Instrukcja obsługi Roadstar HIF-3650UMP

Roadstar system hi-fi HIF-3650UMP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roadstar HIF-3650UMP (12 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
is a registered Trademark of Roadstar S.A. - Switzerland All rights reserved
www.roadstar.com
Roadstar management SA, via Passeggiata 7 CH 6883 Novazzano (Switzerland)
HIF-3650UMP
Instruction manual
Bedienungsanleitung
HOME MICRO HI-FI SYSTEM WITH
MW/FM-STEREO CD/CD-R/CD-RW RADIO,
USB MP3 PLAYER . AND ALARM CLOCK
EnglishEnglish 1 2
HIF-3650UMP
Micro Hifi System with Compact Disc / MP3 Player, USB, MW/FM-stereo
radio and Remote Control.
INSTRUCTION MANUAL
Please read this instruction manual carefully and familiarize yourself with your new HiFi
system before using it for the first time. Please retain this manual for future reference.
WARNINGS
The exclamation point within the triangle is a warning sign alerting
the user of import ant inst ructions acc ompanyi ng the
product.
The lightening flash with arrowhead symbol within the triangle is a
warning sign alerting the user of “dangerous voltage” inside the unit.
To reduce the risk of electric shock, do not remove the cover. No
user serviceable parts inside the unit. Refer all servicing to
qualified personnel.
This unit employs a laser. Only a qualified service person should
remove the cover or attempt to service this device, due to
possible eye injury.
Invisible laser radiation when the unit is opened or interlocks de-
feated. Avoid exposure to laser beam. Use of controls,
adjustments or procedures other than those specified herein may
result in hazardous radiation exposure.
This unit operates on 230V ~ 50Hz. If the unit is not used for a long
period of time, remove the plug from the AC mains.
This unit must not be exposed to moisture or rain.
The power switch in this unit is mounted on the secondary
circuit and does not disconnect the whole unit from the mains in
OFF position.
Ensure all connections are properly made before operating the unit.
This unit should be positioned so that it is properly ventilated. Avoid
placing it, for example, close to curtains, on the carpet or in a built-
in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
1
2
3
4
5
6
7
89
10
11
12
13 14
16 17
18
19
20
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial
wastes for disposal.
15
EnglishEnglish
LOCATION OF CONTROLS
1. Power cord
2. Antenna
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the same as that indicated
on the rating plate.
For your own safety read the following instructions carefully before attempting to connect this unit to
the mains.
MAINS (AC) OPERATION
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other power sources
may damage the unit.
CAUTION
To prevent electric shock disconnect from the mains before removing cover. No user serviceable parts
inside. Refer servicing to qualified service personnel.
SAFETY PRECAUTION
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: 230V 50Hz - AC only
This symbol means that this unit is double insulated. An earth connection is not required.
POWER SUPPLY
Remove the stereo carefully from the box, retaining the packaging for future use.
AC POWER OPERATION
Connect the plug to a mains power inlet 230V AC ~ 50 Hz.
CONNECTIONS
SPEAKER CONNECTION
Connect each speaker to the corresponding speaker terminals (16 / 17) on the back of the system.
Ensure that the left speaker is connected to the left terminals, and the right speaker to the right terminals.
MW/FM TUNER
OPERATION
• the Function Selector sequentially (11) until the RADIO AM or FM compare in thePress
display.
• Tune to the desired radio station by turning the Tuning control (10).
• To POWER OFF press the Function Selector (11) three seconds.
ANTENNA
• For FM reception there is a built-in FM antenna wire at the rear of the unit (2). Move the wire
around to obtain the best reception.
• For MW reception the signals are picked up through a built-in ferrite antenna. Your may have
to orient the unit to obtain the best reception.
in the display.
CLOCK SETTING
1. Make sure the unit is in standby mode.
2. Press and hold “CLOCK SET” (13) button until the unit entered the year setting.
3. Press “SKIP +” (8) or “SKIP -” (9) to select the desired year.
4. Press “Clock Set” (13) button once to confirm
3 4
skip button
10. Tuning Control
11. Function Selector (RADIO/USB/CD/AUX)
12. Remote sensor
13. Mode Display / Clock / Repeat / Program Button
14. Album button
15. CD Open corner
16. Left Speaker (L)
17. Right Speaker (R)
18. AUX-IN
19. Eadphone output
20. Snooze button
FM-STEREO RECEPTION
• Stereo reception is possible when the tuned FM station is broadcasting in stereo.
• When in FM mode and the station is broadscasting in Stereo, the STEREO indicator compare
7. CD/USB /Pause- Play Button ( II)
FM
3. LCD Display
4. USB Port input
5. volume up /Alarm 1
6. volume down / Alarm 2
8. Forward CD/USB Skip/Search Button
9. CD/USB

Specyfikacje produktu

Marka: Roadstar
Kategoria: system hi-fi
Model: HIF-3650UMP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Roadstar HIF-3650UMP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi Roadstar

Roadstar

Roadstar MP-425N Instrukcja

23 Września 2024
Roadstar

Roadstar HIF-1990BT Instrukcja

15 Września 2024
Roadstar

Roadstar HIF-3650UMP Instrukcja

14 Września 2024
Roadstar

Roadstar RU-275 Instrukcja

4 Września 2024
Roadstar

Roadstar HIF-1898D+BT Instrukcja

4 Września 2024
Roadstar

Roadstar HIF 8888 TUMP Instrukcja

9 Sierpnia 2024
Roadstar

Roadstar HIF 9931 T Instrukcja

4 Lipca 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI

AKAI EIE Pro Instrukcja

13 Października 2024
Sharp

Sharp XL-540H Instrukcja

11 Października 2024
Kenwood

Kenwood M-9000S Instrukcja

10 Października 2024
GoGen

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024
Morel

Morel SUB-10X Instrukcja

9 Października 2024
Morel

Morel USUB 803 Instrukcja

9 Października 2024
Morel

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024
Morel

Morel Sopran 934 Instrukcja

9 Października 2024
NAD

NAD M10 V3 Instrukcja

9 Października 2024
NUVO

NUVO NV-MPS4-E Instrukcja

8 Października 2024