Instrukcja obsługi Rivacase VA2110


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rivacase VA2110 (15 stron) w kategorii bank mocy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/15
www.rivacase.com
RIVACASE
VA2110
Thank you for purchasing the RIVACASE portable battery.
Read all instructions and warnings carefully before
using the portable battery.RIVACASE
Product package:
RIVACASE portable battery
• User manual
• Micro USB cable
Specications:
Model: VA2110
Battery: Li- Polymer 3.7 V
10000 mAh 37 Wh
Input: Micro USB 5 V 2 A
Type-C 5 V 2 A
Lightning 1.5 A
Output: USB1 5 V 2.1 A
USB2 5 V 2.1 A
Size: 138 x 72 x 15 mm
Safety protection
Over charge | Over discharge | Short circuit protection | Over current | Over Voltage
Operating instructions
Charge the external battery fully before the rst use. Connect the cable to the Micro USB/Type-C/
Lightning input port of the external battery. Connect the other end of the cable to the power
source. You can use PC, AC charger or car charger to charge the battery. We recommend using
RIVAPOWER charger with at least 12W (2.4A) output. Average full charging time is 5-6 hours.
The LED indicator shows the charge level during the charging of the RIVAPOWER battery.
After RIVAPOWER battery is fully charged, 4 LED indicator lights are constantly on. Disconnect
the cable from the battery when charging is complete.To charge the mobile device, connect it
to the output port (Port 1 and/or 2) of the RIVAPOWER battery using the cable. Charging will
start automatically, and the indicator will show the remaining charge of RIVAPOWER battery.
Disconnect the cable from the battery when charging is complete.
Pass through charging
This function allows connecting simultaneously the external battery to the power socket and
mobile devices to the battery. In this case mobile devices and external battery are charging
simultaneously.
We do not recommend keeping RIVAPOWER battery discharged, as it might be damaged. Press
the button to check the battery charge.
EN
Power LevelLED status
0%-2 5%
Lightning Input
Check Button
with
LED Indicator
Micro USB
Input
Type-C Input
USB 1 USB 2
Vielen Dank, dass Sie sich r den tragbaren Akku entschiedenRIVACASE
haben. Lesen Sie alle Anweisungen und Warnungen sorgfältig durch,
bevor Sie den tragbaren Akku verwenden.RIVACASE
Produktpaket:
tragbarer BatterieRIVACASE
• Benutzeranleitung
• Micro-USB Kabel
Leistungsbeschreibung:
Modell: VA2110
Batterie: Li- Polymer 3,7 V
10000 mAh 37 Wh
Eingabe: Micro USB 5 V 2 A
Type-C 5 V 2 A
Lightning 1.5 A
Ausgabe:
USB1 5 V 2,1 A
USB2 5 V 2.1 A
Messung
: 138 x 72 x 15 mm
Sicherheitsanweisungen
Überladung | Unterladung | Kurzschlussschutz | Überstrom | Überspannung
Betriebsanleitung
Vor dem ersten Gebrauch laden Sie die externe Batterie voll auf. Schließen Sie das Kabel an
den Micro USB /Type-C/Lightning-Eingang der externen Batterie an. Das andere Kabelende
schließen Sie an die Stromquelle an. Zum Auaden kann ein Computer, ein Netzladegerät oder
ein Auto Ladegerät verwendet werden. Wir empfehlen das RIVAPOWER-Ladegerät mit der
Ausgangsleistung mindestens 12W (2,4A) zu verwenden. Die geschätzte Gesamtladezeit beträgt
5-6 Stunden.
Während des Ladevorgangs von RIVAPOWER wird der Ladestatus angezeigt. Die vier Anzeigen
leuchten nach dem vollständigen Auaden von RIVAPOWER dauernd. Wenn der Ladevorgang zu
Ende ist, schalten Sie das Kabel von der Batterie ab.Zum Auaden eines Mobilgerätes schließen
Sie es an den Ausgang von RIVAPOWER (Ausgang 1 und/oder 2) mit dem Kabel an. Das andere
Kabelende schließen Sie ans Mobilgerät an. Der Ladevorgang beginnt automatisch, der
Restladestatus der externen Batterie RIVAPOWER wird angezeigt. Wenn der Ladevorgang zu Ende
ist, schalten Sie das Kabel von der Batterie ab.
Die Durchladefunktion ermöglicht, die externe Batterie ans Netz und Mobilgeräte an die
Batterie gleichzeitig anzuschließen. In diesem Fall werden gleichzeitig die Mobilgeräte und die
externe Batterie aufgeladen.
Es wird nicht empfohlen, die externe Batterie leer zu halten. Das kann zur Beschädigung der
Batterie hren. Um den Ladestatus zu sehen, drücken sie die Taste.
DE
Power LevelLED status
0%-2 5%
Lightning Input
Check Button
with
LED Indicator
Micro USB
Input
Type-C Input
USB 1 USB 2


Specyfikacje produktu

Marka: Rivacase
Kategoria: bank mocy
Model: VA2110

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rivacase VA2110, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje bank mocy Rivacase

Instrukcje bank mocy

Najnowsze instrukcje dla bank mocy