Instrukcja obsługi Roadstar PST-100ENC

Roadstar system hi-fi PST-100ENC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roadstar PST-100ENC (7 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/7
R
AUTOREVERSE CASSETTE TAPE WITH
USB OUTPUT TO ENCODE TAPE AUDIO
TO ELECTRONIC FILES VIA PC.
PST-100ENC
R
AUDIO VIDEO
is a registered Trademark of Roadstar S.A. - Switzerland All rights reserved
Instruction manual
Bedienungsanleitung
Manuel d’instructions
Manuale d’istruzioni
Manual de instrucciones
Manual de instruções
Roadstar Management SA
via Passeggiata 7, CH 6883
Novazzano (Switzerland)
1 2
This unit must not be exposed to moisture or rain.
Ensure all connections are properly made before operating the unit.
Do not expose this unit to direct sunlight or heat radiating sources.
Make sure all batteries are inserted according to the proper
polarity. Do not mix old batteries with new ones.
If the unit is not used for a long period of time (more than 1 month),
remove all batteries from their compartment to avoid possible leaking.
- +
- +
WARNINGS
PST-100ENC
Personal Autoreverse Stereo Cassette Player with USB output to encode Audio
files via PC.
FUNCTIONS AND CONTROLS
1. Play Button
2. Direction Selector
3. Continuous AR/Single AR
4. FF Button
5. REW Button
6. Stop Button
7. Volume Control
8. USB Output
9. Eadphone Output
10. Cassette Door OPEN
11. Battery Compartment
12. External DC-3V
POWER SUPPLY
Use with regular batteries
1. Open the battery compartment door, located on behind the cassette door of the unit, by
sliding the door and lift it up.
2. Insert 2 x 1.5V /UM-3/AA size alkaline batteries, following the correct polarity, as indicated
on the unit.
3. Close the battery compartment door.
Use with AC/DC adaptor (not included)
1. Insert the DC plug, at the end of the AC/DC adaptor cord, into the DC 3V INPUT socket
located on the side of the unit (12).
2. Connect the AC/DC adaptor into a 230V ~ 50Hz AC power outlet.
Notes:
• If the AC adaptor is connected when regular batteries are installed, the power supply
automatically switches to the AC power source.
• Use only the recommended AC/DC adaptor. Using other types of adaptor may damage
the unit.
• Make sure that the AC/DC adaptor matches with your household voltage before
connecting it into the wall outlet.
• When not using AC power, disconnect the AC/DC adaptor from the wall outlet.
• Do not touch the AC/DC adaptor with wet hands.
PHONES JACK
Connect the stereo earphones to the Phones jack (9) for private listening.
CASSETTE PLAYBACK
Playback
1. Press the STOP button.
2. Open the cassette compartment door.
3. Insert a recorded cassette with the exposed tape pacing cassette keys.
4. Close the cassette compartment door.
5. Connect the headphones.
6. Press the Play button to start playback.
7. Adjust the Volume control to your desired listening level.
8. Press the Stop button to stop playback at any time.
Fast Forward Function
Press the Fast Forward button (4) to fast forward the tape.
ATTENTION!
Extended listening at high volumes can cause damages to hearing.
English English
3 4
Rewind Function
Press the REW button (5) to rewind the tape.
Note: When the tape reaches the end in Fast Forward or Rewind modes, the power remains
on and the motor continues to rotate. Press the Stop Button to release the Fast Forward or
Reverse button to cut the power supply off.
Continuous Autoreverse/Single Autoreverse Selector
Select continuous Autoreverse to play continuously both sides of the tape.
Select Single Autoreverse to play both sides of the tape, then the tape will stop.
SPECIFICATIONS
Tape speed 4.75 cm/sec.
Output power 20mW @ 10% THD
Earpiece impedance 32 Ohm
Power source DC 3V (1.5 V x 2 R06/AA /UM-3 batteries)
Due to continuous improvements, the specifications and the design are subject to
modifications without prior notice. PST-100ENC
Tragbarer Autoreverse-Kassetten-Spieler mit USB.
BEDIENUNGSELEMENTE
1. Wiedergabetaste
2. Richtungs-Wahlschalter
3. Kontinuierlich AR/Einzel AR
4. Schnellvorlauf-Taste
5. Rückspultaste
6. Stop-Taste
7. Lautstärke-Regler
8. USB-buchse
9. Stereo-Kopfhörerbuchse
10. Kassettenfach-Klappe
11. Batterie-Abdeckung
12. 3V-DC-EINGANGS-Buchse
STROMVERSORGUNG
Betrieb mit normalen Batterien
1. Öffnen Sie den Batteriefachdeckel, der sich auf der unteren Seite des Gerätes
SICHERHEITSHINWEISE
Setzen Sie das Gerät weder Feuchtigkeit noch Regen aus.
Schalten Sie das System erst dann ein, wenn Sie alle Verbindungen genau
geprüft haben.
Setzen Sie das Gerät weder direkter Sonneneinstrahlung noch
Wärmequellen aus.
Beim Einlegen der Batterien achten Sie auf die richtige Polarität. Benützen
Sie keine neue Batterien zusammen mit alten oder entladenen Batterien.
Bei längerer Nichtbenutzung des Gerätes (mehr als einen Monat) nehmen
Sie die Batterien heraus, um das Auslaufen und damit Schäden amGerät
zu vermeiden.
- +
- +
ACHTUNG!
Längeres Hören bei hoher Lautstärke kann Gehörschäden
verursachen.
Deutsch
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.

Specyfikacje produktu

Marka: Roadstar
Kategoria: system hi-fi
Model: PST-100ENC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roadstar PST-100ENC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi Roadstar

Roadstar

Roadstar MP-425N Instrukcja

23 Września 2024
Roadstar

Roadstar HIF-1990BT Instrukcja

15 Września 2024
Roadstar

Roadstar HIF-3650UMP Instrukcja

14 Września 2024
Roadstar

Roadstar RU-275 Instrukcja

4 Września 2024
Roadstar

Roadstar HIF-1898D+BT Instrukcja

4 Września 2024
Roadstar

Roadstar HIF-1937TUMPK Instrukcja

1 Września 2024
Roadstar

Roadstar HIF-5988 Instrukcja

1 Września 2024
Roadstar

Roadstar HIF-1902HP Instrukcja

31 Sierpnia 2024
Roadstar

Roadstar HIF-1850TUMPK Instrukcja

29 Sierpnia 2024
Roadstar

Roadstar HIF-1893TUMPK Instrukcja

29 Sierpnia 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

Philips

Philips TAM3205M2 Instrukcja

14 Stycznia 2025
Philips

Philips TAM3505M2 Instrukcja

14 Stycznia 2025
OSD Audio

OSD Audio Nero Stream ARC Instrukcja

14 Stycznia 2025
Morel

Morel SUB-8X Instrukcja

14 Stycznia 2025
Morel

Morel BEAT-X Instrukcja

14 Stycznia 2025
Morel

Morel Sopran 634 Instrukcja

14 Stycznia 2025
Klipsch

Klipsch HD Theater 500 Instrukcja

14 Stycznia 2025
Lenco

Lenco MC-129 MP3 Instrukcja

13 Stycznia 2025
Terratec

Terratec HA-1 Charge Instrukcja

13 Stycznia 2025
Thomson

Thomson MIC400BT Instrukcja

12 Stycznia 2025