Instrukcja obsługi Roadstar TS-810/SS

Roadstar Opiekacz TS-810/SS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roadstar TS-810/SS (13 stron) w kategorii Opiekacz. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/13
COOL TOUCH WALL TOASTER.
TS-810/SS
is a registered Trademark of Roadstar S.A. - Switzerland All rights reserved
Instruction manual
Bedienungsanleitung
Manuel d’instructions
Manuale d’istruzioni
Manual de instrucciones
Manual de instruções
www.roadstar.com
Roadstar Management SA, via passeggiata 7, 6883 Novazzano (Switzerland)
EnglishEnglish
1 2
TS-810/SS
Cool touch wall Toaster
Before Use
Carefully remove your toaster from its packaging.
You may wish to store the packaging for future use.Otherwise dispose the packaging according
to the local rules on recycling.
Please read this instruction manual carefully and familiarize yourself with your new Toaster
before using it for the first time. Please retain this manual for future reference.
BOX CONTENTS
• Toaster TS-810/SS
• Instruction manual
• Warranty card
ELECTRICAL SAFETY
Caution: For your own safety read the following instructions carefully before attempting to connect
this unit to the mains. Before switching on make sure that the voltage of your electricity supply is
the same as that indicated on the rating plate.
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other power
sources may damage the unit. Do not allow this unit to be exposed to rain or moisture.
SAFETY INSTRUCTIONS
Please read this instruction book carefully before operating this toaster.
Retain for future reference.
Positioning your Toaster
Caution: Bread can burn. Do not place or operate the toaster below curtains or other combustible
materials. Do not leave the toaster unattended when in use.
• Do not operate the toaster underneath cupboard units. Ensure the toaster is placed
away from walls.
• Always allow the toaster to cool completely after use before moving it.
• Never move the toaster by placing fingers in or near the bread slot.
Safety
• Ensure the mains lead is kept clear from hot objects and surfaces.
• Ensure close supervision when operating toaster while children are present.
• Always allow the toaster to cool completely after use before storing it.
• Ensure bread fits easily into the slot before using toaster. Torn or thick bread can
cause the toaster to jam.
• NEVER attempt to remove bread if it becomes jammed in the slot, without first
unplugging the toaster from the mains supply. Allow to cool completely before
removal.
• Take care not to damage the internal mechanism when removing bread.
• Internal parts can be easily damaged. Do not touch the internal parts of the toaster with
any implement as this is very dangerous and could cause an electrical hazard.
Special Notes:
When the toaster is plugged in and operating for the first time, there may be a slight burning
odour, as the heating elements warm up. This represents no danger to the user and does not
indicate a defect in the appliance. When using for the first time, allow the toaster to heat up until
the odour clears.
It is advisable to first operate the toaster without placing bread in the slot.
1. Connect the toaster to the mains supply .
2. Set the browning control (B) to the lowest setting (1).
3. Press the loading handle (A) down and allow the heating elements to warm.
4. Allow elements to heat up until burning odour clears.
5. Press CANCEL button (C) to release loading handle.
FEATURES
A. Loading Handle
B. Variable Browning Control
C. CANCEL Button
D. Removable crumb tray
TOASTERS MUST NEVER BE LEFT UNATTENDED WHEN IN USE.
ACCESSIBLE SURFACES CAN REACH HIGH TEMPERATURES DURING OPERATION.
TOASTER OPERATION
• Ensure the toaster is connected to mains supply.
• Place one or two slices of bread or toasts into the slot, adjust the browning control (B)
to achieve the amount of toasting desired, then depress the loading handle (A) until it
latches.
• The toaster will heat up automatically and start toasting.
Note: The loading handle (A) will not latch if the mains supply is not connected.
• To stop toasting press the CANCEL button (C) at any time.
• Lift the loading handle (A) to check the bread during toasting.
• When toasting is finished the loading handle (A) will rise automatically. The toast can
then be safely removed.
• If the toast is not dark enough, you may wish to toast the bread again.
• Adjust the browning control (B) to a lower setting and replace the toast. Ensure the toast
does not burn while re-toasting.
