Instrukcja obsługi Rotel RB-1590

Rotel Receiver RB-1590

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rotel RB-1590 (50 stron) w kategorii Receiver. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/50
Owner’s Manual
Manuel de l’utilisateur
Bedienungsanleitung
Manual de Instrucciones
Gebruikershandleiding
Manuale di istruzioni
Instruktionsbok
Инструкция пользователя
RB-1590
Stereo Power Amplier
Amplicateur de puissance Stéréo
Stereo-Endstufe
Etapa de Potencia Estereofónica
Stereo vermogensversterker
Amplicatore nale stereo
Stereoslutsteg
Стерео усилитель мощности
2RB-1590 Stereo Power Amplier
WARNING: There are no user serviceable parts inside. Refer all
servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose
the unit to moisture or water. Do not expose the unit to dripping or
splashing. Do not place objects filled with liquids, such as vases, on
the unit. Do not allow foreign objects to get into the enclosure. If the
unit is exposed to moisture, or a foreign object gets into the enclosure,
immediately disconnect the power cord from the wall. Take the unit
to a qualified service person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component.
Keep this manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and
on the product itself. Follow all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner.
Do not use this unit near water.
You must allow a minimum 10 cm or 4 inches of unobstructed
clearance around the unit.
Do not place the unit on a bed, sofa, rug, or similar surface that could
block the ventilation openings. If the unit is placed in a bookcase or
cabinet, there must be ventilation of the cabinet to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or
any other appliance that produces heat.
Rotel products are designed to comply with
international directives on the Restriction of Hazardous
Substances (RoHS) in electrical and electronic
equipment and the disposal of Waste Electrical and
Electronic Equipment (WEEE). The crossed wheelie bin
symbol indicates compliance and that the products
must be appropriately recycled or processed in
accordance with these directives.
Important Safety Instructions
WARNING: The rear panel power cord connector is the mains power
disconnect device. The device must be located in an open area that
allows access to the cord connector.
The unit must be connected to a power supply only of the type
and voltage specified on the rear panel. (USA: 120V/60Hz,
EC: 230V/50Hz)
Connect the component to the power outlet only with the supplied
power supply cable or an exact equivalent. Do not modify the
supplied cable. A polarized plug has two blades, with one wider than
the other. A grounding plug has two blades plus a third grounding
prong. These are provided for your safety. Do not defeat grounding
and/or polarization safety provisions. If the supplied plug does not
fit your outlet, please consult an electrician for replacement of the
obsolete outlet. Do not use extension cords.
The main plug of the power cordset is a disconnect device of the
apparatus. In order to completely disconnect the apparatus from
the supply mains, the main plug of the power cordset should be
unplugged from the mains (AC) outlet. The power LED indicator will
not be lit up to show the power cord is unplugged. The disconnect
device shall remain readily operable.
Do not route the power cord where it will be crushed, pinched, bent,
exposed to heat, or damaged in any way. Pay particular attention to the
power cord at the plug and where the cord exits the back of the unit.
The power cord should be unplugged from the wall outlet during a
lightning storm or if the unit is to be left unused for a long period of time.
This apparatus shall be connected to a main socket outlet with a
protective earth connection.
Use only accessories specified by the manufacturer.
Use only with a cart, stand, rack, bracket or shelf
system recommended by Rotel. Use caution when
moving the unit in a stand or rack to avoid injury
from a tip-over.
Use Class 2 wiring for speaker connections to ensure proper insulation
and minimize the risk of electric shock.
Immediately stop using the component and have it inspected and/
or serviced by a qualified service agency if:
The power supply cord or plug has been damaged.
Objects have fallen or liquid has been spilled into the unit.
The unit has been exposed to rain.
The unit shows signs of improper operation.
The unit has been dropped or damaged in any way.
Pin Assignments
Balanced Audio (3 pole XLR):
Pin 1: Ground / Screen
Pin 2: In phase / +ve / Hot
Pin 3: Out of phase / -ve / Cold
3
English
Figure 1: Controls and Connections
Commandes et Branchements
Bedienelemente und Anschsse
Controles y Conexiones
Bedieningselementen en aansluitingen
Controlli e connessioni
Kontroller och anslutningar
Органы управления и разъемы
POWER AMPLIFIER
MODEL NO. : RB -1590
POWER CONSUMPT ION : 800W
BALANCED
UNB ALAN CED
12V T RI GGER
ON
OFF IN OUT
UNB ALAN CED UNB ALAN CED
RI LEGHT INP UT FT INPU T
BALANCED BALA NCED
RIG HT S PEAK ER FT SPEAKERLE
RP-553
SPEAKER IMPEDANCE
COMBINED LOAD
4 OHMS MINIMUM
PUSH PUSH
232 43
6575
1

Specyfikacje produktu

Marka: Rotel
Kategoria: Receiver
Model: RB-1590

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rotel RB-1590, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Receiver Rotel

Rotel

Rotel A8 Instrukcja

9 Października 2024
Rotel

Rotel RB-1590 Instrukcja

29 Sierpnia 2024

Instrukcje Receiver

Najnowsze instrukcje dla Receiver

Avantree

Avantree Audiplex Instrukcja

9 Października 2024
Avantree

Avantree Oasis Plus Instrukcja

9 Października 2024
Avantree

Avantree ProLink Instrukcja

9 Października 2024
Cayin

Cayin M-11LS Instrukcja

9 Października 2024
Cayin

Cayin M-845D Instrukcja

9 Października 2024
Axton

Axton A894DSP Instrukcja

9 Października 2024
Extron

Extron XTP R HWP 201 4K Instrukcja

9 Października 2024
Ecler

Ecler SAM612T Instrukcja

9 Października 2024
Wet Sounds

Wet Sounds HTM-6 Instrukcja

9 Października 2024
Wet Sounds

Wet Sounds HTM-8 Instrukcja

9 Października 2024