Instrukcja obsługi Really Right Stuff BH-55

Really Right Stuff statyw BH-55

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Really Right Stuff BH-55 (2 stron) w kategorii statyw. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
OPERATION
Attach the BH-55 to Tripod
1.
Tighten the Pan Lock Knob to lock the Panning Base with light to
medium torque.
2.
Screw the ballhead onto the 3/8”-16 threaded stud on the top of the
tripod (stud should not protrude more than 3/8” above platform or
5-6 threads). Tighten the ballhead onto the tripod snugly, but do not
over-torque or it will be diicult to remove.
Set Up Your Tripod
Set up your tripod to match the required camera position.
Orient the Ballhead
Loosen the Pan Lock Knob and rotate the body of the BH-55 ballhead as
shown, so you may operate the Main Lock Knob with your le hand while
your right hand is free to operate the camera controls. This orientation
allows you to easily tilt the camera body over from horizontal to vertical
using the drop notch.
1
2
Using the Drop Notch
1.
Loosen the Pan Lock Knob and rotate the body so one drop notch
is facing forward.
2. Fully seat camera into the drop notch.
Visit our website to see ballhead video tutorials.
® , ™, ©1990-2017 Really Right Stuff, LLC. All rights reserved.
As you adopt a procedure that works for you, it’s best to
practice that working mode consistently until it becomes
second nature. This will save you time in the field and help
avoid costly mistakes. Seasoned pros are able to setup
and shoot literally within seconds.
Adjust the Drag Set
Some photographers prefer to have tension (drag) on the ball
at all times to prevent the camera from suddenly flopping
when the Main Lock Knob is loosened. The optimal amount
of drag depends on the size and shape of equipment being
used as well as the angles at which you wish to place the
equipment (steeper angles require a higher drag setting).
To set the drag, either remove your camera or hold it in place.
1. Loosen the Main Lock Knob and Drag Set Knob by rotating them
in the direction of the Arrow (counterclockwise).opposite
2. Tighten the Main Lock Knob to your preferred amount of
resistance by turning in the same direction of the Arrow
and Lock symbol (clockwise).
3. Turn the Drag Set Knob in the direction of the Arrow
until it stops, then loosen the Main Lock Knob.
Your Drag is now set and will remain at the same
resistance until the Drag Set Knob is adjusted again.
Note: It is easy to forget that you set the drag and then
try to loosen the Main Lock Knob with no apparent
affect on the operation of the ball. If this happens to
you, please check the drag setting first and do not
over-loosen the Main Lock Knob.
MAINTENANCE
General Care
The BH-55 is finished with a protective anodize plating that protects the
aluminum from corrosion and mild abrasion. It will not protect it from
scraping against or dropping on rocks/concrete/etc.
The BH-55 comes packed in our protective LB-55 Cordura Pouch. Keep the BH-55
in this pouch whenever practical. When transporting your tripod, cover ballhead
with the pouch and tighten the drawstring around the bottom to keep it in place.
Cleaning
Take whatever precautions you can to prevent your BH-55 from getting
fouled in mud, dirt, or sand. A good habit is to keep a plastic bag with
your camera gear to quickly cover your camera and ballhead if you get
caught in a rain/sandstorm. If the BH-55 is fouled, dry dust and dirt can
be blown o and/or wiped o with a so cloth. Mud or salt water should
be lightly rinsed o with fresh water and then thoroughly dried. DO NOT
submerge the ballhead when washing and do not direct a high-pressure
stream of water at the ballhead.
All the knobs are captive, meaning they cannot come o without
damaging them so do not attempt to remove the knobs. If fine sand/
grit fouls the knob, simply run a gentle stream of water around the knob
while rotating it one-half turn back and forth.
Break-In
The ballhead is tuned to maximize holding capacity and deliver super-
fast lockup. If you like to work with a fully loose ball with no pre-set
tension, the ballhead is ideal for you “out of the box”. However, those who
like to operate the ballhead with a given amount of drag may find that
articulating a pre-tensioned ballhead is not as silky smooth as desired.
Keep in mind, aer using the head for a period of time there will be
some noticeable soening of the action. Customers have been known
to lubricate their ballhead for increased fluidity of motion, however we
do not recommend this.
Lubrication
The BH-55 is lubricated at the factory and parts that require lubrication
are sealed. NO LUBRICATION IS REQUIRED BY THE USER. Especially DO
NOT LUBRICATE THE BALL as this will decrease the lock-up capacity and
tend to attract dirt/dust. Just keep the ball free from contamination to
maintain smooth action.
BH-55 BALLHEAD
Thankyou
for choosing a Really Right Stu BH-55
Ballhead. It is the culmination of years of
development based on first-hand experience and abundant input from
seasoned professionals. Please review this manual to see how you can
get the most from your BH-55.
SPECIFICATIONS: BH-55 LR
Load Capacity 50 pounds (23kg) .................................................................
Ball Articulation ±40-45º, 2x90º ...................................................................
Tension Adjustment Independent ..............................................................
Panning Base 2.5º increments, ±0º-90º-0º ..................................................
Height (top of clamp jaw) 3.7” (94mm) ......................................................
Tripod Mount Stainless Steel 3/8”-16 .........................................................
Base Diameter 2.86” (72.6mm) ...................................................................
Ball Diameter 2.165” (55mm) ......................................................................
Weight 1.9lbs (861g) ....................................................................................
Clamp Options see our website for all clamp options ...............................
KEY FEATURES
1.
Pan Lock Knob — Our exclusive drum and band panning brake
is locked with one of the industry’s largest pan lock knobs. Crisply
knurled for superior lock up, you can easily apply enough clamping
force to unscrew the ballhead without the panning base slipping.
2.
55mm Ball —
The 55mm ball is hollow for reduced weight, and
easily handles heavy loads with ample lock-up. Its shape and finish
allow for smooth and precise movement.
3.
Drag Set Knob —
Use this knob to add tension on the ball and
prevent the camera from dropping when the Main Lock Knob is
loosened. Control is independent from the Main Lock Knob to ensure
logical operation and absolute reliability in the field.
4.
Quick-Release Clamps —
Really Right Stu quick-release clamps
feature the option of screw-knob or lever-release styles. We oer
many sizes, from mini clamps to extra long clamps. Though any of
our quick-release clamps may be installed, the B2 AS II and B2-Pro
II clamps are the best choices.
5.
Main Lock Knob —
Our snag-less, large diameter knob is designed
for comfort and easy locking of the ball.
6.
Dual Drop Notches — Two drop notches are spaced 90° apart,
positioned for flexibility when tilting the camera into vertical aspect
or at steep downward or upward angles.
7. Body — The CNC machined body serves as both the structure and
the clamping mechanism of the ballhead. This is furnished by a
unique split body design, which is robust, lightweight and sealed to
prevent dust contamination. Finished with satin black anodizing,
it can withstand abrasion and corrosion while looking beautiful.
8.
Engraved Pan Base — The pan base is laser engraved in 2.5º
increments from ±0º-90º-0º. Located on the main body just below
the drop notch is an index mark for tracking progressive panning,
used in multi-shot panoramic photography.
BH-55 LR
Pictured
5
8
4
1
2
7
6
3
GUARANTEE
All Really Right Stu brand products are guaranteed to
the original purchaser to be free of defects in materials or
workmanship for five (5) years from the date of purchase.
Products will be repaired or replaced at our option.
1146 Farmhouse Lane, San Luis Obispo, CA 93401 USA
1-805-528-6321 | 1-888-777-5557
www.ReallyRightStu.com

