Instrukcja obsługi Rotel RMB-1504

Rotel odbiornik RMB-1504

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rotel RMB-1504 (51 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/51
Owner’s Manual
Manuel de l’utilisateur
Bedienungsanleitung
Manual de Instrucciones
Gebruikershandleiding
Manuale di istruzioni
Instruktionsbok
Инструкция пользователя
RMB-1504
Four Channel Power Amplier
Ampli cateur de Puissance 4 Canaux
Etapa de Potencia de 4 Canales
Finale di Potenza a 4 Canali
Vierkanal-Endstufe
4 Kanalen Eindversterker
4-Kanals Slutsteg
4-Канального Усилитель Мощности
2RMB-1504 Four Channel Power Amplier
WARNING: There are no user serviceable parts inside. Refer all servicing
to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose the
unit to moisture or water. Do not expose the unit to dripping or splashing.
Do not place objects filled with liquids, such as vases, on the unit. Do
not allow foreign objects to get into the enclosure. If the unit is exposed
to moisture, or a foreign object gets into the enclosure, immediately
disconnect the power cord from the wall. Take the unit to a qualified
service person for inspection and necessary repairs.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat. Do
not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
The apparatus should be used in non tropical climate.
The ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on
the apparatus.
Rotel products are designed to comply with
international directives on the Restriction of
Hazardous Substances (RoHS) in electrical and
electronic equipment and the disposal of Waste
Electrical and Electronic Equipment (WEEE). The
crossed wheelie bin symbol indicates compliance and
that the products must be appropriately recycled
or processed in accordance with these directives.
Important Safety Instructions
You must allow a minimum 10 cm or 4 inches of unobstructed
clearance around the unit.
WARNING:
The rear panel power cord connector is the mains power
disconnect device. The device must be located in an open area that
allows access to the cord connector.
The unit must be connected to a power supply only of the type and
voltage specified on the rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz)
Connect the component to the power outlet only with the supplied power
supply cable or an exact equivalent. Do not modify the supplied cable.
Do not use extension cords.
The mains plug is the disconnect of the unit. In order to completely
disconnect the unit from the supply mains, remove the main plug from
the unit and the AC power outlet. This is the only way to completely
remove mains power from the unit.
Use Class 2 wiring for speaker connections to ensure proper installation
and minimize the risk of electrical shock.
This symbol means that this unit is double insulated.
An earth connection is not required.
3
Figure 1: RMB-1504 Controls and Connections
Commandes et Branchements RMB-1504
RMB-1504 Bedienelemente und Anschlüsse
Controles y Conexiones de la RMB-1504
1
4 5 6 7
-098
2 3
RMB-1504 Bedieningselementen en aansluitingen
RMB-1504 Controlli e connessioni
RMB-1504: Kontroller och anslutningar
Органы управления и разъемы RMB-1504


Specyfikacje produktu

Marka: Rotel
Kategoria: odbiornik
Model: RMB-1504

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rotel RMB-1504, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Rotel

Rotel

Rotel A8 Instrukcja

9 Października 2024
Rotel

Rotel A11MKII Instrukcja

24 Września 2024
Rotel

Rotel A10MKII Instrukcja

24 Września 2024
Rotel

Rotel RA11 Instrukcja

6 Września 2024
Rotel

Rotel RSX-972 Instrukcja

1 Września 2024
Rotel

Rotel RKB-650 Instrukcja

1 Września 2024
Rotel

Rotel RB-1590 Instrukcja

29 Sierpnia 2024
Rotel

Rotel A11 Instrukcja

21 Sierpnia 2024
Rotel

Rotel RSX-965 Instrukcja

20 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik