Instrukcja obsługi RCF TT08-A

RCF głośnik TT08-A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RCF TT08-A (12 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
TT08-A
PRECISION MONITOR
“HIGH OUTPUT AT PREMIUM SOUND QUALITY”
We started the design of our TT+ compact speakers with a clear idea in
mind: maximum high quality audio SPL in the smallest weight and size.
Thanks to our state of the art neodymium transducers, premium quality
analog processing and powerful class D ampliers we reached and
surpassed our original goals.
IMPORTANT NOTES
Before connecting and using the amplier, please read this instruction manual carefully and keep it on hand for
future reference. The manual is to be considered an integral part of the product and must accompany the amplier
when it changes ownership as a reference for correct installation and use as well as for the safety precautions.
RCF Spa. will not assume any responsibility for the incorrect installation and/or use of the product. IANO
WARNING: To prevent the risk of re or electric shock, never expose this equipment to rain or humidity.
SAFETY PRECAUTIONS
1. All the precautions, in particular the safety ones, must be read with special attention, as they provide important
information.
2. The power supply voltage of this equipment is suiciently high to involve a risk of electrocution; therefore, never
install or connect the product with the power supply switched on.
3. Before powering up the amplier, make sure that all the connections have been made correctly and that the
voltage of your power mains corresponds to the voltage shown on the rating plate on the unit; if it does not, please
contact your RCF dealer.
4. The metallic parts of the unit are earthed by means of the power cable. In the event that the current outlet used
for power does not provide the earth connection, contact a qualied electrician to earth the equipment using the
dedicated termina l.
5. To protect the power cable from damage, make sure that it is positioned so that it cannot be stepped on or
crushed by objects.
6. To prevent the risk of electric shock, never open the amplier. There are no parts on the inside that the user
needs to access.
7. Make sure that no objects or liquids can get into the amplier, as this may cause a short circuit.
8. Never attempt to carry out any operations, modications, or repairs that are not expressly described in this
manual.
Contact your authorized service centre or qualied personnel should any of the following occur:
- the amplier does not function (or functions in an anomalous way);
- the power supply cable has been damaged;
- objects or liquids have got into the unit;
- the amplier has been subject to heavy impact.
9. When the amplier is not to be used for long periods of time, switch it o and disconnect the power cable.
10. If the amplier begins to emit any strange odours or smoke, switch it o immediately and disconnect the power
supply cable.
11. Do not connect this product to any equipment or accessories not specied.
For suspended installation, only use the dedicated anchoring points and do not try to hang this product using
HANDLES or elements that are unsuitable or not specic for this purpose.
Also check the suitability of the support surface to which the product is anchored (wall, ceiling, structure, etc.), and
the components used for attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must
guarantee the security of the system/installation over time, also considering, for example, the mechanical vibrations
normally generated by the transducer.
To prevent the risk of falling equipment, do not stack multiple units of this product unless this possibility is specified
in the instruction manual.
12. RCF Spa. strongly recommends this product is installed by professional qualied installers (or specialised
rms) who can ensure correct installation and certify it according to the regulations in force.
The entire audio system must comply with the current standards and regulations regarding electrical systems.
13. Supports and trolleys
The equipment should only be used on trolleys or supports, where necessary, that are recommended by the
manufacturer. The equipment/support/trolley assembly must be moved with extreme caution. Sudden stops,
excessive pushing force and uneven oors may cause the assembly to overturn.
14. There are numerous mechanical and electrical factors to be considered when installing a professional audio
system (in addition to those which are strictly acoustic, such as sound pressure, angles of coverage, frequency
response, etc.).
15. Hearing loss
Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level that leads to hearing
loss is dierent from person to person and depends on the duration of exposure. To prevent potentially dangerous
exposure to high levels of acoustic pressure, anyone who is exposed to these levels should use adequate
protection devices. When a transducer capable of producing high sound levels is being used, it is therefore
necessary to wear ear plugs or protective earphones.
See the technical specications in the instruction manual for the maximum sound pressure the loudspeaker is
capable of producing
IMPORTANT NOTES
To prevent the occurrence of noise on the cables that carry microphone signals or line signals (for example, 0 dB),
only use screened cables and avoid running them in the vicinity of:
- equipment that produces high-intensity electromagnetic fields (for example, high power transformers);
- mains cables;
- lines that supply loudspeakers.
OPERATING PRECAUTIONS
- Do not obstruct the ventilation grilles of the unit. Situate this product far from any heat sources and always
ensure adequate air circulation around the ventilation grilles.
- Do not overload this product for extended periods of time.
- Never force the control elements (keys, knobs, etc. ).
- Do not use solvents, alcohol, benzene or other volatile substances for cleaning the external parts of this
product.

Specyfikacje produktu

Marka: RCF
Kategoria: głośnik
Model: TT08-A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RCF TT08-A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik RCF

RCF

RCF MR 40 Instrukcja

13 Października 2024
RCF

RCF C3108-126 Instrukcja

7 Października 2024
RCF

RCF NX 945-A Instrukcja

4 Października 2024
RCF

RCF C3110-96 Instrukcja

28 Września 2024
RCF

RCF S 5012 Instrukcja

23 Września 2024
RCF

RCF ART 935-A Instrukcja

17 Września 2024
RCF

RCF NXL 44-A MK2 Instrukcja

17 Września 2024
RCF

RCF Compact M 04 Instrukcja

16 Września 2024
RCF

RCF P 3108 Instrukcja

13 Września 2024
RCF

RCF BS 8 Instrukcja

11 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024