Instrukcja obsługi Renault Kwid (2016)
Renault
Automatyczny
Kwid (2016)
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Renault Kwid (2016) (130 stron) w kategorii Automatyczny. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/130
0.1
The descriptions of the models given in this manual are based on the technical specifications at the time of writing. This manual
covers all items of equipment (both standard and optional) available for these models, but whether or not these are fitted
to the vehicle depends on the version, options selected and the country where the vehicle is sold.
This manual may also contain information about items of equipment to be introduced later in the model year.
Throughout the manual, the “approved dealer” is your RENAULT dealer.
Welcome aboard your vehicle
This Owner’s Manual contains the information necessary:
– for you to familiarise yourself with your vehicle, to use it to its best advantage and to benefit fully from the all the functions and
the technical developments it incorporates.
– to ensure that it always gives the best performance by following the simple, but comprehensive advice concerning regular main-
tenance.
– to enable you to deal quickly with minor faults not requiring specialist attention.
It is well worth taking a few minutes to read this manual to familiarise yourself with the information and guidelines it contains about
the vehicle and its functions and new features. If certain points are still unclear, our Network technicians will be only too pleased
to provide you with any additional information.
The following symbol will help you when reading this manual:
Translated from English. Copying or translation, in part or in full, is forbidden unless prior written permission has been obtained from the vehicle manufac-
turer.
To indicate a hazard, danger or safety recommendation.
Enjoy driving your new vehicle.
0.2
0.3
Getting to know your vehicle ...............................
Driving ...................................................................
Your comfort .........................................................
Maintenance .........................................................
Practical advice ....................................................
Technical specifications ......................................
Alphabetical index .............................................
Radio .....................................................................
Sections
1
C O N T E N T S
2
3
4
5
6
7
8
0.4
1.1
Section 1: Getting to know your vehicle
Keys, radio frequency remote control: general information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2
Locking and unlocking the doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4
Opening and closing the doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5
Engine Immobiliser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8
Front seats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9
Seat belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8
Safety systems in addition to the seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.12
Child safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.14
Driving Positon - Right Hand Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.21
Warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.23
On-board computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.26
Exterior lighting and signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.28
Headlight height adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.29
Audible and visual signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.30
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.31
Screen washer/wiper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.32
Fuel tank (filling with fuel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.33
1.2
KEYS, RADIO FREQUENCY REMOTE CONTROL: general information(1/2)
Radio frequency remote
control C
3 Locks all doors
4 Unlocks all doors
5 Coded key for ignition switch
Key A
1 Mechanical Key
Key B
2 Coded key for ignition switch.
Driver’s responsibility:
Never leave your vehicle
with the keys inside
when leaving a child (or
animal) in the car, even for a
short period. The reason for this
is that the child may endanger
himself or others by starting the
engine, activating equipment
such as the window winders for
example, or locking the doors.
The key must not be used for any
function other than those described
in the handbook (removing the cap
from a bottle, etc.).
Advice : Avoid leaving the
remote control in hot, cold or
humid areas.
1.3
KEYS, RADIO FREQUENCY REMOTE CONTROL: general information(2/2)
The remote control unit
operating range
This varies according to the
environment. It is therefore important
when handling the remote control to
ensure that you do not lock or unlock
the vehicle by inadvertently pressing
the buttons.
Interference
The presence of certain objects (metal
objects, mobile telephones, or an area
with strong electromagnetic radiation,
etc.) close to the key may create
interference and affect the operation of
the system.
Replacement and additional keys or
remote controls
If you lose your remote control key or
require another, you can obtain one
from an approved dealer.
If a remote control or key is replaced,
it will be necessary to take the vehicle
and all of its remote control keys to
an authorised dealer to reset them.
You may use up to four remote control
keys per vehicle.
1.4
From the inside
Push in button to lock and lift button 2 2
to unlock. It is impossible to open the
door if is pushed in.2
Electric central locking
If equipped, It simultaneously locks or
unlocks the doors.
Lock or unlock the doors by pressing
switch .3
While locking the doors with remote,
indicator lights will blink twice to confirm
the locking. They will blink only once
while unlocking the doors.
LOCKING AND UNLOCKING THE DOORS
Manual control
From the outside
Unlock the driver door using the key in
door lock .1
Driver’s responsibility
Never leave an animal,
child or adult who is not
self-sufficient alone on your
vehicle, even for a short time.They
may pose a risk to themselves or to
others by starting the engine, acti-
vating equipment.
RISK OF DEATH OR SERIOUS
INJURY.
Locking the doors without
the radio frequency remote
control
For example, in the event of a discharged
battery or the radio frequency remote
control temporarily not working.
With engine switched off and
any door o pen , pr ess and
hold the switch for 3more
than five seconds. When the door is
closed, all the doors will be locked.
The vehicle can only be locked from
the outside using the radio frequency
remote control.
1.5
OPENING AND CLOSING THE DOORS(1/2)
Opening the doors from the
outside
With the doors unlocked (refer to the
information on “Locking/unlocking the
doors” in Section 1), place your hand
on the handle and pull towards you.1
Special note
Depending on the vehicle, accessories
(e.g. radio) stop working either when
the engine is switched off or when the
doors are locked.
Opening from the inside
Pull handle .2
As a safety precaution,
the doors should only be
opened or closed when the
vehicle is stationary.
1.6
OPENING AND CLOSING THE DOORS(2/2)
Child safety
If equipped, this feature is to make
it impossible for the rear doors to be
opened from the inside, move lever 3
on each rear door and check from
the inside that the doors are securely
locked.
Driver’s responsibility
when parking or stopping
the vehicle
Never leave an animal, child
or adult who is not self-sufficient
alone on your vehicle, even for a
short time.
They may pose a risk to themselves
or to others by starting the engine,
activating equipment such as the
electric windows or by locking the
doors.
Also, in hot and/or sunny weather,
ple ase rememb er that the
temperature inside the passenger
compartment increases very quickly.
RISK OF DEATH OR SERIOUS
INJURY.
1.7
ENGINE IMMOBILISER
(Depends on vehicle)
Engine Immobiliser prevents the
vehicle being driven by anyone not
in possession of the vehicle’s coded
ignition key.
Operating principle
The vehicle is automatically protected
a few seconds after the ignition is
switched off.
If the vehicle does not recognise the
coded ignition key or wrong key is used,
the engine cannot be started.
System operation
When the ignition is switched on, the
vehicle has recognised the code. You
can then start the engine.
Vehicle protection
The vehicle will only be protected after
the ignition has been switched off.
Any unauthorised work
carried out on the engine
immobiliser (computers,
wiring, etc.) could be dan-
gerous. Work must be carried out by
qualified personnel.
Operating faults
After the ignition has been switched
on, if warning light continues to flash 1
or remains continuously lit, there is a
system operating fault.
In all cases, it is essential to contact an
approved dealer as only they are qual-
ified to repair the engine immobiliser.
If the coded ignition key is faulty,
use the second key (supplied with
the vehicle).
Driver’s responsibility
when parking or stopping
the vehicle
Never leave an animal, child
or adult who is not self-sufficient
alone on your vehicle, even for a
short time.
They may pose a risk to themselves
or to others by starting the engine,
activating equipment such as the
electric windows or by locking the
doors.
Also, in hot and/or sunny weather,
please remember th at the
temperature inside the passenger
compartment increases very quickly.
RISK OF DEATH OR SERIOUS
INJURY.
1
1.8
FRONT SEATS
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
We would advise you not to recline
the seatbacks too far to ensure that
the effectiveness of the seat belts
is not reduced.Nothing should be
placed on the floor (area in front of
driver) as such objects may slide
under the pedal during braking ma-
noeuvres, thus obstructing its use.
Move forward or backward
Lift the lever to release and move the 1
seat forward or backward.Release the
lever in desired position of seat and 1
ensure that the seat is fully locked into
place.
To tilt the seatback
Lift knob upward to unlock recliner 2
mechanism.Tilt the seat back to desired
position and release knob. Ensure seat
back is locked properly after release.
1.9
SEAT BELTS (1/3)
Always wear your seat belt when
travelling in your vehicle. You must
also comply with the legislation of the
particular country you are in.
Incorrectly adjusted or
twisted seat belts may
cause injuries in the event
of an accident.
Use one seat belt per person,
whether child or adult.
Even pregnant women should wear
a seat belt. In this case, ensure that
the lap belt is not exerting too much
pressure on the abdomen, but do
not allow any slack.
Before starting, first adjust your
driving position, then ask all
occupants to adjust their seat belts
to ensure optimum protection.
Adjusting your driving position
(depending on the vehicle)
– Sit well back in your seat (having
removed your coat or jacket etc.).
This is essential to ensure your back
is positioned correctly;
– adjust the distance between the
seat and the pedals. Your seat
should be as far back as possible
while still allowing you to depress
the clutch pedal fully. The seatback
should be adjusted so that your arms
are slightly bent when you hold the
steering wheel.
Adjusting the seat belts
Sit with your back firmly against the
seatback.
The shoulder strap 1 should be as close
as possible to the base of the neck but
not on it.
Lap belt must be worn flat over the 2
thighs and against the pelvis. The seat
belt must be worn as close to the body
as possible. i.e.: avoid wearing heavy
clothing or keeping bulky objects under
the belts, etc.
Make sure that the rear bench seat
is locked in correct position so that
the rear seat belts will operate
efficiently. Refer to the information
on the Seats in Section 1.
– Ensure that no objects are
placed in the area around
the seat belt latch as they
could prevent it from being
properly secured.
– Make sure the seat belt latch is
properly positioned (it should
not be hidden away, crushed or
flattened by people or objects).
1
2
1.10
SEAT BELTS (2/3)
To fasten
Unwind the belt slowly and smoothly
and ensure that buckle locks into 3
latch 5 (check that it is locked by pulling
on buckle ). 3
If the belt jams, allow it to return slightly
before attempting to unwind it again.
If your seat belt is completely jammed,
pull slowly, but firmly, so that just over
3 cm unwinds. Allow it to return slightly
before attempting to unwind it again.
If there is still a problem, contact an
approved dealer.
Unlocking
Press the button on latch and the 4 5
seat belt will be rewound by the inertia
reel. Hold by the buckle to make this
easier.
– No mo di f ic a t i o n
may be made to the
component parts of the
originally fitted restraint
system:seat belts,s eats and
their mountings. For special
operations (e.g. fitting child seats),
contact an authorised dealer.
– Do not use devices which allow
any slack in the belts (e.g.
clothes pegs, clips, etc.): a seat
belt which is worn too loosely
may cause injury in the event of
an accident.
– Never wear the shoulder strap
under your arm or behind your
back.
– Never use the same belt for more
than one person and never hold
a baby or child on your lap with
your seat belt around them.
– The belt should never be twisted.
– Following an accident, have the
seat belts checked and replaced
if necessary. Always replace your
seat belts as soon as they show
any signs of wear.
– Make sure that the buckle is
inserted into the appropriate
latch.
4
1.11
SEAT BELTS (3/3)
Adjusting the rear seat belts
Follow the same intstructions of front
seat belts to adjust/fasten/unolcking the
rear seat belts.
Adjust the seat belt strap as indicated in
the image for height adjustment.
1.12
SAFETY SYSTEMS IN ADDITION TO THE SEAT BELTS (1/2)
Depending on the vehicle, they are
composed of :
– seat belt locking ;
– front airbag for driver .1
These systems are designed to act
independently or together when the
vehicle is subjected to a frontal impact.
Depending on the severity of the
impact, the system can trigger :
– seat belt locking;
– airbag
– Have the entire restraint
system checked following
an accident.
– No operation whatsoever
is permitted on any part of the
system (air bags, electronic con-
trol units, wiring) and the system
components must not be reused
on any other vehicle, even if iden-
tical.
– To avoid premature triggering
of the system which may cause
injury, only qualified Network
personnel are authorised to work
on the methods of restraint in
addition to the front seat belt.
– The electric trigger system may
only be tested by a specially
trained technician using special
equipment.
– When the vehicle is scrapped,
contact an approved dealer for
disposal of the pretensioner and
airbag gas generators.
Warnings concerning the
driver’s air bag
– Do not modify the steering
wheel or the steering wheel
boss.
– Do not cover the steering wheel
boss under any circumstances.
– Do not attach any objects (badge,
logo, clock, telephone holder,
etc.) to the steering wheel boss.
– You must not remove the steering
wheel (such work must only be
performed by trained personnel
from our Network).
– When driving, do not sit too close
to the steering wheel. Sit with
your arms slightly bent (see the
information on “Adjusting your
driving position” in Section 1).
This will allow sufficient space for
the air bag to inflate properly and
be fully effective.
– Always use seat belts for a better
and effective use of the Airbag.
1.13
SAFETY SYSTEMS IN ADDITION TO THE SEAT BELTS (2/2)
Driver’s air bag 1
It is fitted on the driver’s side on the
steering wheel.
The airbag is of best use when it is
used along with the seat belt.
The air bag system uses
pyrotechnic principles. This
explains why, when the air
bag inflates, it will gener-
ate heat, produce smoke (this does
not mean that a fire is about to start)
and make a noise upon detonation.
An air bag may inflate immediately,
causing some minor, superficial
grazing to the skin or other discom-
fort.
Air bag system consists of :
– an airbag and gas generator fitted on
the steering wheel for the driver ;
– an electronic unit for system
monitoring which controls the gas
generator electrical trigger system ;
– a single warning light å ;
– sensors.
Operation
This system is only operational when
the ignition is switched on.
If a severe frontal impact occurs, the
air bag inflates rapidly, cushioning the
impact of the driver’s head and chest
against the steering wheel. The air bag
then deflates immediately so that the
driver is not impeded in any way when
they get out of the vehicle.
1.15
Using a child seat
The level of protection offered by the
child seat depends on ability to restrain
child and on its installation. Incorrect
installation risks the protection of the
child in the event of harsh braking or an
impact.
Before purchasing a child seat, check
that it complies with the regulations
and that it can be fitted in your vehicle.
Consult an approved dealer to find out
which seats are recommended for your
vehicle. Before fitting a child seat, read
the manual and respect its instructions.
If you experience any difficulties during
installation, contact the manufacturer of
the equipment. Keep the instructions
with the seat.
Set a good example by always
fastening your seat belt and
teaching your child:
– to strap themselves in correctly;
– to always get in and out of the
car at the kerb, away from busy
traffic.
Do not use a second-hand child
seat or one without an instruction
manual.
Check that there are no objects in
the vicinity of the child seat which
could impede its operation.
Never leave a child un-
attended in the vehicle.
Check that your child is
always strapped in and that
the belt or safety harness used is
correctly set and adjusted. Avoid
wearing bulky clothing which could
cause the belts to slacken.
Never let your child put their head or
arms out of the window.
Check that the child is in the correct
position for the entire journey,
especially if asleep.
CHILD SAFETY: general information (2/2)
1.16
CHILD SAFETY: fitting a child seat (1/5)
In the front seat
The laws concerning children travelling
in the front passenger seat differ in
every country. Consult the legislation in
force and follow the indications on the
diagram on the following page.
Before fitting a child seat in this seat (if
authorised):
– deactivate the front passenger air
bag;
– lower the seat belt as far as possible;
– move the seat as far back as
possible;
– gently tilt the seatback away from
vertical (approximately 25°);
– on equipped vehicles, raise the seat
base as far as possible.
Do not change these settings after the
child seat is installed.
RIS K OF DEATH OR
SERIOUS INJURY: before
fitting a rear-facing child
seat in this seat, check
that the air bag has been deacti-
vated (refer to the information on
“Deactivating the front passenger
air bags” in Section 1).
Some seats are not suitable for fitting
child seats. The diagram on the
following page shows you how to attach
a child seat.
The types of child seats indicated may
not be available. Before using a different
child seat, check with the manufacturer
that it can be fitted.
Fit the child seat in rear seat
Left Side.
Check that when installing
the child seat in the vehicle
it is not at risk of coming loose from
its base.
If you have to remove the headrest,
check that it is correctly stored so
that it does not come loose under
harsh braking or impact.
Always attach the child seat to the
vehicle even if it is not in use so that
it does not come loose under harsh
braking or impact.
1.17
In the rear side seat
A carrycot can be installed across the
vehicle and will take up at least two
seats. Position the child with his or her
feet nearest the door.
Before fitting a child seat to the ISOFIX
anchorages on the rear side seat,
ensure that the seat belt buckles are
not positioned between the two ISOFIX
anchorages on this seat. If necessary,
move the buckle from the seat in
question towards the centre of the
vehicle.
Move the front seat as far forward as
possible to install a rear-facing child
seat, then move back the seat in front
as far as it will go, although without
allowing it to come into contact with the
child seat.
For the safety of the child in the
forward-facing seat, do not move the
seat in front back past the middle of the
runner, do not tilt the seatback too far
(maximum of 25° ) and raise the seat as
much as possible. Ensure that the child seat
or the child’s feet do not
prevent the front seat from
locking correctly.
Refer to the information on the
“Front seats” in Section 1.
CHILD SAFETY: fitting a child seat (2/5)
1.18
CHILD SAFETY: fitting a child seat (3/5)
RISK OF DEATH OR
SERIOUS INJURY: before
fitting a rear-facing child
seat on the front passenger
seat, check that the airbag has been
deactivated (please refer to the in-
formation on “Child safety: front
passenger airbag deactivation, acti-
vation” in Section 1)
Using a child safety system
which is not approved for
this vehicle will not correctly
protect the baby or child.
They risk serious or even fatal injury.
Child seat attached using the belt
¬ Seat which allows a child seat with
“Universal” approval to be attached by
a seat belt.
² Seat not suitable for fitting child
seats.
Visual installation of the five-seater version
1.19
CHILD SAFETY: fitting a child seat (4/5)
Seating Position
Mass Group Weight of
the child
Front passenger
seat
Rear Outboard Rear
Centre
Intermediate
Board
Intermediate
Centre
LEFT RIGHT
Group 0 Upto 10 kg X U X X X X
Group 0+ Upto 13 kg X U X X X X
Group I 9 to 18 kg X U X X X X
Group II 15 kg to 25 kg X U X X X X
Group III 22 kg to 36 kg X U X X X X
The table below summarises the information already shown in the diagram on the following pages, to ensure the applicable
regulations are respected.
(1) RISK OF DEATH OR SERIOUS INJURY: never fit a child seat on the front seat if the vehicle has a passenger
airbag which cannot be deactivated.
(2) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat on the front passenger seat, check
that the airbag has been deactivated (please refer to the information on “Child safety: front passenger airbag deactiva-
tion, activation” in Section 1).
1.20
CHILD SAFETY: fitting a child seat (5/5)
X = Seat not suitable for fitting child seats.
U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.
Refer to the Child safety equipment” booklet available from the network to choose the seat suited to your child and “
recommended for your vehicle.
1.21
DRIVING POSITION, RIGHT-HAND DRIVE (1/2)
1.22
DRIVING POSITION, RIGHT-HAND DRIVE (2/2)
The presence of the equipment DEPENDS ON THE VEHICLE VERSION AND COUNTRY.
1 Side air vent.
2 Upper Glove Box
3 Centre air vents.
4 Steering column stalk for windscreen
wash/wiper.
5 Instrument panel.
6 Location for driver’s airbag.
7 Trip switch
8 Stalk
– direction indicator lights,
– exterior lights,
– front fog lights,
9 Side air vent.
10 Beam height adjustment control.
11 Horn
12 Heating and ventilation controls.
13 Electric central locking switch.
14 Electric power window control(driver
side).
15 Gear lever.
16 Handbrake.
17 Cigarette lighter or accessories
socket.
18 Location for ashtray or cup holder.
19 Electric power window con trol
(passenger side).
20 Hazard warning lights switch.
21 Location for radio/ Navigation
System
22 Lower Glove Box
1.23
áMain beam headlight tell-tale
light
kDipped beam headlight
telltale
gFront fog light tell-tale light*
cLeft-hand direction indicator
tell-tale
bRi g h t - h a n d di r e c t i o n
indicator tell-tale
Gear Shift Indicator
This symbol advises
you to change to a higher gear (up
arrow) or to a lower gear (down arrow)
in order to help you to reduce the fuel
consumption.
WARNING LIGHTS (1/3)
The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY.
If no lights or sounds are
apparent, this indicates
a fault in the instrument
panel. This indicates that
it is essential to stop immediately
(as soon as traffic conditions
allow). Ensure that the vehicle is
correctly immobilised and contact
an approved Dealer.
Instrument panel A
The red warning light
Ò requires you to stop
immediately, for your own
safety, as soon as traffic conditions
allow. Switch off the engine and do
not restart it. Contact an Authorised
Dealer.
Orange warning light comes on Ò
while you are driving, drive carefully
to an authorised dealer as soon
as possible. Failure to follow this
recommendation risks damaging your
vehicle.
1.24
WARNING LIGHTS (2/3)
The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY.
ÒWarning light malfunction
(red or orange)
Warning light (orange)
This lights up when the ignition is
switched on and goes out as soon as
the engine is started. It may comes
on in conjunction with other warning
lights on the instrument panel. It means
you should to an drive very carefully
authorised dealer as soon as possible.
If you fail to follow this recommendation,
you risk damaging your vehicle.
Urgent stop warning light (red)
This lights up when the ignition is
switched on and goes out as soon as
the engine is started. It lights up at the
same time as other warning lights, and
is accompanied by a beep. It requires
you to stop immediately, for your own
safety, as soon as traffic conditions
allow. Switch off the engine and do not
restart it. Contact an approved Dealer.
DHandbrake “on” warning
light and brake circuit
incident warning light
This comes on when the ignition is
switched on and goes out when parking
brake is dis-engaged. If it comes on
during braking and is accompanied
by a beep, it indicates that fluid level
in circuit is low. It may be dangerous
to continue driving.Contact approved
dealer.
ÚBattery charge warning light
If it comes on when you are
driving, it indicates that the circuit
has discharged. Consult an approved
Dealer as soon as possible.
1.25
Coolant temperature and
Oil Pressure Warning Light
It comes on when the ignition is switched
on and then goes out. If this remains lit/
comes ON while driving, accompanied
by a continuous beep, this means the
engine is overheating/engine oil is low.
It is essential to stop the vehicle.Allow
the engine to cool at idle speed for a
minute or two. The temperature should
drop. If not, stop the engine. Let it cool
down before checking the coolant level.
Check the oil level (refer to “Engine oil
level: general information” in Section
4). If the level is normal, the light has
come on for another reason: Consult an
approved dealer straight away.
The presence and operation of the warning lights DEPEND ON THE EQUIPMENT AND COUNTRY.
ÄWarning light for monitoring
exhaust gas
It comes on when the ignition is
switched on and then goes out.
– If it lights up continuously, consult
an approved dealer as soon as
possible;
– If it flashes, reduce the engine speed
until the light stops flashing. Contact
your approved Dealer as soon as
possible.
Refer to the information on “Advice:
antipollution, fuel economy, driving" in
Section 2.
WARNING LIGHTS (3/3)
Fuel gauge warning light
The number of bars lit shows the fuel
level.when all the bars disappears
and only red bar is lit,we advise you 1
to visit the nearest fuel outlet. Once
the fuel gauge light starts blinking
accompanied by a beep sound, fill with
fuel immediately, as the vehicle can
stop anytime.
1.27
ON-BOARD COMPUTER (2/2)
DISPLAY Interpreting the display selected
Total mileage recorder
Trip mileage recorder
Fuel used (since the last time the reset button was pressed)
Average fuel consumption (since the last time the reset button was pressed)
This value is displayed after driving 400 metres. This takes into account the distance
travelled and the fuel used since the last time the reset button was pressed.
Current fuel consumption
Estimated range with remaining fuel
Distance travelled (since the last time the reset button was pressed)
Average speed (since the last time the reset button was pressed)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
1.28
EXTERIOR LIGHTING AND SIGNALS
šSide lights
Turn the end of stalk until the 3
symbol is opposite mark .2
kDipped beam headlight
Depending on the vehicle, turn
the end of stalk down until the symbol 3
is opposite mark .2
á
Main beam headlights
With the dipped beam head-
lights lit, push stalk . The indicator on 3
instrument panel comes on.To return
to dipped headlight,pull the stalk 3
upward.
eSwitching off the lights
Turn the end of stalk until the 3
symbol is opposite mark .2
gFront fog light- ON/OFF
Turn centre ring on stalk until 1
the symbol faces mark 2. The fog lights
only light up if exterior lights have been
switched on. An indicator light on in-
strument panel then lights up.The cor-
responding indicator light goes out on
instrument panel when the fog lights
are switch off or the exterior lights are
switched off.
Headlight flasher : Pull stalk 3 towards
you to flash the headlights.
1 2 3
1.29
Headlight height Adjustment:
Knob is used to adjust height of the A
headlight beam according to load.Turn
control anticlockwise to lower the A
beams and clockwise to raise them.
Position
Only Driver Zero
Driver + front passenger Zero
Driver + Trunk o
Driver + All passengers oo
Driver + All
passengers+Trunk ooo
HEADLIGHT HEIGHT ADJUSTMENT
1.30
AUDIBLE AND VISUAL SIGNALS
Horn
Press on the centre or sides of the
highlighted (horn pad) to use the horn.
Direction indicators
Move stalk parallel to the steering 3
wheel and in the direction you are going
to turn it.
When driving on motorway, the steering
is not usually turned sufficiently to
enable the stalk to return automatically
to home position. There is intermediate
position where the stalk will not be held
for lane change indication and there
will be 3 blinks of indicator lights in
dedicated direction.
If it does not return back automatically,
release the stalk manually and it will
return to its home position.
éHazard warning lights
Press switch .2
This switch activates all four direction
indicators and the side indicator lights
simultaneously.
It must only be used in an emergency
to warn drivers of other vehicles that
you have had to stop in an area where
stopping is prohibited or unexpected,
or that you are obliged to drive under
special conditions.
2
3
1.32
Keep an eye on the condition of the
blade. They should be replaced as soon
as they become less efficient. This will
occur approximately once a year. Clean
your windscreen regularly.
If you switch off the ignition before
switching off the windscreen wiper
(position ) the blade will stop at A
random on the windscreen.
After switching the ignition back on,
simply move stalk to position to 1 A
place them in the park position.
WINDSCREEN WASHING / WIPING
nWindscreenWiper
With the ignition on, move the
stalk around the steering wheel (de-1
pending on the version):
A One time Mist Removal Function.
B Park.
C Intermittent wiping (depends on
vehicle version) - The wiper will
pause for several seconds between
sweeps.
D Normal wiping speed.
E Fast wiping speed.
s
Windscreen Washing
With the ignition on, pull stalk 1
towards you(depending on the version).
A brief pull will trigger a single sweep of
the wiper, in addition to the windscreen
washer.
A longer pull will trigger multiple sweeps
until the release of stalk in addition to 1
the windscreen washer.Once the stalk
is released, there will be three sweps
of the wiping and one additional sweep
after a few seconds.
In frosty weather, make sure that the
wiper blade is not stuck by ice (risk of
motor overheating).
Before any action on the
windscreen (washing the
vehicle, de-icing, cleaning
the windscreen, etc.), return
stalk to position (park).1 B
Risk of injury and/or damage.
When working in the engine
com p artm en t, ensu re
that the windscreen wiper
stalk is in the position 1 B
(park). Risk of injury.
1.33
FUEL TANK (1/2)
Opening the Fuel Flap
– Stop the Engine ;
– Pull up the fuel filler door release
lever 1 located on the floor, right front
side of driver’s seat which unlocks
the Fuel Flap ;A
– Turn the fuel filler cap B
counter clockwise slowly and
completely unscrew the cap ;
– Remove the cap ;
Do not wash the filler
area with a high-pressure
washer.
– After refueling, replace cap. Turn it
clockwise and screw completely ;
– Push the fuel filler door closed until it
latches.
NOTE: In cold weather, if the fuel filler
door does not open, tap the door lightly.
Then try to open it again.
Make sure that no water enters the fuel
tank during filling.
1
Fuel filler cap: this is specific to the
vehicle type. If you have to replace it,
make sure the new cap is of the same
type. Contact an approved dealer.
It is to use unleaded petrol.essential
Using leaded petrol will damage the
antipollution system and may lead to a
loss of warranty.
1.34
FUEL TANK (2/2)
Filling up with fuel
With the ignition off, insert the nozzle
fully before turning it on to fill the fuel
tank (risk of splashing).
Keep the nozzle in this position
throughout the entire filling operation.
When the pump cuts out automatically
at the end of the filling procedure, a
maximum of two further filling attempts
may be made, as there must be
sufficient space in the fuel tank to allow
for expansion.
– Never place the cap near
a source of heat or flame.
– Do not add any additives
to the fuel, you risk
damaging the engine.
If you notice a persistent fuel odour
you should:
– stop the vehicle as soon as traffic
conditions allow and switch off
the ignition;
– switch on the hazard warning
lights and ask your passengers to
leave the vehicle and stay clear
of the traffic;
– contact an approved Dealer.
2.1
Section 2: Driving
(Advice on use relating to fuel economy and the environment)
Running in, Ignition switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2
Starting / Stopping the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3
Gear lever, Hand brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5
Advice : antipollution, fuel economy and driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7
Sequential gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.10
2.2
RUNNING IN, IGNITION SWITCH
Running in
For the first , do not exceed 1,000 km
80 km/h in the highest gear.
You may only expect top performance
from your vehicle after approximately
3,000 kms
Oil change frequency: Please refer to
your vehicle’s maintenance schedule.
NOTE : During the running in period, do
not accelerate hard while the engine is
still cold and do not let the engine over-
rev.
Service intervals: refer to the
Maintenance Schedule for your vehicle. Stop and steering lock
position St
To lock: remove the key and turn the
steering wheel until the steering column
locks.
To unlock: turn the key and the steering
wheel slightly.
Accessories position A
When the ignition is switched off, any
accessories (radio, etc.) will continue to
function.
Ignition on position M
The ignition is switched on:
– the engine may be started.
