Instrukcja obsługi RIKON 23-400H
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RIKON 23-400H (28 stron) w kategorii strugarka. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/28
www.rikontools.com
23-400HM2
16” Thickness Planer
with Helical Cutterhead
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
4001824
23-400H
2
TABLE OF CONTENTS
SPECIFICATIONS
NOTE: The specications, photographs, drawings and information in this manual represent the current
model when the manual was prepared. Changes and improvements may be made at any time, with no
obligation on the part of Rikon Power Tools, Inc. to modify previously delivered units. Reasonable care
has been taken to ensure that the information in this manual is correct, to provide you with the guidelines
for the proper safety, assembly and operation of this machine.
This owner’s manual is not a teaching aid and is intended to show
assembly, adjustments, and general use.
Motor ....................................................................................................3 HP, TEFC
Motor Speed (no load).......................................................................... 3,400 RPM
Volts ............................................................................................................. 220 V
Amps, Hertz .........................................................................................12 A, 60 Hz
Cutterhead Diameter .................................................................... 2-3/4" (70 mm)
Cutterhead Speed (RPM / CPM)....................................5,100 RPM / 20,400 CPM
Number of Carbide Inserts, 4-sided.................................................................... 72
Maximum Depth of Cut ....................................................................... 1/8" (3 mm)
Maximum Cutting Width ....................................................................16" (406 mm)
Maximum Cutting Depth (Height) ............................................ 8-13/16” (225 mm)
Feed Speed SF/min ........................................................ 16 to 23 (5 to 7 SM/min)
Dust Port ...................................................................... 4-3/4” Diameter (120 mm)
Dust Collection Minimum CFM ........................................................................ 650
Noise Level (no load) .................................................................................. ≤85dB
Overall Size (LxWxH)...................55” x 24-1/4” x 42-1/2” (1400 x 616 x 1080 mm)
Base Size ...........................................................24-5/8” x 22-1/4” (627 x 565 mm)
Net Weight ....................................................................................375 lbs (170 kg)
Specifications.....................................................................................................................2
Safety Instructions ........................................................................................................3 - 6
Getting To Know Your Machine .........................................................................................7
Contents of Package ....................................................................................................7 - 8
Assembly .....................................................................................................................8 - 9
Operation ...................................................................................................................10 - 11
Adjustments ...............................................................................................................12 - 16
Maintenance ....................................................................................................................17
Wiring Diagram ................................................................................................................17
Troubleshooting ............................................................................................................18
Parts Diagrams & Parts Lists .................................................................................. 19 - 25
Warranty ..........................................................................................................................26
Accessories ................................................................................................................ 27
Notes ...............................................................................................................................27
3
SAFETY SYMBOLS
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following
instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock,
re, and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied
and/or used for any other application other than that for which it was designed. If you have any questions about its
application, do not use the tool until you have contacted us and we have advised you.
SAFETY INSTRUCTIONS
GENERAL SAFETY
KNOW YOUR POWER TOOL. Read the owner’s manual
carefully. Learn the tool’s applications, work capabilities,
and its specic potential hazards.
BEFORE USING YOUR MACHINE
To avoid serious injury and damage to the tool, read and
follow all of the Safety and Operating Instructions before
operating the machine.
1. Some dust created by using power tools contains
chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other
• masonry products.
• Arsenic and chromium from
chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area and work
with approved safety equipment, such as those dust masks
that are specially designed to lter out microscopic
particles.
2. the entire Owner’s Manual. how to use READ LEARN
the tool for its intended applications.
3. If the tool is supplied with a 3 GROUND ALL TOOLS.
prong plug, it must be plugged into a 3-contact electrical
receptacle. The 3rd prong is used to ground the tool and
provide protection against accidental electric shock. DO
NOT remove the 3rd prong. See Grounding Instructions
on the following pages.
4. AVOID A DANGEROUS WORKING ENVIRONMENT.
DO NOT use electrical tools in a damp environment or
expose them to rain.
5. use electrical tools in the presence of DO NOT
ammable liquids or gasses.
6. ALWAYS keep the work area clean, well lit, and
organized. work in an environment with oor DO NOT
surfaces that are slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area,
especially when the electrical tool is operating.
8. to perform an operation DO NOT FORCE THE TOOL
for which it was not designed. It will do a safer and
higher quality job by only performing operations for
which the tool was intended.
9. wear loose WEAR PROPER CLOTHING. DO NOT
clothing, gloves, neckties, or jewelry. These items can
get caught in the machine during operations and pull the
operator into the moving parts. The user must wear a
protective cover on their hair, if the hair is long, to
prevent it from contacting any moving parts.
10. CHILDPROOF THE WORKSHOP AREA by
removing switch keys, unplugging tools from the
electrical receptacles, and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM THE
ELECTRICAL RECEPTACLE when making adjust-
ments, changing parts or performing any maintenance.
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used
in conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious
injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in minor or
moderate injury.
NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.
Specyfikacje produktu
| Marka: | RIKON |
| Kategoria: | strugarka |
| Model: | 23-400H |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z RIKON 23-400H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje strugarka RIKON
2 Października 2024
2 Października 2024
2 Października 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
Instrukcje strugarka
- strugarka AEG
- strugarka Worx
- strugarka Stihl
- strugarka Bosch
- strugarka Parkside
- strugarka Global
- strugarka Bavaria By Einhell
- strugarka Black & Decker
- strugarka Proxxon
- strugarka Taurus
- strugarka DeWalt
- strugarka Einhell
- strugarka Makita
- strugarka Ozito
- strugarka RYOBI
- strugarka Max Bahr
- strugarka Meec Tools
- strugarka Güde
- strugarka Bavaria
- strugarka McKenzie
- strugarka Ergotools Pattfield
- strugarka Ferm
- strugarka Herkules
- strugarka Fieldmann
- strugarka PowerPlus
- strugarka Alpha Tools
- strugarka XU1
- strugarka HiKOKI
- strugarka Proviel
- strugarka Metabo
- strugarka Cotech
- strugarka Skil
- strugarka Snow Joe
- strugarka Bort
- strugarka Topcraft
- strugarka Gamma
- strugarka Varo
- strugarka Rupes
- strugarka Protool
- strugarka Black Decker
- strugarka Stomer
- strugarka Triton
- strugarka Surtek
- strugarka Felisatti
- strugarka Robust
- strugarka Einhell Bavaria
- strugarka Prowork
Najnowsze instrukcje dla strugarka
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
6 Października 2024