Specyfikacje produktu

Marka: Really Right Stuff
Kategoria: statyw
Model: BH-55

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Really Right Stuff BH-55, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje statyw Really Right Stuff

Really Right Stuff

Really Right Stuff BH-40 Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff BH-55 Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff BH-25 Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff BH-30 Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff BPC-16 Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff B2-40-LR Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff B2-LR II Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff TVC-34 Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff PC-LR Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff TVC-24 Instrukcja

11 Grudnia 2024

Instrukcje statyw

Najnowsze instrukcje dla statyw

Magnus

Magnus VPH-10P Instrukcja

11 Grudnia 2024
Magnus

Magnus REX DSF-132 Instrukcja

11 Grudnia 2024
REVO

REVO AC-GRB Instrukcja

11 Grudnia 2024
REVO

REVO AC-MUSIC Instrukcja

11 Grudnia 2024
MOZA

MOZA AirCross S Instrukcja

11 Grudnia 2024
DJI

DJI Ronin 3D Focus System Instrukcja

11 Grudnia 2024
Cartoni

Cartoni Focus 10 Instrukcja

11 Grudnia 2024
Cartoni

Cartoni Master 40 Instrukcja

11 Grudnia 2024
Cartoni

Cartoni Master 30 Instrukcja

11 Grudnia 2024
Cartoni

Cartoni Magnum Instrukcja

11 Grudnia 2024