Start position D
If the engine fails to start at the first at-
tempt, turn the key back to home posi-
tion before activating the starter again.
Release the key as soon as the engine
starts.
2.3
Special note
Depending on the vehicle, accessories
(e.g. radio) stop working either when
the engine is switched off or when the
doors are locked.
STARTING/STOPPING THE ENGINE
Starting the engine
In cold condition: switch on the ignition
for several seconds starting the before
engine, so that it is easier to start the
engine,
Petrol injection
– Activate the starter without de-
pressing the accelerator.
– Release the key as soon as the
engine starts.
Never leave your vehicle
with the key or remote con-
trol inside and never leave
a child (or a pet) unsuper-
vised, even for a short while.
The reason for this is that the child
may endanger himself or others by
starting the engine, activating equip-
ment such as the window winders
for example, or locking the doors.
Risk of serious injury.
Never switch off the ignition
before the vehicle has stopped
completely. Once the engine has
stopped, the brake servo, power as-
sisted steering and passive safety
equipment such as air bags will no
longer operate.
The steering is locked when the key
is removed.
2.4
STARTING/STOPPING THE ENGINE
Starting problems
To avoid damage , trying do not keep
to start the engine (by pushing or towing
the vehicle) without having identified
and corrected the cause of the fault .
If the fault cannot be identified, do not
continue to try and start the engine, but
contact an approved dealer.
The following operating conditions
should be avoided:
– driving for long periods when the low
fuel level warning light is lit;
– using leaded petrol;
– using fuel or lubrication additives
which are not approved.
Operating faults such as:
– faulty ignition, running out of fuel or
disconnected spark plugs resulting
in the engine misfiring or cutting out
when driving;
– loss of power,
may cause overheating, reducing ef-
ficiency which may irreparably
damage vehicle components and
also the vehicle.
If you notice any of the above operating
faults, have the necessary repairs car-
ried out as soon as possible by an ap-
proved dealer.
These faults may be avoided by regu-
larly taking your vehicle to an approved
Dealer at the intervals specified in the
Maintenance Schedule.
Do not park the vehicle or
run the engine in locations
where combustible sub-
stances or materials such
as grass or leaves can come into
contact with the hot exhaust system.
2.5
refer
to the grid on the gear lever knob .1
Depending on the gradient
and/or vehicle load, it may
be necessary when statio-
nary to apply the brake by
at least a further two notches and
engage a gear (1st or reverse gear).
Depending on the vehicle, to obtain op-
timum consumption levels, an indicator
light on the instrument panel lets you
know the best time to move up or down
a gear.
An impact to the under-
side of the vehicle while
manoeuvring (e.g.: stri-
king a post, raised kerb or
other street furniture) may result in
damage to the vehicle (e.g.: defor-
mation of an axle).To prevent any
risk of accident, have your vehicle
checked by an approved dealer.
2.6
Pull lever up slightly, press button 3 2
and then lower the lever to the floor.
The red warning light on the instrument
panel will come on and a sound if you
are driving with an incorrectly released
handbrake.
Pull lever upwards and make sure the 3
vehicle is immobilised.
Make sure that the hand-
brake is properly released
when driving (red indi-
cator light off), otherwise
overheating, or even damage, may
occur.
Depending on the gradient
and/or vehicle load, it may
be necessary when statio-
nary to apply the brake by
at least a further two notches and
engage a gear (1st or reverse gear).
2.7
Your vehicle has been designed with
respect for the in mind environment
for its entire service life.
By virtue of its design, moderate fuel
consumption and initial settings, your
vehicle also conforms to current anti-
pollution regulations. The manufac-
turer is actively striving to reduce pol-
lutant exhaust gas emissions and to
save energy. But the fuel consumption
of your vehicle and the level of pollutant
exhaust gas emissions are also your
responsibility. Ensure that it is main-
tained and used correctly.
Maintenance
It should be noted that failure to respect
antipollution regulations may lead to
legal action being taken against the
vehicle owner. In addition, replacing
engine, fuel supply system and exhaust
components with parts other than those
originally recommended by the manu-
facturer may alter your vehicle so that
it no longer complies with antipollution
regulations.
Have your vehicle adjusted and
checked by an authorised dealer, in ac-
cordance with the instructions given in
your Owner’s Manual: they will have all
the equipment necessary for ensuring
that your vehicle is maintained to its
original standard.
Aiding fuel economy
Depending on the vehicle, in order to
optimise consumption, an indicator light
on the instrument panel will inform you
of the best moment to upshift or down-
shift gears:
shift up a gear ;
shift down a gear .
ADVICE: antipollution, fuel economy and driving (1/3)
Engine adjustments
– ignition: this does not require ad-
justment.
– spark plugs: for optimum fuel econ-
omy, efficiency & performance the
specification laid down in Owner’s
Manual must be strictly applied.
If the spark plugs have to be changed,
contact an approved dealer for this.
– this does not require ad-idle speed:
justment.
– a choked ele-air filter, oil filter:
ment hinders performance. It must
be replaced as per the maintenance
schedule.
Emissions
Your vehicle has been designed to emit
fewer greenhouse gases (CO2) while
in use.
2.8
Driving
– Drive carefully for the first few kilo-
metres until the engine reaches
its normal operating temperature,
rather than let it warm up while the
vehicle is stationary.
– Speed is expensive. Sporty driving
uses a lot of fuel: drive with a light
foot.
– Study the road ahead so that you are
able to brake as little as possible, it
can be sufficient just to lift off the ac-
celerator.
ADVICE: antipollution, fuel economy and driving (2/3)
– Avoid sudden acceleration.
– Do not overrev the engine in the in-
termediate gears. Always use the
highest gear possible without labour-
ing the engine.
Make your own contribution
towards protecting the
environment
– Worn parts replaced in the course of
routine vehicle maintenance (vehi-
cle battery, oil filter, air filter, batter-
ies, etc.) and oil containers (empty
or filled with used oil) must be dis-
posed of through authorised Renault
Dealer
– In all cases, comply with local legis-
lation.
2.9
Advice on use
– Electricity is fuel; switch off all the
electrical components which are not
really needed.
However (safety first), keep your
lights on when the visibility is bad
(“see and be seen”).
– Driving with the windows open at
around 100 km/h will increase fuel
consumption by approximately 4%.
– Poor weather conditions, flooded
roads. Do not drive through water if it
is higher than the lower edge of the
wheel rim.
– Avoid using the vehicle for door-to-
door journeys (short journeys, with
long stops in-between) because in
these conditions, the engine never
reaches its ideal temperature.
Tyres
Increased fuel consumption could be
the result of:
– insufficient pressure,
– using non-recommended tyres.
Exhaust gas monitoring
system
This system detects operating faults
in the vehicle’s antipollution system.
These faults may cause mechanical
damage or release of harmful sub-
stances.
ÄThis warning light on the in-
strument panel indicates if
there are any faults in the system:
This comes on when the ignition is
switched on and goes out after three
seconds.
– If it comes on continuously, consult
an approved dealer. If it flashes,
reduce the engine speed until the
light stops flashing. Contact an ap-
proved dealer as soon as possible.
– Do not try to maintain the same
speed up a hill, accelerate no more
than you would on the level. Keep
your foot in the same position on the
accelerator pedal.
ADVICE: antipollution, fuel economy and driving (3/3)
2.10
Gear Rotary Shifter 1
This allows you to engage forward
gear, reverse and neutral.
Gear shift pattern
Align the letters R/N/D to the red
pointer.
A where R/N/D stands for:
D Drive mode
N Neutral
R Reverse mode
NOTE:
– The red pointer is fixed.
– R/N/D is roating switch.
Display
The engaged gear (R/N/D) is indicated
on the instrument panel display .2
In case, gear is not engaged properly,
letter R or D will blink on the cluster.
If RN/ND blinks together, this indicates
that rotary shifter is not in proper posi-
tion. Driver advised to shift accordingly.
3 -Brake pedal press warning light.
AUTOMATED MANUAL TRANSMISSION (1/4)
For safety reasons, do not switch off the ignition before the vehicle has come to a complete standstill.
2.11
Creeping
It is a function that enables the vehicle
to move very slowly without depressing
the accelerator pedal.Follow steps as:
– Start the engine as instructed in
“Starting the engine” section.
– With the foot on brake pedal, shift the
rotary knob to “D” and ensure “D” glows
in cluster permanently.
– Release the parking brake and brake
pedal to activate creeping.
AUTOMATED MANUAL TRANSMISSION (2/4)
Similar to a veh ic le
equipped with a manual
gearbox,this vehicle is also
not able to prevent itself
from rolling on a slope if the hand-
brake is not applied or the brake
pedal not pressed continuously in
“N” mode.
The vehicle should always be towed
in Ignition OFF condition with neu-
tral position.
In cold weather start the engine and
wait for a few seconds before rotat-
ing the gear rotary shifter from N to
D/R position to prevent engine stall-
ing.
Starting the engine
Switch ON ignition. To start engine,
keep the key in ignition and wait for 3
seconds to initiate starting sequence.
When starting the engine, always place
the rotary knob in “N” position and
depress the brake pedal firmly. The
engine cannot be started unless the
rotary knob is in “N” position and brake
pedal is depressed. Do not press accel-
erator pedal while starting the engine.
Starting off on an uphill/
downhill
– Apply parking brake so that vehicle
will not move.
– Shift the rotary gear knob to “D” while
depressing the brake pedal. Make sure
that gear position indicator displays “D”
in cluster.
– Release the brake pedal and depress
the accelerator gradually. Once the ve-
hicle starts to move, release the park-
ing brake and continue to depress ac-
celerator to start off.
NOTE
Brake pedal warning light glows if brake
pedal is not pressed when,
– Starting the engine.
– Engine ON and rotary knob shifted
from “N” to R/D.
– Ignition is ON and engine is OFF,
rotary knob shifted from “N” to R/D.
– Driver door is open and R/D is en-
gaged.
NOTE
Once the vehicle is switched to igni-
tion ON position, the gearbox initial-
izes. This produces a light sound.This
is normal. Crank the engine after 3 sec-
onds.
2.12
AUTOMATED MANUAL TRANSMISSION (3/4)
Driving in automatic mode
When ignition is switched ON, start the
vehicle in neutral “N” with brake pedal
pressed,rotate the gear shifter to D to
engage drive mode.
