.

• Connect the unit to an AC power outlet on a different electrical circuit.

• Consult your authorized Rotel retailer for assistance.

Important Safety Instructions

WARNING: There are no user serviceable parts inside. Refer all servicing to qualiﬁed

service personnel.

WARNING: To reduce the risk of ﬁre or electric shock, do not expose the unit to mois-

ture or water. Do not expose the unit to dripping or splashing. Do not place objects ﬁlled with

liquids, such as vases, on the unit. Do not allow foreign objects to get into the enclosure. If the

unit is exposed to moisture, or a foreign object gets into the enclosure, immediately discon-

nect the power cord from the wall. Take the unit to a qualiﬁed service person for inspection

and necessary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself. Fol-

low all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

Do not use this unit near water.

You must allow a minimum 10 cm or 4 inches of unobstructed clearance around

the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the ven-

tilation openings. If the unit is placed in a bookcase or cabinet, there must be ventilation of the

cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any other appliance that

produces heat.

The unit must be connected to a power supply only of the type and voltage speciﬁed on the rear

panel. (USA: 120 V/60Hz, EC: 230V/50Hz)

Connect the component to the power outlet only with the supplied power supply cable or an

exact equivalent. Do not modify the supplied cable. A polarized plug has two blades, with one

wider than the other. A grounding plug has two blades plus a third grounding prong. These are

provided for your safety. Do not defeat grounding and/or polarization safety provisions. If the

supplied plug does not ﬁt your outlet, please consult an electrician for replacement of the ob-

solete outlet. Do not use extension cords.

The main plug of the power cordset is a disconnect device of the apparatus. In order to com-

pletely disconnect the apparatus from the supply mains, the main plug of the power cordset

should be unplugged from the mains (AC) outlet. The stand-by LED indicator will not be lit up

to show the power cord is unplugged.

Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or dam-

aged in any way. Pay particular attention to the power cord at the plug and where the cord

exits the back of the unit.

The power cord should be unplugged from the wall outlet during a lightning storm or if the unit

is to be left unused for a long period of time.

Use only accessories speciﬁed by the manufacturer.

Use only with a cart, stand, rack, bracket or shelf system recommended by Rotel. Use caution

when moving the unit in a stand or rack to avoid injury from a tip-over.

Use Class 2 wiring for speaker connections to ensure proper installation and minimize the risk

of electrical shock.

Immediately stop using the component and have it inspected and/or serviced by a qualiﬁed

service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

WARNING: The master power switch is located on the rear panel. The unit must be lo-

cated in the open area allowing unobstructed access to the main power switch.

Specyfikacje produktu

Marka:	Rotel
Kategoria:	odbiornik
Model:	RSX-1058

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rotel RSX-1058, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje odbiornik Rotel

Rotel A8 Instrukcja

9 Października 2024

Rotel A11MKII Instrukcja

24 Września 2024

Rotel A10MKII Instrukcja

24 Września 2024

Rotel RA11 Instrukcja

6 Września 2024

Rotel RSX-972 Instrukcja

1 Września 2024

Rotel RKB-650 Instrukcja

1 Września 2024

Rotel RB-1590 Instrukcja

29 Sierpnia 2024

Rotel A11 Instrukcja

21 Sierpnia 2024

Rotel RSX-965 Instrukcja

20 Sierpnia 2024

Rotel RC-1590MKII Instrukcja

24 Lipca 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

ETON MA 1 Instrukcja

19 Marca 2025

Elipson P1 Instrukcja

14 Marca 2025

Elipson Stream S300 Xi Instrukcja

14 Marca 2025

Elipson WIIM Mini Instrukcja

14 Marca 2025

KanexPro SP-1X16SL18G Instrukcja

13 Marca 2025

Marshall Electronics VDA-108-3GS Instrukcja

13 Marca 2025

Rega Brio MK7 Instrukcja

12 Marca 2025

Rexing RoadMate CPStream Instrukcja

12 Marca 2025

Mtx Audio Thunder TH2500.1 Instrukcja

11 Marca 2025

Mtx Audio Thunder TH1500.1 Instrukcja

11 Marca 2025