Instrukcja obsługi Rotel RB-1070

Rotel odbiornik RB-1070

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rotel RB-1070 (35 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/35

Owner’s Manual

Manuel d’utilisation

Bedienungsanleitung

Manuale di Istruzioni

Manual de Instrucciones

Gebruiksaanwijzing

RB-1070

Stereo Power Amplifier

Amplificateur De Puissance Stéréo

Stereo-Endstufe

Finale di Potenza Stereo

Etapa de Potencia Estereofónica

Stereo Eindversterker

POWER

POWE R AMPLIF IER

RB-1070

PROTEC T ION

BRIDGED MO NO

WARNING: There are no user serviceable parts in-

side. Refer all servicing to qualified service person-

nel.

WARNING: To reduce the risk of fire or electric shock,

do not expose the unit to moisture or water. Do not

allow foreign objects to get into the enclosure. If the

unit is exposed to moisture, or a foreign object gets

into the enclosure, immediately disconnect the power

cord from the wall. Take the unit to a qualified ser-

vice person for inspection and necessary repairs.

Read all the instructions before connecting or operating the

component. Keep this manual so you can refer to these safety

instructions.

Heed all warnings and safety information in these instruc-

tions and on the product itself. Follow all operating instruc-

tions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clearance

around the unit. Do not place the unit on a bed, sofa, rug, or

similar surface that could block the ventilation slots. If the

component is placed in a bookcase or cabinet, there must be

ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves,

or any other appliance that produces heat.

The unit must be connected to a power supply only of the type

and voltage specified on the rear panel of the unit.

Connect the component to the power outlet only with the sup-

plied power supply cable or an exact equivalent. Do not modify

the supplied cable in any way. Do not attempt to defeat ground-

ing and/or polarization provisions. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched,

bent at severe angles, exposed to heat, or damaged in any

way. Pay particular attention to the power cord at the plug

and where it exits the back of the unit.

The power cord should be unplugged from the wall outlet if

the unit is to be left unused for a long period of time.

Immediately stop using the component and have it inspected

and/or serviced by a qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough to sup-

port its weight. Do not place it on a moveable cart that could

tip over.

RB-1070 Stereo Power Amplifier

Figure 1: Controls and Connections

Commandes et branchements

Bedienelemente und Anschlüsse

Controlli e collegamenti

Controles y Conexiones

De bedieningsorganen en aansluitingen

English

POWER

POWER AMPLIFIER

RB-1070

PROTECT ION

BRIDGED MONO

1 2 3 4

LEFT

RIGHT

SPEAKERS

WARNING:TO REDUCE T HE RISK

OF FIRE OR EL ECT RICAL SHOCK,

DO NOT EXPOSE T HIS EQUIPMENT

TO RAIN OR MOIST URE.

CAUT ION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: WARNING SHOCK HAZARD – DO NOT OPEN

AVIS: RISQUE DE CHOC ELECTRIQUE–NE PAS OUVRIR

SPEAKER IMPEDANCE

STEREO 4 OHMS MINIMUM

BRIDGED 8 OHMS MINIMUM

POWER AMPLIFIER

MODEL NO. RB-1070

POWER CONSUMPTION: 400W

SERIAL NO.

LEFT INPUTRIGHT INPUT

12V TRIGGER

IN OUT

OFF

8 9 85 6 7 10

Specyfikacje produktu

Marka:	Rotel
Kategoria:	odbiornik
Model:	RB-1070
Kolor produktu:	Czarny, Srebrny
Wysokość produktu:	121 mm
Szerokość produktu:	433 mm
Głębokość produktu:	334 mm
Waga produktu:	10200 g
Kanały wyjścia audio:	- kan.
Pobór mocy:	400 W
Moc szczytowa na kanał:	130 W
Współczynnik zawartości harmonicznych:	0.03 %
Stosunek sygnału do szumu:	120 dB
Zasięg częstotliwości:	4 - 100000 Hz
Czułość wejścia:	1000 mV
Impedancja wejściowa:	33000 Ω
Współczynnik tłumienia:	500