The letter D appears on the display.The
vehicle is controlled using the acceler-
ator and the brake. Gears will change
automatically at the optimal moment.
Automatic mode takes account of:
– The position and speed of depres-
sion of the accelerator pedal to
assess driving style and select the
optimal gear.
– The position and speed of depres-
sion of the brake to commence
engine braking in preparation for a
downshift.
– If the gear does not engage to R/D
even the rotary knob is shifted,
system shifts automatically after
sometime and creates some noise
from gears.This does not indicate
any malfunction.
However, if the system does not
shift automatically, shift gear knob to
“N” and again shift to R/D in brake
pedal pressed condition.R/D indi-
cator and brake pedal indicator will
flash on the cluster if the rotary knob
shifted to R/D from “N” without de-
pressing brake pedal.
Reverse gear
With the brake pedal pressed, rotate
the gear shifter to R. The letter R dis-
plays on the cluster.Release the brake
pedal slowly to allow vehicle to move in
reverse direction. Press the accelerator
pedal gently to increase the speed.
–The engine idle speed (creep function)
is sufficient for parking manoeuvres.
To drive, shift the gear from “R” to “D”
by rotating the gear rotary lever once
the vehicle is stationary.Press brake
pedal to engage a gear when vehicle is
stationary else, warning light will come
on cluster.
When stopped at traffic lights, with the
gear engaged in “D”,keep the ve-
hicl e s tatio nary b y cont inu-
ou sl y pr es si ng t he b r a k e
pedal without changing the gear shifter
to neutral .N
The vehicle will begin moving again:
– Either slowly, if the brake is released
without accelerating (e.g. when in a
traffic jam).
– Or quickly, by releasing the brake
and accelerating.
ACTIONS TO AVOID
1.Using accelerator pedal to keep the
vehicle stationary on an uphill slope
while shifting the gear to R/D willl create
a warning buzzer sound.
2.Shifting the rotary knob to R/D while
depressing the accelerator.
3.Maintaining the vehicle stationary on
an uphill slope using creeping function
will create a warning buzzer sound.
2.13
Precautions in Drive mode
– If the vehicle is kept sta -
tio nar y on a sl o pe fo r
too long without applying the brakes
or handbrake,it will strain the
system and there is a risk that the
clutch will overheat.
In this case, an intermittent beep-
ing sound will indicate that the brake
pedal or hand brake needs to be ap-
plied.
– Never leave the vehicle with the
engine running with gear engaged
condition.
– A warning light related to brake ap-
plication will appear on the cluster if
brake/handbrake is not applied.
– If engine ON and the vehicle is sta-
tionary, it is recommended to keep
the brake pedal in pressed condition.
AUTOMATED MANUAL TRANSMISSION (4/4)
Accelerating and overtaking
–Slowly depress the accelerator pedal
to accelerate gradually.
–to obt ain ma ximum ve hicle
performance,depress the accelera-
tor pedal quickly and completely.
–the speed with which the accelerator
pedal is depressed is directly related
to the speed with which the vehicle
automatically shifts to a lower gear to
accelerate quickly.
Parking
To park the vehicle, first bring the vehi-
cle to stationary position.
– If the road is flat, then rotate the gear
shifter to N and engage the hand-
brake and switch off the ignition to
complete the parking manoeuvre.
– On a slope, it is recommended to
keep the gear shifter in R/D, engage
the handbrake and switch off the ig-
nition to complete the parking ma-
noeuvre.
Towing your automated
manual transmission vehicle
If the gear is engaged in R/D,
– Switch on the ignition.
– Press brake pedal.
– Select neutral (N).
– Release Brake pedal.
– Check that gear engaged in “N” by
ensuring permanent display of letter
N in cluster.
– Turn OFF ignition.
If neutral is not engaged and no indi-
cation in cluster,must tow the vehicle
with the front wheels raised.
Stopping the vehicle
The vehicle can be stopped by de-
pressing the brake pedal regardless of
gear position This is because, clutch is
automatically disengaged to prevent
the engine from stopping.
2.14
3.1
Section 3: Your comfort
Air vents, air outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2
Heating, Ventilation, Air conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4
Air conditioning: information and advice on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7
Courtesy Light, Sun visor and Grab handle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8
Passenger compartment storage and fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9
Rear seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.10
Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.11
Multimedia equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.12
3.2
AIR VENTS, air outlets (1/2)
1 3 5 Left-hand side air vent Centre air vents Control panel
2 4 6 Windscreen demisting vents Right-hand air vent Front passangers footwell heater outlets
3.4
Adjusting the ventilation fan
speed.
Turn control 3 from 0 to 4. The further to
the right it is positioned, the more air is
blown into the passenger compartment.
If you want to shut off the flow of air
completely and stop the system, set
control to 0.3
The system is deactivated: the
ventilation speed for the passenger
compartment air is zero (vehicle
stationary), you can however still feel
a slight flow of air when the vehicle is
moving.
HEATING, VENTILATION, AIR CONDITIONING (1/2)
Controls
The controls will depend on the vehicle
equipment level.
1 Air temperature adjuster.
2 Switching air conditioning on or off.
3 Adjusting the ventilation fan speed.
4 Distribution of Air.
5 Switching passenger compartment
to isolation mode / air recirculation
mode.
Leaving this control in position 0
for prolonged periods can lead
to condensation forming on the
side windows and windscreen
and problems due to the use of
non-renewed air in the passenger
compartment.
Information and advice on use: refer
to information on “Air conditioning:
information and advice on use”.
Adjusting the air temperature
Turn control to obtain the desired 1
temperature. The further towards
the red the slide is, the higher the
temperature will be.
3.5
HEATING, VENTILATION, AIR CONDITIONING (2/2)
Switching passenger
compartment isolation mode/
air recirculation mode on.
Bring lever to position .5â
Under these conditions, air is taken
from the passenger compartment and
is recirculated, with no air being taken
from outside the vehicle.
Prolonged use of air recirculation
can lead to condensation forming
on the windscreen, and discomfort
due to the use of non-renewed air in
the passenger compartment.
You are therefore advised to pick-up
external air as soon as the air
recirculation function is no longer
required, by sliding control to the 5
right.
Rapid demisting
Turn controls , and to positions 1 3 4
W:
– Turn control 1 on full hot position
– Turn control 3 on max speed position 4
– Turn control 4 to full defrost mode.
– move slider knob 5 to fresh air mode.
Using the climate control increases the
speed of demisting.
Information and advice on use: refer
to information on “Air conditioning:
information and advice on use”.
Air recirculation is used to:
– to isolate the passenger compartment
from the external atmosphere
– to bring the passenger compartment
to the desired temperature as quickly
as possible.
3.6
Fuel consumption
You will normally notice an increase
in fu el co nsu mpt ion (especially
when driving in town) when the air
conditioning is operating.
Advice for reducing consumption
and helping to preserve the
environment
Drive with the air vents open and the
windows closed.
If the vehicle has been parked in the
sun, open the doors for a few moments
to let the hot air escape before starting
the engine.
Maintenance
Refer to the Maintenance Document
for your vehicle for the inspection
frequency.
AIR CONDITIONING: information and advice on use
Operating faults
As a general rule, contact your approved
dealer in the event of an operating fault.
– Reduction in de-icing, demisting
or air conditioning performance.
Contact an approved Renault Dealer.
– .No cold air is being produced
Check that the controls are set
correctly and that the fuses are
sound. Otherwise, switch off the
system.
Presence of water under the
vehicle
After prolonged use of the air
conditioning system, it is normal for
water to be present under the vehicle.
This is caused by condensation.
Do not open the refriger-
ant fluid circuit. The fluid
may damage eyes or skin.
3.7
Manual window winders
Depending on the version, turn
handle 1 to lower or raise the window to
the desired height.
Electric window
Dashboard switches
Press the bottom of switch or to 2 3
open the window or press the top of
switch or to close it to the desired 2 3
level.
2 for the passeneger side.
3 for the front driver side.w
WINDOWS
Avoid resting any objects
against a half-open window:
there is a risk that the
electric window could be
damaged.
Driver’s responsibility
If a body part gets trapped,
reverse the direction of
travel of the window as soon
as possible by pressing the relevant
switch.Never leave your vehicle with
the key inside and never leave a
child (or a pet) unsupervised, even
for a short while. They may pose
a risk to themselves or to others
by starting the engine, activating
equipment such as the electric
windows or by locking the doors.
23
3.8
COURTESY LIGHT, SUN VISOR AND GRAB HANDLE
Rear Grab handle 3
This feature depends on the vehicle
version.
This offers support and can be held
when the vehicle is being driven.
Do not use it for getting into or out of
the vehicle.
Front sun visor
This feature depends on the vehicle
version.
Lower the sun visor over the 2
windscreen or unclip it and turn it over
the side window.
Courtesy light
This feature depends on the vehicle
version.
– Press switch to position for 1 A
switching the light.ON
– Press switch to position for auto 1 B
- ON lighting, which activates when
a door is opened and switches off
when both the front doors have been
closed correctly;
– Press switch to position for 1 C
switching the light.OFF
C
B
A
3.9
Upper Glove Box 1
Open Storage 2
Lower Glove box 3
.Need to press at the lowest center
of the lid to open and close gently by
pressing on the same point.
Pull handle to open lower glove box.3
PASSENGER COMPARTMENT STORAGE, FITTINGS
Accessories socket 7
They are provided for connecting ac-
cessories approved by our Technical
Department.
Door Storage Compartment 4
Cup Holder , 5 6
Ensure that no hard, heavy
or pointed objects are
placed in the “open” storage
compartments in such a way
that they may fall onto passengers
during sudden turning, braking or in
the event of an accident.
6
Connect accessories with
a maximum power of
120 watts (12 V) only.
When several accessory
sockets are used at the same time,
the total power of the connected
accessories must not exceed
180 watts.
Fire hazard.
4
5
7
3.10
REAR SEATS
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Check that the rear seat belts are
positioned and operating correctly
each time the rear seat is moved.
Never allow anyone to ride in the
luggage area or on second row seat
when it is in the fold-down position.
