Instrukcja obsługi Ross-Tech 80310


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ross-Tech 80310 (76 stron) w kategorii skaner. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/76
U Manualser’s
Diagnostic Software for
VW/Audi/SEAT/Skoda
2015 Edition
Copyright (c) 2000-2015
by Ross-Tech, LLC.
881 Sumneytown Pike
Lansdale, PA 19446
+1- - -2300 267 638
www.Ross-Tech.com
Disclaimer:
All rights reserved, No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Ross-Tech, LLC. The
information contained herein is designed only for use with diagnostic softwareVCDS .
Ross-Tech, LLC. is not responsible for any use of this information as applied to this or other
diagnostic equipment.
Neither Ross-Tech, LLC. nor its aliates shall be liable to the purchaser of this product or
third parties for damages, losses, costs, or expenses incurred by purchaser or third parties
as a result of: accident, misuse, or abuse of this product or unauthorized modications,
repairs, or alterations to this product, or failure to comply with Ross-Tech, LLC’s written
instructions.
By using , you acknowledge that this Program is provided "as is" and "with all faults, VCDS
defects and errors" and that all use of the Program is at your own full risk. It has been
extensively tested, but we cannot guarantee it will work correctly with every system in every
car. We will make our best eort to x any bugs and to enhance the program, but we
specically disclaim any liability for damage to your computer or your car, and we do not
promise to have any particular enhancements available on any specic date.
Copyright © 2015 by Ross-Tech, LLC
VCDS Table of Contents
Subject
Section
Getting Started
1
Main Screen
2
Auto-Scan
3
Select Control Module
4
Open Controller
5
Fault Codes
6
Measuring Blocks
7
Data Logging
8
Single Reading
9
Supported Codes
10
Readiness
11
Advanced Identication
12
Advanced Measuring Values
13
Acceleration Measurement
14
Login
15
7-digit PIN/SKC Dialog
16
Basic Settings
17
Output Tests
18
Recode / Long Coding
19
Adaptation
20
Security Access
21
SRI Reset
22
Generic OBD2
23
Applications
24
Transport Mode
25
Controller Channels Map
26
EDC- - Milea 15 16 ge
27
Control Module Finder
28
Optical Bus Diagnostics
29
Options
30
About
31
VC-Scope
32
TDI Timing Checker
33
What’s New
34
Please refer to our website for the VCDS FAQ, Problems/Issues, and Function pages:
http://www.ross-tech.com/vag-com/vag-com-faq.html
http://www.ross-tech.com/vag-com/issues.html
http://www.ross-tech.com/vag-com/vag-functions.html


Specyfikacje produktu

Marka: Ross-Tech
Kategoria: skaner
Model: 80310

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ross-Tech 80310, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje skaner Ross-Tech

Ross-Tech

Ross-Tech 80310 Instrukcja

15 Września 2024

Instrukcje skaner

Najnowsze instrukcje dla skaner

Medion

Medion MD 90090 Instrukcja

9 Października 2024
Medion

Medion MD 90009 Instrukcja

9 Października 2024
Ricoh

Ricoh fi-70F Instrukcja

8 Października 2024
Reflecta

Reflecta x44-Scan Instrukcja

8 Października 2024
Plustek

Plustek eScan A280 Instrukcja

7 Października 2024
Kogan

Kogan KA16PFSCNA Instrukcja

7 Października 2024
Kodak

Kodak Sidekick 1400U Instrukcja

6 Października 2024
Microtek

Microtek Scanmaker i800 Instrukcja

4 Października 2024