Instrukcja obsługi Rigol DG1062Z

Rigol generator DG1062Z

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rigol DG1062Z (36 stron) w kategorii generator. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/36
RIGOL
Quick Guide
DG1000Z Series
Function/Arbitrary Waveform Generator
May 2013
RIGOL Technologies nc., I
RIGOL
DG1000Z Quick Guide I
Guaranty and Declaration
Copyright
© 2013 RIGOL Technologies, Inc. All Rights Reserved.
Trademark Information
RIGOL is a registered trademark of RIGOL Technologies, Inc.
Publication Number
QGB09101-1110
Notices
RIGOL products are protected by patent law in and outside of P.R.C.
RIGOL reserves the right to modify or change parts of or all the specifications and
pricing policies at company’s sole decision.
Information in this publication replaces all previously corresponding material.
RIGOL shall not be liable for losses caused by either incidental or consequential in
connection with the furnishing, use or performance of this manual as well as any
information contained.
Any part of this document is forbidden to be copied or photocopied or rearranged
without prior written approval of RIGOL.
Product Certification
RIGOL guarantees this product conforms to the national and industrial standards in
China as well as the ISO9001:2008 standard and the ISO14001:2004 standard. Other
international standard conformance certification is in progress.
Contact Us
If you have any problem or requirement when using our products, please contact RIGOL
Technologies, Inc. or your local distributors, or visit: www.rigol.com.
RIGOL
II DG1000Z Quick Guide
Safety Requirement
General Safety Summary
Please review the following safety precautions carefully before putting the instrument
into operation so as to avoid any personal injuries or damages to the instrument and any
product connected to it. To prevent potential hazards, please use the instrument only
specified by this manual.
Use Proper Power Cord.
Only the power cord designed for the instrument and authorized by local country could
be used.
Ground The Instrument.
The instrument is grounded through the Protective Earth lead of the power cord. To avoid
electric shock, it is essential to connect the earth terminal of power cord to the Protective
Earth terminal before any inputs or outputs.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markers on the instrument and
check your manual for more information about ratings before connecting.
Use Proper Overvoltage Protection.
Make sure that no overvoltage (such as that caused by a thunderstorm) can reach the
product, or else the operator might expose to danger of electrical shock.
Do Not Operate Without Covers.
Do not operate the instrument with covers or panels removed.
Avoid Circuit or Wire Exposure.
Do not touch exposed junctions and components when the unit is powered.
Do Not Operate With Suspected Failures.
If you suspect damage occurs to the instrument, have it inspected by qualified service
personnel before further operations. Any maintenance, adjustment or replacement
especially to circuits or accessories must be performed by RIGOL authorized personnel.
Keep Well Ventilation.
Inadequate ventilation may cause increasing of temperature or damages to the device.
So please keep well ventilated and inspect the intake and fan regularly.
Do Not Operate in Wet Conditions.
In order to avoid short circuiting to the interior of the device or electric shock, please do
not operate in a humid environment.


Specyfikacje produktu

Marka: Rigol
Kategoria: generator
Model: DG1062Z

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rigol DG1062Z, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje generator Rigol

Rigol

Rigol DSG836A Instrukcja

29 Września 2024
Rigol

Rigol DSG821 Instrukcja

22 Września 2024
Rigol

Rigol DG1062Z Instrukcja

21 Września 2024

Instrukcje generator

Najnowsze instrukcje dla generator

Generac

Generac QT03624KNAX Instrukcja

14 Października 2024
Ferm

Ferm PGM1006 Instrukcja

13 Października 2024
AL-KO

AL-KO 3500-C Instrukcja

12 Października 2024
Fuxtec

Fuxtec FX-IG13 Instrukcja

12 Października 2024
DeWalt

DeWalt DXGNR4000 Instrukcja

10 Października 2024
ThermaSol

ThermaSol TFXA-390 Instrukcja

9 Października 2024
ThermaSol

ThermaSol TFXM-390 Instrukcja

9 Października 2024
DeWalt

DeWalt DXGN4500 Instrukcja

9 Października 2024
DeWalt

DeWalt DXGN7200 Instrukcja

9 Października 2024
Einhell

Einhell BT-PG 2000/2 Instrukcja

9 Października 2024