Use of these areas by passengers
without proper restraints could
result in serious injury in an accident
or sudden stop.
Properly secure all luggage to help
prevent it from sliding or shifting. Do
not place luggage higher than the
backrest.
When operating the backrest, be
careful not to scratch or damage
seat belts.
Fold the backrest
This feature depends on the vehicle
version.
Store the seat belts in proper position.
Hold the straps and on both ends B C
of seat and pull them upward and fold
the backrest down till .A
To un-fold the seat back-rest
Lift up seat back and push to the upright
position until it is latched on both sides.
3.11
BOOT
To open
From the outside
Insert the key in the boot lock , turn 1
it and lift the boot lid.
From the inside
Pull the lever , then lift the boot lid.2
To close
Lower the boot lid from point using 3
your hands and properly close it.
1
3.12
MULTIMEDIA EqUIPMENT
The presence and location of this
equipment depends on the vehicle’s
version and multimedia equipment.
1 Radio or navigation system
2 Microphone.
To use this equipment, consult the
instructions for the equipment which
should be kept with the other vehicle
documentation.
Using the telephone
We remind you of the need
to conform to the legislation
in force concerning the use
of such equipment.
Hands-free telephone
integrated control
On eq u ipp e d v eh i cles, us e
microphone 2
If your vehicle is not fitted with an audio
system, one can be fitted and locations
have been provided for the radio ;1
To install any equipment, please consult
an authorised dealer.
Refer Multimedia manual for more
details
– In all cases, it is very important to follow the manufacturer’s instructions
carefully.
– The specifications of the brackets and wires (available from our network) vary
depending on the equipment level of your vehicle and the type of radio.
Consult your approved Dealer to find out the correct part number.
– No work may be carried out on the vehicle’s electrical or radio circuits, except
by approved Dealers: an incorrectly connected system may result in damage
being caused to the electrical equipment and/or the components connected to
it.
4.2
To open the bonnet, pull the knob .1
To unlock, gently lift the bonnet and
push tab 2 in the direction of arrow to A
release the latch .3
Lift the bonnet; remove the Hood-Stay
rod from lock clip and place into the
hole to hold the Hood open.
To close the bonnet again, remove the
Hood-Stay rod from the hole and 4
place to the lock clip; lower it to 30 cm
above the closed position, then release
it. It will latch automatically under its
own weight.
The engine may be hot
during operations in close
proximity. In addition, the
engine cooling fan may
come on at any moment.
Risk of injury.
In the event of even a slight
impact involving the radia-
tor grille or bonnet, have
the bonnet lock checked by
an approved Dealer as soon as pos-
sible.
Do not press down on the
bonnet: there is a risk that
the bonnet may accidentally
close.
Make sure nothing is left
in the engine compartment
(cloth, tools, etc.).
These may damage the
engine or cause a fire.
Ensure that the bonnet is
properly locked.
Ensure that nothing is pre-
venting locking (grit, cloths,
etc.).
When working in the engine
compartment, ensure that
the windscreen wiper stalk
is in the park position.
Risk of injury.
4.3
– Remove the dipstick and wipe with a
clean, lint-free cloth;
– Guide the dipstick in as far as it will
go (for vehicles equipped with a
captype dipstick, screw the cap in as
far as it will go);
– Take out the dipstick again;
– Read the level: it should never fall
below minimum mark or exceed
maximum mark.
It is normal for an engine to use oil for
lubrication and cooling of moving parts
and it is normal to top up the level
between oil changes.
However, contact your approved
Dealer if more than 0.5 litres is being
consumed every 1,000 kms after the
running in period.
In order to prevent splashback, it is
recommended that a funnel be used
when topping up/filling with oil.
Consult your approved dealer at
once if you notice an abnormal or
repeated drop in any of the fluid
levels
Once the operation has been
completed, ensure that the dipstick
is guided in as far as it will go or that
the “cap-type dipstick” is completely
screwed in.
Under no circumstances
must the maximum fill level
be exceeded: risk of damage to the
engine and catalytic converter.
If the oil level exceeds the maximum
level, and
contact an approved Dealer.
Before performing any
action in the engine com-
partment, the ignition must
be switched off by pressing
the engine stop button (please see
the information on “Starting, stop-
ping the engine” in Section 2).
4.5
refer to the
Maintenance Document for your
vehicle.
Please refer to the maintenance docu-
ment for your vehicle, or contact an au-
thorised dealer.
Always check the engine oil level using
the dipstick, as explained previously (it
should never fall below the minimum
Refer to the maintenance document for
your vehicle.
The oil level should only
be read with the dipstick
as explained above. If the oil level
exceeds the maximum level,
and contact an
approved dealer.
Take care when topping up
the oil that no oil drips onto
engine components.
RISK OF FIRE
Rememebr to re-fit the cap securely
as there is a risk of fire if oil splashes
onto hot engine components.
4.6
This should be checked frequently,
and immediately if you notice even the
slightest loss in braking efficiency.
The level should be read with the engine
switched off and on level ground.
1
It is normal for the level to drop as the
brake shoes become worn, but it must
never drop lower than the warn-
ing line shown on brake fluid reservoir.
If you wish to check the disc and drum
wear yourself, you should obtain the
document explaining the checking
procedure from the approved dealer
network or from the manufacturer’s
web site.
After any operation on the hydrau-
lic circuit,a specialist must replace
the fluid.Only use fluids approved by
RENAULT and which have been taken
from a sealed container.
The engine may be hot
during operations in close
proximity. In addition, the
engine cooling fan can
come on at any moment.
Risk of Burns and Injury.
With the engine switched off, open the
cap.Fill until you can see the 2
fluid, then replace the cap.
Special windscreen washer
fluid (antifreeze product for winter).
Use a tool such as a needle to
adjust the height of the windscreen
washer jets.
Consult your approved
dealer at once if you notice
an abnormal or repeated
drop in any of the fluid
levels. No operations should be car-
ried out on the cooling circuit when
the engine is hot.
4.8
The charge status of your battery can
decrease especially if you use your
vehicle:
– for short journeys ;
– for driving in town ;
– when the temperature drops ;
– after extended use of consumers
(radio etc.) with the engine switched
off.
The battery does not require any 1
maintenance.
Handle the battery with
care as it contains sulphu-
ric acid, which must not
come into contact with eyes
or skin. If it does, wash the affected
area with plenty of water and see a
doctor if necessary.
Ensure that naked flames, red hot
objects and sparks do not come into
contact with the battery as there is a
risk of explosion.
4.9
A
Observe the indications on the battery:
– Naked flames and smoking are 2
forbidden;
– Eye protection required;3
– Keep away from children;4
– Explosive materials;5
– Refer to the handbook;6
– Corrosive materials.7
The engine may be hot
during operations in close
proximity. In addition, the
engine cooling fan may
start at any moment.
Risk of injury.
As this operation is complex, we advise
you to contact an approved Dealer.
4.10
Aun-laden condition for front tyre
pressure ;
Bladen condition for front tyre
pressure ;
C un-laden condition for rear tyre
pressure ;
Dladen condition for front tyre
pressure ;
Etyre pressure for spare wheel.
the maximum speed must be
limited to 100 kph.
Front
Rear
Spare
Wheel
lead to abnormal tyre wear
and unusually hot running.
These are factors which
may affect safety and lead to poor
road holding,
– risk of bursting or tread
separation.
– The pressure depends on the
load and the speed of use. Adjust
the pressure according to the
conditions of use.
– Please be aware that a poorly
tightened or missing valve cap
can make the tyres less airtight
and lead to pressure loss. –
– Always use valve caps identical
to those fitted originally and tighten
them fully.
Adhere to the tyre pressures (including
the emergency spare wheel). The tyre
pressures should be checked at least
once a month and additionally before
any long journey.
Tyre pressures should always be
checked when the tyres are cold,
ignore higher pressures which may be
reached in hot weather or following a
fast journey.
If the tyre pressures cannot be checked
when the tyres are cold, increase the
pressures from 0.2 to 0.3 bar (or 3 PSI).
Refer the table for the Tyre Pressure in
your vehicle.
A label of the tyre pressure details is
pasted on the driver door of the vehicle.
4.11
Wash your car frequently,
, with cleaning products
recommended by the manufacturer
(never use abrasive products). Rinse
thoroughly with a jet:
– spots of tree resin and industrial
grime;
– mud in the wheel arches and
underneath the body which forms
damp patches;
– , which cause a
chemical reaction with the paint that
wash the vehicle
to remove these marks since it
is impossible to remove them by
polishing;
– salt, particularly in the wheel arches
and underneath the body after
driving in areas where the roads
have been gritted.
Remove any plant matter (resin, leaves,
etc.) from the vehicle regularly.
Do not degrease or clean mechanical
co mponents (e.g. the engine
compartment), underneath the body,
parts with hinges (e.g. inside the doors)
and painted plastic external fittings
(e.g. bumpers) using high-pressure
cleaning equipment or by spraying on
products not approved by our Technical
Department. Doing this could give rise
to corrosion or operational faults.
Wash the vehicle in bright sunlight or
freezing temperatures.
Scrape off mud or dirt without pre-
wetting.
Allow dirt to accumulate on the exterior.
Allow rust to form following minor
impacts.
Use solvents not approved by our
Technical Department to remove stains
as this could damage the paintwork.
Drive in snow or muddy conditions
without washing the vehicle, particularly
under the wheel arches and body.
A well-maintained vehicle will last
longer. It is therefore recommended
to maintain the exterior of the vehicle
regularly.
Your vehicle has been treated with very
effective anti-corrosion products. It is
nevertheless subject to various outside
influences.
– atmospheric pollution (built-up and
industrial areas),
– saline atmospheres (near the sea,
particularly in hot weather),
– seasonal and damp weather
conditions (e.g. road salt in winter,
water from road cleaners, etc.).
Dust and sand in the air, mud, road grit
thrown up by other vehicles, etc.
You should take a number of minor
precautions in order to safeguard your
vehicle against such risks.
4.12
Respect local regulations about
washing vehicles (e.g. do not wash
your vehicle on a public highway).
Observe the vehicle stopping distances
when driving on gravelled surfaces to
prevent paint damage.