EnglishEnglish
3 4
Browning Control
The browning control enables adjustment of toasting time, this is adjustable from 1 to 6:
• 1 - 2: for light toasting & bun warming
• 3 - 4: for medium toasting
• 5 - 6: for dark toast
Note: Use a low setting for thin dry slices. If toasting more than one slice, be sure to use
slices with an even thickness, to achieve even toasting.
CANCEL Function
• Press the CANCEL button (C) if bread starts to smoke.
• The CANCEL button (C) can be pressed at any time during toasting.
Toasting Tips
The amount of moisture can vary in different types of bread - this can result in different
toasting settings.
• Slightly dry bread requires a lower setting (1-2).
• Fresh or wholewheat bread requires a medium to high setting (4-5).
• Uneven bread requires a high setting (5) .
• Thick bread slices, crumpets, bagels and muffins sometimes require toasting twice
before the desired results are achieved.
• Remove any loose grain, seeds or raisins before toasting fruit breads or wholegrain
slices. This helps prevent a buildup of oversize crumbs in the toaster.
• A low setting (1-2) should be used when toasting single slices of bread.
Caution
Bread should fit easily into the toaster - never force thickly sliced bread into the toasting slot
Do not toast buttered bread.
Using the high lift release
If small bread is toasted, this may be removed more easily by lifting the bread carriage lever.
Using the Crumb tray
Crumbs will accumulate in the crumb tray and could catch fire if not emptied periodically. When
the toaster has cooled down completely, tap the sides of the case lightly to dislodge any crumbs
lodged in the toasting chamber and pull out the crumb tray. Empty the tray and replace it.
Never operate the toaster without the crumb tray fitted.
Additional points
• In order to achieve uniform browning, we recommend you wait a minimum of 30 seconds
between each toasting, so that the control can automatically be reset.
• If toasting one slice only, you may need to adjust the browning control to a slightly lower setting.
• Note: you will also notice a slight variation in toast color on one side of a single slice.
• Stale bread toasts more rapidly than fresh bread. The browning control should be set at
a lower setting than usual.
• All sorts of bread can be used as well as teacakes, small rolls etc., Slices should not
however be so thick as to cause burning or jamming within the bread slot.
• When toasting 2 slices it is recommended they are of equal size and freshness.
• Allow the toaster to cool fully before putting away.
CARE & MAINTENANCE
Cleaning
Note: Remove plug from mains supply and allow toaster to cool completely before
cleaning.
• Only clean the outer surfaces of the toaster with a soft, barely damp cloth.
• Do not allow crumbs to build up inside the toaster.
• Crumbs can be removed by pulling out the crumb tray, located at the end of the toaster,
and clearing any build up with a damp cloth.
• Internal parts can be easily damaged. Do not touch the internal parts of the toaster with any
implement as this is very dangerous and could cause an electrical hazard.
Servicing
• If you drop or damage your toaster, do not use it until it has been examined by an
authorised service centre.
• For servicing of this appliance, refer to an authorised service centre.
SPECIFICATIONS
Voltage 220 - 240V ~ 50 Hz
Power 600 - 700 Watts
Nota: Specifications and design are subject to possible modifications without notice
due to improvement.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.

Specyfikacje produktu

Marka: Roadstar
Kategoria: Opiekacz
Model: TS-810/SS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roadstar TS-810/SS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Opiekacz Roadstar

Roadstar

Roadstar TS-810/SS Instrukcja

8 Września 2024

Instrukcje Opiekacz

Najnowsze instrukcje dla Opiekacz

Imetec

Imetec Dolcevita SM2 Instrukcja

15 Października 2024
Koenic

Koenic KTO 110 Instrukcja

14 Października 2024
Domo

Domo DO-950T Instrukcja

14 Października 2024
Tefal

Tefal Delight TT8101 Instrukcja

14 Października 2024
Solis

Solis Toaster Steel 8002 Instrukcja

14 Października 2024
Exquisit

Exquisit TA 3102 swi Instrukcja

14 Października 2024
Kenwood

Kenwood TTP230 Instrukcja

13 Października 2024
Kenwood

Kenwood KSense TCM400 Instrukcja

10 Października 2024
Morphy Richards

Morphy Richards Aspect 240003EE Instrukcja

10 Października 2024
Tefal

Tefal Express LS TL3562 Instrukcja

10 Października 2024