Instrukcja obsługi RIKON 34-255
RIKON
Nie skategoryzowane
34-255
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RIKON 34-255 (20 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/20
www.rikontools.com
34-255M3
Benchtop Mortising Machine
with Table Extensions
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
2
TABLE OF CONTENTS
SPECIFICATIONS
NOTE: The specications, photographs, drawings and information in this manual represent the current model
when the manual was prepared. Changes and improvements may be made at any time, with no obligation on
the part of Rikon Power Tools, Inc. to modify previously delivered units. Reasonable care has been taken to
ensure that the information in this manual is correct, to provide you with the guidelines for the proper safety,
assembly and operation of this machine.
Motor ................................................................................................1/2 HP, TEFC
Motor Speed (no load).......................................................................... 1,700 RPM
Volts ..............................................................................................................120 V
Amps, Hertz ....................................................................................... 3.6 A, 60 Hz
Chuck Capacity ..........................................................................1/2” (1.5 - 13 mm)
Chuck Type .................................................................................................. Keyed
Chisel Shank Diameter ........................................... 1” ( with 3/4” & 5/8” bushings)
Chisel Range .........................................................................................1/4” to 5/8”
Chisel Stroke ................................................................................................ 5-3/4”
Hold Down Length (from Fence) ........................................................................ 3”
Maximum Hold Down Stock Height .................................................................... 5”
Roller Clamps Diameter (2) .......................................................................... 2-1/2”
Max. Stock Width (Fence to Roller Clamps) ................................................ 8-1/2”
Table Size (Width x Depth) ......................................................... 10-3/4” x 12-1/2”
Side Extension Size (2) (Width x Depth)...................................... 1-1/4” x 6-13/16”
Table Width with Extensions ...................................................................... 26-5/8”
Fence Size (Height x Length) ..................................................... 2-5/8 “ x 13-3/4”
Max. Overall Size (W x D x H) ........................................... 27-3/8” x 22” x 30-3/4”
Base Size (Width x Depth) .......................................................... 13-3/4” x 17-3/4”
Net Weight ................................................................................................... 84 lbs
Specications.....................................................................................................................2
Safety Instructions ........................................................................................................3 - 6
Getting To Know Your Machine ............................................................................................. 7
Contents of Package .....................................................................................................7 - 8
Assembly .................................................................................................................... 8 - 11
Operation ..................................................................................................................12 - 14
Maintenance ....................................................................................................................14
Troubleshooting ......................................................................................................... 15
Electricals & Wiring Diagram ....................................................................................... 5 & 15
Parts Diagram ......................................................................................................... 16
Parts List .......................................................................................................... 17
Accessories ..........................................................................................................18
Notes ...............................................................................................................................18
Warranty ..........................................................................................................................19
3
SAFETY SYMBOLS
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following
instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock,
re, and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied
and/or used for any other application other than that for which it was designed. If you have any questions about its
application, do not use the tool until you have contacted us and we have advised you.
SAFETY INSTRUCTIONS
GENERAL SAFETY
KNOW YOUR POWER TOOL. Read the owner’s manual
carefully. Learn the tool’s applications, work capabilities,
and its specic potential hazards.
BEFORE USING YOUR MACHINE
To avoid serious injury and damage to the tool, read and
follow all of the Safety and Operating Instructions before
operating the machine.
1. Some dust created by using power tools contains
chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other
• masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area and work
with approved safety equipment, such as those dust masks
that are specially designed to lter out microscopic
particles.
2. the entire Owner’s Manual. how to use READ LEARN
the tool for its intended applications.
3. If the tool is supplied with a 3 GROUND ALL TOOLS.
prong plug, it must be plugged into a 3-contact electrical
receptacle. The 3rd prong is used to ground the tool and
provide protection against accidental electric shock. DO
NOT remove the 3rd prong. See Grounding Instructions
on the following pages.
4. AVOID A DANGEROUS WORKING ENVIRONMENT.
DO NOT use electrical tools in a damp environment or
expose them to rain.
5. use electrical tools in the presence of DO NOT
ammable liquids or gasses.
6. ALWAYS keep the work area clean, well lit, and
organized. work in an environment with oor DO NOT
surfaces that are slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area,
especially when the electrical tool is operating.
8. to perform an operation DO NOT FORCE THE TOOL
for which it was not designed. It will do a safer and
higher quality job by only performing operations for
which the tool was intended.
9. wear loose WEAR PROPER CLOTHING. DO NOT
clothing, gloves, neckties, or jewelry. These items can
get caught in the machine during operations and pull the
operator into the moving parts. The user must wear a
protective cover on their hair, if the hair is long, to
prevent it from contacting any moving parts.
10. CHILDPROOF THE WORKSHOP AREA by
removing switch keys, unplugging tools from the
electrical receptacles, and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM THE
ELECTRICAL RECEPTACLE when making adjust-
ments, changing parts or performing any maintenance.
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used
in conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious
injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in minor or
moderate injury.
NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.
