Instrukcja obsługi RIKON 50-114
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RIKON 50-114 (24 stron) w kategorii Sander. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/24
4 x 36 Belt / 8 Disc Sander” ” ”
50-114
www.rikontools.com
50-114M1
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
The serial number can be found on the specication label on the rear of your machine.
Serial Number: ___________________________ Date of purchase: _________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
TABLE OF CONTENTS
Safety Instructions...............................................................3-7
Specifications...................................................................7
Electrical Safety.....................................................5,6,18
Carton Contents...............................................................8
Machine Overview.............................................................................9
Assembly ..................................................................10-11
Adjustments .................................................................. 12
Operation..................................................................13-15
Maintenance...........................................................15-17
Wire Diagram ............................................................18
Accessories ............................................................................18
Troubleshooting..................................................................19
Parts Diagram..................................................................20
Parts List............................................................................21,22
Warranty.............................................................................23
Page 2
NOTE: The specications, photographs, drawings and information in this manual represent the
current machine model when the manual was prepared. Changes and improvements may be made
at any time, with no obligation on the part of Rikon Power Tools to modify previously delivered
units. Reasonable care has been taken to ensure that the information in this manual is correct, to
provide you with the guidelines for the proper safety, assembly and operation of this machine.
PAGESECTION
SAVE THESE INSTRUCTIONS.
Refer to them often.
This owner’s manual is not a teaching aid and is intended to show
assembly, adjustments, and general use.
CALIFORNIA PROPOSITION 65 WARNING: Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities contains chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm. Your risk from
exposure to these chemicals varies, depending on how often you do this type of work. To
reduce your exposure, work in a well-ventilated area and with approved safety equipment,
such as dust masks that are specially designed to lter out microscopic particles.
For more detailed information about California Proposition 65 log onto rikontools.com.
SAFETY INSTRUCTIONS
Page 3
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The
following instructions must be followed at all times. Failure to follow all instructions listed below may
result in electric shock, re, and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that this tool
not be modied and/or used for any other application other than that for which it was designed. If you
have any questions about its application, do not use the tool until you have
contacted us and we have advised you.
SAFETY SYMBOLS
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This
symbol may be used in conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in
minor or moderate injury.
Shown without Safety Alert Symbol indicates a situation that may result in property NOTICE:
damage.
GENERAL SAFETY
KNOW YOUR POWER TOOL. Read the owner’s
manual carefully. Learn the tool’s applications, work
capabilities, and its specic potential hazards.
BEFORE USING SANDER
To avoid serious injury and damage to the tool,
read and follow all of the Safety and Operating
Instructions before operating the Bench Sander.
1. Some dust created by using power tools contain
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and
other masonry products.
• Arsenic and chromium from
chemically treated lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area and work with approved safety
equipment, such as those dust masks that are
specially designed to lter out microscopic particles.
2. the entire Owner’s Manual. READ LEARN
how to use the tool for its intended applications.
3. If the tool is GROUND ALL TOOLS.
supplied with a 3-prong plug, it must be plugged
into a 3-contact electrical receptacle. The 3rd
prong is used to ground the tool and provide
protection against accidental electric shock.
DO NOT remove the 3rd prong. See Grounding
Instructions on pages 5 and 6.
4. AVOID A DANGEROUS WORKING
ENVIRONMENT. DO NOT use electrical tools in
a damp environment or expose them to rain.
5. use electrical tools in the presence DO NOT
of ammable liquids or gasses.
6. keep the work area clean, well lit, ALWAYS
and organized. work in an environment DO NOT
with oor surfaces that are slippery from debris,
grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY.
DO NOT permit people to be in the immediate
work area, especially when the electrical tool is
operating.
Specyfikacje produktu
| Marka: | RIKON |
| Kategoria: | Sander |
| Model: | 50-114 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z RIKON 50-114, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sander RIKON
7 Października 2024
2 Października 2024
25 Września 2024
25 Września 2024
22 Września 2024
Instrukcje Sander
- Sander AEG
- Sander Worx
- Sander Milwaukee
- Sander Bosch
- Sander Parkside
- Sander Global
- Sander Toolcraft
- Sander Festool
- Sander Bavaria By Einhell
- Sander Stanley
- Sander Black & Decker
- Sander Scheppach
- Sander Proxxon
- Sander Ribimex
- Sander Hazet
- Sander DeWalt
- Sander Einhell
- Sander Hyundai
- Sander Silverline
- Sander Makita
- Sander Ozito
- Sander RYOBI
- Sander Flex
- Sander DEDRA
- Sander Biltema
- Sander Hilti
- Sander Trotec
- Sander Dremel
- Sander Handwerk
- Sander Meec Tools
- Sander Güde
- Sander Arendo
- Sander Bavaria
- Sander Gastroback
- Sander DURO PRO
- Sander McKenzie
- Sander Westfalia
- Sander Ergotools Pattfield
- Sander Fein
- Sander Ferm
- Sander Hitachi
- Sander Herkules
- Sander Craftsman
- Sander Matrix
- Sander Fieldmann
- Sander Ridgid
- Sander PowerPlus
- Sander Alpha Tools
- Sander Vonroc
- Sander HiKOKI
- Sander Workzone
- Sander Porter-Cable
- Sander Metabo
- Sander Skil
- Sander Kinzo
- Sander Far Tools
- Sander Tryton
- Sander Tacklife
- Sander Maktec
- Sander Bort
- Sander Power Craft
- Sander Topcraft
- Sander Gamma
- Sander Duro
- Sander Varo
- Sander Max
- Sander Truper
- Sander Bruder Mannesmann
- Sander Meister Craft
- Sander Rupes
- Sander Batavia
- Sander Protool
- Sander Holzmann
- Sander Black Decker
- Sander Stomer
- Sander Elu
- Sander King Craft
- Sander Powertec
- Sander Toolson
- Sander Toledo
- Sander FIXIT
- Sander Einhell Bavaria
- Sander THUN
- Sander Pevec
- Sander TAURUS Titanium
- Sander Stalco
Najnowsze instrukcje dla Sander
14 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024