Repair, or have repaired quickly, areas
where the paint has been damaged, to
prevent corrosion spreading.
Remember to visit the body shop
periodically in order to maintain your
anti-corrosion warranty. Refer to the
Maintenance Document.
If it is necessary to clean mechanical
components, hinges, etc., spray
them with products approved by our
Technical Department to protect them
after they have been cleaned.
We have selected special products
to care for your vehicle and you can
obtain these from the manufacturer’s
accessory outlets.
Return the windscreen wiper stalk to the
Park position (refer to the information
on the “Windscreen washer, wiper”
in Section 1). Check the mounting of
external accessories, additional lights
and mirrors, and ensure that the wiper
blades are secured with adhesive tape.
Remove the radio aerial must if your
vehicle is fitted with this equipment.
Remember to remove the tape and refit
the antenna after washing.
As the headlights are made of plastic
“glass”, use a soft cloth or cotton wool
to clean them. If this does not clean
them properly, moisten the cloth with
soapy water, then wipe clean with a soft
damp cloth or cotton wool.
Finally, carefully dry off with a soft dry
cloth.
This type of paint requires certain
precautions.
– use wax-based products (polishing);
– rub hard;
– wash the vehicle in a roller-type car
wash;
– wash the vehicle using a high-
pressure device;
– attach stickers to the paintwork (risk
of leaving marks).
Wash the vehicle by hand using plenty
of water, using a soft cloth or a gentle
sponge.
4.13
(e.g. instrument panel, clock, exterior
temperature display, radio display, etc.)
Use a soft cloth (or cotton wool).
No liquid cleaning agents and water
should be used to clean the Instrument
panel.
It is recommended to use only soft and
dry cloth to clean the instrument panel
as there is no glass screen on the
same.
These must be kept clean.
Use products selected by our Technical
Department (Approved outlets) or
warm, soapy water and a sponge and
wipe with a dry cloth.
Vacuum-clean the textiles .
Use soapy water.
Dab lightly (never rub) with a soft cloth,
rinse and remove the excess.
Carefully remove the excess solid or
pasty material with a
spatula (working from the edges to the
centre to avoid spreading the stain).
Clean in a similar way as a liquid stain.
Put an ice cube on the stain to solidify
it, then proceed as for a solid stain.
A well-maintained vehicle will last
longer. It is therefore recommended
to maintain the interior of the vehicle
regularly.
A stain should always be dealt with
swiftly.
Whatever type of stain is on the trim,
use (or warm)
.
Use a soft cloth.
Rinse and soak up the excess.
For further recommendations for
maintaining the interior, and/or for
any unsatisfactory results, please
see an authorised dealer.
4.14
You are strongly advised not to position
objects such as deodorants, scents,
etc. near air vents, as this could
damage your dashboard trim.
Yo u a r e s t ro n g l y
recommended not to use
highp ressure or spray
cleaning equipment inside
the passenger compartment: use
of such equipment could impair the
correct functioning of the electrical
or electronic components in the
vehicle, or have other detrimental
effects.
If you need to remove equipment
in order to clean the passenger
compartment (for example, mats),
always ensure that they are correctly
refitted and they are at correct position.
(The driver’s mat should be fitted on
the driver’s side, etc.) and fit them
with the components supplied with the
equipment (for example, the driver mat
should always be fixed using the pre-
fitted mounting components).
With the vehicle stationary, ensure that
nothing will impede driving (anything
obstructing the pedals, heel wedged by
the mat, etc.).
5.1
Section 5: Practical advice
Puncture, emergency spare wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2
Wheel trim, tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3
Changing a wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4
Tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6
Front lights-Changing headlamps main bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.9
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.10
Radio frequency remote control: batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13
Battery - Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.14
Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.17
Operating faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.18
5.2
Jack must be placed only in
specific places provided for
it. Placing jack against Rear
Axle or Front Transversal
Link is strictly prohibited.
If sp a re wh e e l is
stored for long, get it
checked by Dealer to
ensure that it is safe to use.
– Never fit more than one emer-
gency spare wheel to the same
vehicle.
– Replace the emergency spare
wheel as soon as possible with
the original one.
This is located in the luggage
compartment.
To access it :
– Open the boot ;
– depending on the vehicle, remove
the carpet ;
– Unscrew the sparewheel lock ;1
– remove emergency spare wheel ;2
– Stud .3
– Jack pouch A
If the vehicle is parked on
the hard shoulder, you must
warn other road users of
your vehicle’s presence
with a warning triangle or with other
devices as per the legislation apply-
ing to the country you are in.
: ensure that the emergency
sp are wh ee l or p un ctured
whe el a re correctly p osi-
ti oned. Che ck that the bo ot
carpet is correctly positioned in its
bump stops to prevent it from being
damaged.
5.3
(example: wheel trim )1
Depending on the version,the bolts
are directly accessible directly or after
removing the wheel cap.
Ne v e r le a v e t o ol s
unsecured in the vehicle:
there is a risk that they may
be thrown about during
braking. After use, make sure the
tools are correctly positioned in their
housings: there is a risk of injury.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used
for carrying out repairs underneath
the vehicle or to gain access to the
underside of the vehicle.
2 3
Jack is in a jack pouch and is placed 2
on the left side of the spare wheel. To
use the jack, take it out from pouch with
care. While keeping it back, fold it up
completely and replace it in the pouch.
The wrench is placed along with 3
warning triangle. Replace it in the same
pouch after use.
5.4
Place the jack under the body ,and
align it to be in-between two locating
markings. It is forbidden to lift the car
by placing any jack under front control
arms, rear axle and subframe.
Crank the jack using wheel wrench until
the tyre raises up and sufficient
Use the wheel wrench to loosen the
wheel bolts by firmly holding the wrench
and applying force to unscrew.
Remove completely one of the wheel
bolts and screw-in the stud (provided
in spare wheel lock screw ) in its place,
this helps to locate wheel while refitting
and retains position when all the wheel
bolts are removed.
Switch on the hazard warn-
ing lights.Keep the vehicle
away from traffic and on a
level surface where it will
not slip (if necessary, place a solid
support under the jack base).Apply
the parking brake and engage a
gear (first or reverse).
Ask all passengers to leave the
vehicle and keep them away from
traffic. If the vehicle is parked on
the hard shoulder, you must warn
other road users of your vehicle’s
presence with a warning triangle.
5.5
-by aligning one of holes to the stud in
the wheel drum/disc
Keep the wheel cover (on select
variants) and wheel bolts handy, place
and hold the wheel cover to align with
the stud and fasten the 2 wheel bolts in
the remaining locations.
Ensure the wheel is fastened sufficient
enough, so that removing stud will not
cause the wheel to come out off the
drum/disc.
Replace the stud by bolt and put the
stud back in spare wheel lock screw
cap by gently pressing it in the groove.
Using the wrench, tighten the bolts
evenly. Uncrank (release) the jack using
wheel wrench till the jack becomes free
from holding the vehicle anymore.
Now tighten fully the wheel bolts.
Place the punctured or removed wheel
in spare wheel storage area and lock it
by provided lock screw.
Place the wheel wrench and jack in
pouch.
If the vehicle is parked on
the hard shoulder, you must
warn other road users of
your vehicle’s presence
with a warning triangle or with other
devices as per the legislation apply-
ing to the country you are in.
If you have a puncture, re-
place the wheel as soon
as possible.A tyre which
has been punctured should
always be inspected (and repaired,
where possible) by a specialist.”
5.6
The tyres must be in good condition
and the tread form must have
sufficient depth; tyres approved by
our Technical Department have tread
wear indicators which are 1
.
The tyres are the only contact between
the vehicle and the road, so it is essential
to keep them in good condition.
You must make sure that your tyres
conform to local road traffic regulations.
When the tread has worn down to the
wear warning strips,
: it is then necessary 2
to replace your tyres because the tread
rubber is now
.
An overloaded vehicle, long journeys
by motorway, particularly in very hot
weather, or continual driving on poorly
surfaced minor roads will lead to more
rapid tyre wear and affect safety.
Incidents which occur when
driving, such as striking the
kerb, may damage the tyres
and wheel rims, and could
also lead to misalignment of the
front or rear axle geometry. In this
case, have the condition of these
checked by an approved dealer.
For your safety, please re-
spect the speed limit.
When they need to be re-
placed, only tyres of the
same make, size, type and profile
should be used on a single axle.
Failure to heed these instructions
could endanger your safety and
affect your vehicle’s roadworthi-
ness.
5.7
Adhere to the tyre pressures (including
the emergency spare wheel). The tyre
pressures should be checked at least
once a month and additionally before
any long journey (refer to the label
affixed to the edge of the driver’s door).
The pressures should be checked cold:
ignore higher pressures which may be
reached in hot weather or following a
high speed journey.
If the tyre pressures cannot be checked
when the tyres are , increase the
pressures from to bar (or ).
Depending on the vehicle, there may
be an adapter which needs to be
positioned on the valve before air is
added.
Refer to the information on “Changing a
wheel” in Section 5.
This practice is not recommended.
lead to abnormal tyre wear
and unusually hot running.
These are factors which
may seriously affect safety and lead
to:
– poor road holding,
– risk of bu rst ing or tread
separation.
The pressure depends on the load
and the speed of use. Adjust the
pressure according to the conditions
of use (refer to the label affixed to
the edge of the driver’s door).
Please be aware that a
poorly tightened or miss-
ing valve cap can make the
tyres less airtight and lead
to pressure loss.
Always use valve caps identical to
those fitted originally and tighten
them fully.
5.8
This type of equipment may only be
used for a limited period and as laid
down by local legislation. It is necessary
to observe the speed specified by
current legislation.
These tyres must, at a minimum, be
fitted to the two front wheels.
We recommend that these be fitted to
all four wheelers to ensure that your
vehicle remains maximum adhesion.
These tyres sometimes have a specific
direction of rotation and a maximum
speed index which may be lower than
the maximum speed of your vehicle.
For safety reasons, this op-
eration must be carried out
by a specialist.
Fitting different tyres may
change your vehicle as follows:
– it may mean that your vehicle
no longer conforms to current
regulations;
– it may change the way it handles
when cornering;
– it may cause the steering to be
heavy;
– It may affect the use of snow
chains.
to tyres which
are larger than those originally fitted to
the vehicle.