Specyfikacje produktu
| Marka: | RIKON |
| Kategoria: | Nie skategoryzowane |
| Model: | 34-255 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z RIKON 34-255, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Nie skategoryzowane RIKON
10 Marca 2025
Instrukcje Nie skategoryzowane
- Nie skategoryzowane Ikea
- Nie skategoryzowane Samsung
- Nie skategoryzowane AEG
- Nie skategoryzowane Beko
- Nie skategoryzowane LG
- Nie skategoryzowane Gaggia
- Nie skategoryzowane Honda
- Nie skategoryzowane Philips
- Nie skategoryzowane Parkside
- Nie skategoryzowane Whirlpool
- Nie skategoryzowane Easy Home
- Nie skategoryzowane Hisense
- Nie skategoryzowane StarTech.com
- Nie skategoryzowane Crestron
- Nie skategoryzowane Black & Decker
- Nie skategoryzowane Hazet
- Nie skategoryzowane Conair
- Nie skategoryzowane Blaupunkt
- Nie skategoryzowane IOptron
- Nie skategoryzowane Iiyama
- Nie skategoryzowane Lincoln Electric
- Nie skategoryzowane Metra
- Nie skategoryzowane Manhattan
- Nie skategoryzowane Microchip
- Nie skategoryzowane Heritage Audio
- Nie skategoryzowane Shure
- Nie skategoryzowane Shimano
- Nie skategoryzowane Icy Box
- Nie skategoryzowane Alpine
- Nie skategoryzowane Polaris
- Nie skategoryzowane IFM
- Nie skategoryzowane Biltema
- Nie skategoryzowane Digitus
- Nie skategoryzowane Vimar
- Nie skategoryzowane Emos
- Nie skategoryzowane AVMATRIX
- Nie skategoryzowane Morphy Richards
- Nie skategoryzowane La Crosse Technology
- Nie skategoryzowane Victron Energy
- Nie skategoryzowane Pyle
- Nie skategoryzowane Texas
- Nie skategoryzowane Panduit
- Nie skategoryzowane CRUX
- Nie skategoryzowane KitchenAid
- Nie skategoryzowane Esoteric
- Nie skategoryzowane Speco Technologies
- Nie skategoryzowane Fluke
- Nie skategoryzowane Bogen
- Nie skategoryzowane Pulsar
- Nie skategoryzowane Exquisit
- Nie skategoryzowane Chief
- Nie skategoryzowane Arçelik
- Nie skategoryzowane AirLive
- Nie skategoryzowane Audio-Technica
- Nie skategoryzowane Planet
- Nie skategoryzowane Rocktrail
- Nie skategoryzowane Konica Minolta
- Nie skategoryzowane Ariete
- Nie skategoryzowane LiftMaster
- Nie skategoryzowane Taga Harmony
- Nie skategoryzowane Argoclima
- Nie skategoryzowane Livarno Lux
- Nie skategoryzowane Marmitek
- Nie skategoryzowane Smart-AVI
- Nie skategoryzowane Schwaiger
- Nie skategoryzowane Mean Well
- Nie skategoryzowane Kenmore
- Nie skategoryzowane Deaf Bonce
- Nie skategoryzowane Sangean
- Nie skategoryzowane Playtive
- Nie skategoryzowane ZKTeco
- Nie skategoryzowane Nebula
- Nie skategoryzowane Hitachi
- Nie skategoryzowane CyberPower
- Nie skategoryzowane Fieldmann
- Nie skategoryzowane Soundskins
- Nie skategoryzowane Vivanco
- Nie skategoryzowane Leifheit
- Nie skategoryzowane Kanto
- Nie skategoryzowane Lumens
- Nie skategoryzowane HQ Power
- Nie skategoryzowane Vicoustic
- Nie skategoryzowane SureFire
- Nie skategoryzowane Savio
- Nie skategoryzowane RADEMACHER
- Nie skategoryzowane Crosley
- Nie skategoryzowane Proscan
- Nie skategoryzowane Simplified MFG
- Nie skategoryzowane Musway
- Nie skategoryzowane Livarno
- Nie skategoryzowane Melinera
- Nie skategoryzowane GeoVision
- Nie skategoryzowane Vizio
- Nie skategoryzowane DoorBird
- Nie skategoryzowane Genelec
- Nie skategoryzowane Expobar
- Nie skategoryzowane PAC
- Nie skategoryzowane Keter
- Nie skategoryzowane Berker
- Nie skategoryzowane Atdec
- Nie skategoryzowane Wise
- Nie skategoryzowane MuxLab
- Nie skategoryzowane Extron
- Nie skategoryzowane Morningstar
- Nie skategoryzowane Brinno
- Nie skategoryzowane Legrand
- Nie skategoryzowane NovaStar
- Nie skategoryzowane Parasound
- Nie skategoryzowane DB Technologies
- Nie skategoryzowane Berkel
- Nie skategoryzowane Phoenix Contact
- Nie skategoryzowane Fluance
- Nie skategoryzowane On-Q
- Nie skategoryzowane Planet Audio
- Nie skategoryzowane Hedbox
- Nie skategoryzowane IPEGA
- Nie skategoryzowane Royal Catering
- Nie skategoryzowane Rexing
- Nie skategoryzowane IDIS
- Nie skategoryzowane I-PRO
- Nie skategoryzowane Ruggard
- Nie skategoryzowane BlaknBlu
- Nie skategoryzowane Louroe Electronics
- Nie skategoryzowane MOOOV
- Nie skategoryzowane Crem
- Nie skategoryzowane Zeapon
- Nie skategoryzowane CLIMAQUA
- Nie skategoryzowane Tece
- Nie skategoryzowane Sportime
- Nie skategoryzowane Quasar Science
- Nie skategoryzowane Beltronics
Najnowsze instrukcje dla Nie skategoryzowane
14 Marca 2025
14 Marca 2025
14 Marca 2025
14 Marca 2025
14 Marca 2025
14 Marca 2025
14 Marca 2025
14 Marca 2025
14 Marca 2025
14 Marca 2025