Instrukcja obsługi Rollei Giro 28 AFS

Rollei kamera Giro 28 AFS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rollei Giro 28 AFS (7 stron) w kategorii kamera. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/7
7
CONTENTS
NAME OF PARTS ........................................... 8
ATTACHING THE STRAP .............................. 9
INSERTING THE BATTERY ........................... 9
SETTING THE FILM SPEED ........................ 10
LOADING THE FILM .................................... 10
HOLDING YOUR CAMERA .......................... 11
BATTERY CHECK LAMP ............................ 11
RED-EYE REDUCTION LED ....................... 11
AUTO FLASH PHOTOGRAPHY .................. 12
USING THE SELF-TIMER ............................ 12
TAKING PICTURES ..................................... 13
AUTO-FOCUS SHOOTING .......................... 13
REWINDING THE FILM ................................ 14
MID-ROLL REWIND ..................................... 14
TAKING CARE OF YOUR CAMERA ............ 15
WARRANTY POLICY ................................... 16
SPECIFICATIONS ........................................ 17
¥…'RƒW-1 10/5/00, 9:06 AM7
98
NAME OF PARTS ATTACHING THE STRAP(Fig. 1)
1. Insert the loop at the end of the Strap under the
Strap Eyelet.
2. Insert the other end of the Strap through the
loop and tie the Strap onto the Strap Eyelet.
INSERTING THE BATTERY
1. Open the Battery Chamber Cover in the direc-
tion of the arrow by pulling it out.(Fig. 2)
2. Insert the AA-size batteires.checking that(+)
and (-) on the battery are aligned according to
the polarity information Inside the Battery
Chamber.(Fig. 3)
3. Close the Battery Chamber Cover by pushing
it until it latches.
bn
Film Take-up Spool
bo
Finder Eyepiece
bp
Flash ready monitor
bq
Film Rewind Shaft
br
Film Chamber
bs
Film Guides
bt
Tripod Socket
ck
Battery Chamber Cover
cl
Strap Eyelet
cm
Film Check Window
cn
Back Cover
co
Battery check lamp
1
Built-in Flash
2
Lamp for Red-Eye-Reduction /Self-timer
3
Film Counter Window
4
Mid-roll Rewind Button
5
Self-timer Button
6
Shutter Release Button
7
Auto-focus Sensor Windows
8
Auto Exposure Metering Window
9
Viewfinder Window
bk
Lens Cover/Lens
bl
Lens Cover Switch
bm
Back Cover Lock
NOTES:
• Do not use Nickel Cadmium batteries.
• With the battery Inserted lncorrectly,the camera
will not work.Make sure the battery is installed
as shown in .Fig.3
Remove AA batteries from the camera when you
do not expect to use it for a long period time.
Don't try to break up or recharge the battery or
throw it into fire.
• Keep the battery out of the reach of children.
• Please replace the battery,while flash charging
time is longer than 10 seconds.
¥…'RƒW-1 10/5/00, 9:06 AM8-9
1110
HOLDING YOUR CAMERA(Fig. 8)
Always use both hands to steady your camera.
When holding the camera vertically always po-
sition it with the flash at the top.
Be careful not to place your fingers over the lens
or flash.
BATTERY CHECK LAMP(red light)
When the Battery check lamp is blinking, it could
finish at least one 36 exp. film by remaining battery
power. Please replace to new battery when you
finish the last one film.
When the Battery check lamp is turning light. Any
function of this camera will stop work. Please
replace to new battery immediately.
RED-EYE REDUCTION LED
(Fig.10)
SETTING THE FILM SPEED (Fig.4)
1. This camera is designed to use DX-coded films
with ISO ranging from 100 to 400.
2. Your camera automatically sets the correct film
speed by reading black-and-silver patches on
the film cassettes.
LOADING THE FILM
1. Push the Back Cover Lock downward to open
(Fig.5)
2. Load the film cassette into the Film Chamber
and pull out enough film leader to extend past
the film Leader Mark.(Fig.6)
3. Make sure the film stays within the Film Guides
and lies flat.
4. Press the Back Cover shut so that the Back
cover lock returns to its original position.
5. No matter that the lens cover is open or close,
the film will advance to the first exposure frame
automatically and the exposuer counter ad-
vance to"1".
* If the exposure counter does not advance,open
the back cover and reload the film.
* Whether there is film cassette in the camera or
not,can be identified through the Film Check
Window.
This camera is designed to activate Red-eye
Reduction automatically. This makes it possible to
minimize the red-eye effect that sometimes occurs
when taking portrait photographs with flash. Now
it’s easy for anyone to take superior shots of people.
Press the Release button smoothly to half way and
hold there for at least one second to light on the
Red-eye Reduction LED. The Red-eye Reduction
LED only light in 10 sec. max if you keep on press
Release button in half way.
AUTO FLASH PHOTOGRAPHY
¥…'RƒW-1 10/5/00, 9:06 AM10-11


Specyfikacje produktu

Marka: Rollei
Kategoria: kamera
Model: Giro 28 AFS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rollei Giro 28 AFS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kamera Rollei

Rollei

Rollei Giro 105 Instrukcja

6 Października 2024
Rollei

Rollei Compactline 52 Instrukcja

5 Października 2024
Rollei

Rollei 4.0FW Instrukcja

26 Września 2024
Rollei

Rollei 35RF Instrukcja

26 Września 2024
Rollei

Rollei C26 Instrukcja

26 Września 2024
Rollei

Rollei Prego dp5200 Instrukcja

10 Września 2024

Instrukcje kamera

Najnowsze instrukcje dla kamera

Canon

Canon WFT-E9 Instrukcja

13 Stycznia 2025
Mamiya

Mamiya C330 Instrukcja

12 Stycznia 2025
Pentax

Pentax Optio S40 Instrukcja

11 Stycznia 2025
Pentax

Pentax Optio S5i Instrukcja

11 Stycznia 2025
Elmo

Elmo MA-1 Instrukcja

11 Stycznia 2025
Leica

Leica M11-D Instrukcja

5 Stycznia 2025