We would recommend that these be
fitted to all to ensure
that your vehicle retains maximum
adhesion.
: These tyres sometimes have
a specific direction of rotation and a
maximum speed index which may be
lower than the maximum speed of your
vehicle.
Snow chains may only be
fitted to tyres of the same
size as those originally
fitted to .
In all cases, we would recommend
that you contact an authorised
dealer who will be able to advise you
on the choice of equipment which is
most suitable for your vehicle.
As the tyre pressure moni-
tor may take several min-
utes to correctly determine
the positions of the wheels and the
pressure values after driving, check
the tyre pressures following any op-
eration.
5.9
Front lights-changine head lamP main BulB
– Follow the steps under BONNET
section to open the bonnet
– Remove the Electric harness
connector .1
– Remove the Dust cap from head
lamp bulb mounting area .2
– Release the lock spring .3
– Remove the head lamp main bulb
and replace the bulb with the new
one.
– Once the new lamp is fitted, follow
the steps vice-versa to assemble
other parts in lamp unit.Make sure
the Dust cap is re-fitted correctly.
DO NOT TOUCH BULB GLASS. HOLD
IT BY ITS BASE
The head lamp bulbs can be replaced.
However, we recommend you to have
them replaced with the approved dealer
if it proves difficult.
To comply with legislation or as a
precaution, you can obtain an
emergency kit from your approved
dealer containing a set of spare bulbs
and fuses.
The engine may be hot
during operations in close
proximity.In addition, the
engine cooling fan may
come on at any moment.
Risk of injury.
The bulbs are under
pressure and can break
when replaced.
Risk of injury.
5.11
5.12
1Empty location
2Left-hand main beam
headlight
3Right-hand main beam
headlight
4Left-hand dipped beam
headlight
5Right-hand dipped beam
headlight
6Left-hand side light
7Cluster /Radio/ Ultra low
cost/Amplifier
8First Row Accessory
Socket
9Blower Motor
10 Fuel Pump Fuse
11 Instrument panel-
Automatic transmission
12 Roof Light
13 Cluster
14 Low Beam
15
Radio/Ultra low cost/
Amplifier/Diagnostic
Socket, Roof Light
16 Empty location
17 Cluster
18 Lighting Switch
19 Electrical Door Locking
20 Electrical Door Locking
21 Electrical Door Locking
Empty Location
24
Cluster,Fuel pump Relay,
Injection Engine Control
Unit/Starter
25 Stop Light Switch, Radio/
Ultra Low cost
26 Rear Light Switch
27 Windshield Motor
28 Front Dual Window Lift
29 Power Steering
30 Air-Bag
31 Transponder Ring
32 to 35 Empty Location
36 Instrument panel/Starter-
Manual transmission
37 to 39 Empty Location
5.13
Insert a minus screw driver into the
slit of the Decor shell and twist it to
separate the Decor shell from the lower
part.
Replace battery according to the 2
direction marked on the cover.
Recommended battery: Contact
appro ved Re nau lt De ale r f or
replacement of the battery.
It is not advisable to touch the
electronic circuit in the key cover when
replacing the battery.
When refitting, ensure that the cover
is correctly clipped on and the screw
tightened.
The batteries are available from
approved Dealers, and their service
life approximately two years.
Check that there is no dye on the
battery: risk of an incorrect electrical
contact.
Do not throw away your used
batteries; give them to an organisation
responsible for collecting and recycling
batteries.
5.14
– Ensure that all electrical equipments
(courtesy lights, etc.) are switched off
before disconnecting or reconnecting
the battery;
– when charging, stop the charger
before connecting or disconnecting
the battery;
– to avoid creating a short circuit
between the terminals, do not place
metal objects on the battery;
– always wait at least one minute after
the engine has been switched off
before disconnecting a battery;
– make sure that you reconnect the
battery terminals after refitting.
Handle the battery with care
as it contains sulphuric acid,
which must not come into
contact with eyes or skin. If
it does, wash the affected area with
plenty of cold water and consult a
doctor, if necessary.
Ensure that naked flames, red hot
objects and sparks do not come into
contact with the battery as there is a
risk of explosion.
The engine may be hot when
carrying out operations in close
proximity. In addition, the engine
cooling fan can come on at any
moment.
Risk of injury.
Do not disconnect the battery
when the engine is running.
Some batteries may have
specific conditions for re-
charging. Consult your ap-
proved dealer. Avoid the
risk of sparks, as this could cause
a sudden explosion, and always
charge the battery in a well-venti-
lated area.
Risk of serious injury.
5.16
The steering wheel must be unlocked
and the ignition key must be in igni-
tion condition to provide brake
lights and hazard warning lights on the
towed vehicle. At night the vehicle must
have its lights on.
Do not remove the key from
the ignition when the vehi-
cle is being towed.
When the engine is
stopped, steering and braking as-
sistance are not operational.
– Do not leave the tools unsecured
inside the vehicle as they may come
loose under braking.
– A vehicle must not be towed if it is
not fit to be driven.
– Use a rigid towing bar. If a rope
or cable is used (where the law
allows this), the vehicle being
towed must be able to brake.
– A vehicle must not be towed if it is
not fit to be driven.
1
This towing point must only be used
for towing: never use it for lifting the
vehicle directly or indirectly.
Do not leave the tools unse-
cured inside the vehicle as
they may come loose under
braking.
It is prohibited to hang the
car to lower arm or Rear
Axle. To hang car there is a
specific place provided.
5.18
Warning lights dim or fail to come on;
the starter does not run.
Battery terminals disconnected,
oxidised or incorrectly secured.
Retighten them, reconnect them or clean
them if they are oxidised.
Battery discharged or worn. Connect another battery to the faulty
battery. Refer to the information on “Battery:
troubleshooting” in Section 5 or replace the
battery if necessary.
Do not push the vehicle if the steering
column is locked.
The engine is not starting. Starting conditions are not fulfilled. Please refer to the information on “Starting,
stopping the engine” in Section 2.
The steering column remains locked. Steering wheel locked. To unlock, gently move the key and the
steering wheel (refer to the information on
the “Ignition switch” in Section 2).
Traces of condensation in the lights. This is not a fault. Traces of
condensation are a natural
phenomenon caused by variations
in temperature. The traces will
disappear slowly once the lights
are switched on.
5.19
Vibrations. Tyres not inflated to correct
pressures, incorrectly balanced or
damaged.
Check the tyre pressures; if this is not the cause, have
their condition checked by an approved dealer.
Coolant boiling in the coolant
reservoir.
Mechanical fault: cylinder head
gasket damaged, faulty coolant
pump.
Stop the engine.
Contact an approved dealer.
Engine cooling fan not working. Contact an approved dealer.
Smoke under the bonnet. Short circuit or cooling system
leak.
Stop, switch off the ignition, move away from the
vehicle and contact an approved dealer.
The oil pressure warning light
comes on:
on a bend or under braking The engine oil level is too low. Top up the engine oil level (refer to the information on
“Engine oil level: topping up/filling” in Section 4).
at idle speed Low oil pressure. Go to your nearest approved dealer.
The oil pressure warning
light takes a long time to
go out or remains lit during
acceleration.
Loss of oil pressure. Stop the vehicle: contact an approved dealer.
Specyfikacje produktu
| Marka: | Renault |
| Kategoria: | Automatyczny |
| Model: | Kwid (2016) |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Renault Kwid (2016), zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Automatyczny Renault
24 Września 2024
16 Września 2024
11 Września 2024
6 Września 2024
31 Sierpnia 2024
30 Sierpnia 2024
30 Sierpnia 2024
30 Sierpnia 2024
29 Sierpnia 2024
29 Sierpnia 2024
Instrukcje Automatyczny
- Automatyczny Peugeot
- Automatyczny Citroën
- Automatyczny Pioneer
- Automatyczny Fiat
- Automatyczny Honda
- Automatyczny Audi
- Automatyczny Volkswagen
- Automatyczny Saab
- Automatyczny Toyota
- Automatyczny GEM
- Automatyczny Opel
- Automatyczny Kia
- Automatyczny Dacia
- Automatyczny Subaru
- Automatyczny Ford
- Automatyczny Tesla
- Automatyczny Seat
- Automatyczny BMW
- Automatyczny Mini
- Automatyczny Land Rover
- Automatyczny Mazda
- Automatyczny Skoda
- Automatyczny Vauxhall
- Automatyczny Chrysler
- Automatyczny Volvo
- Automatyczny Suzuki
- Automatyczny Genesis
- Automatyczny Hyundai
- Automatyczny VDL
- Automatyczny Mercury
- Automatyczny Smart
- Automatyczny Jeep
- Automatyczny Nissan
- Automatyczny GMC
- Automatyczny Polaris
- Automatyczny Mercedes-Benz
- Automatyczny Lexus
- Automatyczny MG
- Automatyczny Alfa Romeo
- Automatyczny Chevrolet
- Automatyczny Jaguar
- Automatyczny Maserati
- Automatyczny DS
- Automatyczny Mitsubishi
- Automatyczny Buick
- Automatyczny Audio-Technica
- Automatyczny RAM
- Automatyczny Rover
- Automatyczny Dodge
- Automatyczny Infiniti
- Automatyczny Lancia
- Automatyczny Tata
- Automatyczny Acura
- Automatyczny ACME
- Automatyczny Saturn
- Automatyczny Cadillac
- Automatyczny Pontiac
- Automatyczny Porsche
- Automatyczny Polestar
- Automatyczny Marklin
- Automatyczny Scion
- Automatyczny Aguilar
- Automatyczny Sharper Image
- Automatyczny Abarth
- Automatyczny Lincoln
- Automatyczny Mahindra
- Automatyczny Chery
- Automatyczny Lada
- Automatyczny Aston Martin
- Automatyczny McLaren
Najnowsze instrukcje dla Automatyczny
13 Marca 2025
10 Marca 2025
10 Marca 2025
10 Marca 2025
9 Marca 2025
9 Marca 2025
4 Marca 2025
4 Marca 2025
4 Marca 2025
4 Marca 2025