Instrukcja obsługi RGBlink MSP 200

RGBlink Niesklasyfikowane MSP 200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RGBlink MSP 200 (37 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/37
MSP 200 User Manual 1
MSP 200
User Manual
Manual # RGB- - -M200 E : RD UM 001
Revision: V1.0
MSP 200 User Manual 2
M ·User ManualSP 200
Thank you for choosing our products!
In order to allow you to learn how to use the MSP 200 quickly, we bring you
the detailed user Manual. You can read the introduction and directions
before using the MSP 200, please read all the information we provide
carefully to use our products correctly.
Copyright
©2015 All rights are reserved by RGBLINK.
This document is done independently by Xiamen RGBlink Science &
Technology Co.,LTD. No part can be copied, reproduced or translated
without permission.
Notice
RGBlink provides this manual ―as is‖ without warranty of any kind, no
matter expressed or implied, including but not limited to the implied
warranties or merchantability and fitness for a particular purpose. RGBlink
may make improvements or changes to the products and the programs
described in this publication at any time without notice.
This publication would contain technical inaccuracies or typographical
errors. Changes are periodically made to the information in this publication;
these changes are incorporated in new editions of this publication.
Federal Communications Commission
(FCC) Statement
This equipment has been tested and found to comply with the limits for a
class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses and radiates radio frequency energy and, if not
installed or used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area may cause harmful interference, in which case the
user will be responsible for correcting any interference.
Guarantee and Compensation
MSP 200 User Manual 3
RGBlink provides a guarantee related to perfect manufacturing as part
of the legally stipulated terms of guarantee. On receipt, the purchaser
must immediately inspect all delivered goods for damage incurred
during transportation, as well as for material and manufacturing faults.
Please complain to RGBlink by written notice.
The period of guarantee begins from the date of transfer of risks, in the
case of special systems and software on the date of commissioning, at
latest 30 days after the transfer of risks. In the event of justified notice of
compliant, RGBlink can repair the fault or provide a replacement at its own
discretion within an appropriate period. If this measure proves to be
impossible or unsuccessful, the purchaser can demand a reduction in the
purchase price or cancellation of the contract. All other claims, in particular
those relating to compensation for direct or indirect damage, and also
damage attributed to the operation of software as well as to other service
provided by RGBlink, being a component of the system or independent
service, will be deemed invalid provided the damage is not proven to be
attributed to the absence of properties guaranteed in writing or due to the
intent or gross negligence or part of RGBlink.
If the purchaser or a third party carries out modifications or repairs on
goods delivered by RGBlink, or if the goods are handled incorrectly, in
particular if the systems are commissioned operated incorrectly or if, after
the transfer of risks, the goods are subject to influences not agreed upon in
the contract, all guarantee claims of the purchaser will be rendered invalid.
Not included in the guarantee coverage are system failures which are
attributed to programs or special electronic circuitry provided by the
purchaser, e.g. interfaces. Normal wear as well as normal maintenance are
not subject to the guarantee provided by RGBlink either.
The environmental conditions as well as the servicing and maintenance
regulations specified in this manual must be complied with the customer.
Trademark
Brand and product names mentioned in this manual may be trademarks,
registered trademarks or copyrights of their respective holders. All brand
and product names mentioned in this manual serve as comments or
examples and are not to be understood as advertising for the products or
their manufactures.

Specyfikacje produktu

Marka: RGBlink
Kategoria: Niesklasyfikowane
Model: MSP 200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RGBlink MSP 200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane RGBlink

RGBlink

RGBlink MSP305 Instrukcja

9 Października 2024
RGBlink

RGBlink TAO 1tiny Instrukcja

9 Października 2024
RGBlink

RGBlink C1US II Instrukcja

29 Września 2024
RGBlink

RGBlink MSP 200 Instrukcja

29 Września 2024
RGBlink

RGBlink CP 3072S Instrukcja

29 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024