Instrukcja obsługi RC4WD Z-E0106

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RC4WD Z-E0106 (1 stron) w kategorii Batterij-oplader. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Battery Charging
Input Voltage
Output Current
Charging Model
Charging Capability
100VAC~240VAC
650MA
pre-charged, steady current,
monitoring, automatic protection
5-8 NiMH batteries
SPECIFICATIONS
WARNING
The charger can get hot during use. Use the charger in a well ventilated area, away from people and electrically conductive
or inflammable materials.
If the battery has suspicious reactions during the charge or discharge, such as overheating, venting or leaking, immediately
disconnect the battery and store it in a safe location, away from people and inflammable materials.
This charger is designed to charge only 5~8 Cell NiMH batteries.
Make sure that the battery is compatible with the charger’s charge
rate.
Never let children operate unsupervised while charger is in use.
Adult supervision is recommended at all times.
The charger is for indoor use only. Do not use in case of high humidity
conditions or condensation.
Do not attempt to open or modify the charger’s case.
Do not let objects or liquids penetrate the charger’s cooling vents.
1. Charge only batteries that are cool to the touch and are not
damaged (swollen, bent, broken or punctured).
2. Connect the charger to the proper wall receptacle noting
proper polarity.
3. Plug the battery’s connector into the charger’s connector.
The LED will light red as it is charging.
4. The charger will emit a tone and the LED will change to
green once fully charged. NOTE: Monitor the battery during
the charge and end the charging process if the charger or
battery becomes very hot.
5. Always unplug the battery from the charger immediately
upon completion of charging.
CAUTION: Overcharging a battery can cause a fire.
RC4WD Universal NIMH Peak
Battery Charger Instructions
CAUTION Please read these instructions
carefully prior to using!
100-0072

Specyfikacje produktu

Marka: RC4WD
Kategoria: Batterij-oplader
Model: Z-E0106

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RC4WD Z-E0106, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Batterij-oplader RC4WD

RC4WD

RC4WD Z-E0106 Instrukcja

2 Października 2024

Instrukcje Batterij-oplader

Najnowsze instrukcje dla Batterij-oplader

MSW

MSW S-CHARGER-20A.2 Instrukcja

15 Października 2024
MSW

MSW S-CHARGER-10A.2 Instrukcja

15 Października 2024
Gembird

Gembird CHM-03 Instrukcja

10 Października 2024
Kostal

Kostal IQ 8.5 Instrukcja

9 Października 2024
Venom

Venom VS5007 Instrukcja

9 Października 2024
Venom

Venom VS5010 Instrukcja

9 Października 2024
Venom

Venom VS2891 Instrukcja

9 Października 2024
Venom

Venom VS2881 Instrukcja

9 Października 2024
Venom

Venom VS2883 Instrukcja

9 Października 2024
Venom

Venom VS2870 Instrukcja

9 Października 2024