Instrukcja obsługi Robbe Grob G 120TP

Robbe Zabawki sterowane radiem Grob G 120TP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Robbe Grob G 120TP (34 stron) w kategorii Zabawki sterowane radiem. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/34

Building and Operating Instructions

Notice de montage et de mise en œuvre

Istruzioni di montaggio e d’uso

Grob G 120TP

Nano-Racer

No. 2598

Building and Operating Instructions - Grob G 120TP Nano-Racer No. 2598

Dear customer,

Congratulations on your choice of a factory-assembled

model aircraft from the robbe Modellsport range. Many

thanks for placing your trust in us.

The model can be ready for the air when you have completed

just a few simple procedures. Please read right through

these instructions and the separate information sheets

before attempting to assemble and fly the model, as this will

make it much easier to complete the tasks required.

Please study the illustrations and the brief instructions to

obtain a clear understanding of the individual stages of

construction. All parts must be trial-fitted “dry” (without glue)

before you reach for the glue. Assign the individual compon-

ents to the various stages of assembly.

The servos are already installed, and connected to the con-

trol surfaces.

The model

Like the full-size machine and our large Grob G120TP 1700

mm ARF model, this nano-model is extremely fast and fully

aerobatic, while its broad speed range is also ideal for realis-

tic flying in the scale style. The model's aerobatic repertoire

can be expanded by installing the optional rudder servo and

linkage. The aeroplane is based on a one-piece painted

foam moulding incorporating fuselage and wings. The wing

features a carbon fibre spar for additional strength, making

it capable of withstanding extreme loads in racing and aero-

batic flying.

We constantly strive to update our products to reflect the

latest developments. You can find details of technical

improvements, updates and revised documentation on

the Internet by calling up the appropriate product

description at our website: www.robbe.com.

Specification:

Total surface area approx.: 9 dm2

All-up weight approx.: 370 g

Wing loading approx.: 43.3 g/dm2

Length approx.: 660 mm

Wingspan approx. 735 mm

Scale: 1:14

RC functions:

Elevator, aileron, throttle, rudder (optional)

Notes regarding the radio control system:

For this model you require a radio control system with at least

four channels.

The receiving system is powered by the speed controller’s

integral BEC system.

Set contents:

• Set of painted EPO foam components, with decals applied

(fuselage / wing, ﬁn, tailplane, fuselage hatch incl. cockpit)

• Painted plastic cowl

• Factory-ﬁtted brushless motor and speed controller

• 5.5 x 4.5" propeller, spinner and driver

• 3 x servos installed

• Multi-lingual assembly instructions

Essential accessories:

Description Order No.

Adhesive: Robbe Speed Type 2 5063

Optional accessories:

Rudder upgrade kit for Nano-Racer 2600

Please see the robbe main catalogue for details of tools and

accessories.

Servo leads with differing colour codes are used in the model:

Signal: white / orange

Positive wire: red / red

Negative wire: black / brown

Please bear this in mind when connecting or extending the leads.

Before you check the model's working systems, set the con-

trol surfaces to neutral from the transmitter (transmitter sticks

and trims central).

When you wish to ﬂy the model always move the throttle stick

to the “motor stopped” position before switching the trans-

mitter on. Only then connect the battery. To switch off, ﬁrst

disconnect the ﬂight pack from the speed controller, and only

then switch the transmitter off. When installing or setting up

the receiving system components, including the speed cont-

roller and motor, be sure to read and observe the instructions

supplied with them. You should also read right through the

instructions and safety information supplied with the battery

pack and charger before using these items for the ﬁrst time.

Preparing the glued joints:

Use 240-grit abrasive paper to sand the paint from all joint

surfaces before applying the glue.

All directions, such as “right-hand”, are as seen from the

tail of the model, looking forward.

Replacement parts:

Order No. Description

25980001 Grob G 120TP Nano-Racer cowl

25980002 Grob G 120TP Nano-Racer linkage set

25980003 Grob G 120TP Nano-Racer spinner

25980004 Grob G 120TP Nano-Racer motor mount set

25980005 Grob G 120TP Nano-Racer canopy

25980006 Grob G 120TP Nano-Racer decals

Specyfikacje produktu

Marka:	Robbe
Kategoria:	Zabawki sterowane radiem
Model:	Grob G 120TP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Robbe Grob G 120TP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Zabawki sterowane radiem Robbe

Robbe Air Beaver Instrukcja

2 Października 2024

Robbe Arcus E 2.2 Instrukcja

2 Października 2024

Robbe ROXXY BL-Control 820 Instrukcja

2 Października 2024

Robbe 1-F1666 Instrukcja

2 Października 2024

Robbe ROXXY BL-Control 975-12 Instrukcja

2 Października 2024

Robbe Pilatus PC21 Instrukcja

2 Października 2024

Robbe Arcus Instrukcja

2 Października 2024

Robbe Arcus II Instrukcja

2 Października 2024

Robbe Nano-Vector Instrukcja

2 Października 2024

Robbe Programmer V2 Instrukcja

2 Października 2024

Instrukcje Zabawki sterowane radiem

Najnowsze instrukcje dla Zabawki sterowane radiem

Spektrum AR6600T Instrukcja

15 Października 2024

Amewi Hyper Go Instrukcja

9 Października 2024

Carson Drift Burner Instrukcja

9 Października 2024

Carson Micro X-Warrior 2.0 Instrukcja

9 Października 2024

Hobbywing XeRun XR10 Pro WP Instrukcja

9 Października 2024

Hobbywing XeRun XR10 Stock Spec G2 Instrukcja

9 Października 2024

Hobbywing XeRun XR10 Justock G3S Instrukcja

9 Października 2024

Hobbywing XeRun XR8 PRO G3 Instrukcja

9 Października 2024

Hobbywing XeRun XR10 Justock G3 Handout Instrukcja

9 Października 2024

Hobbywing XeRun XR8 Plus G2S Instrukcja

9 Października 2024