Instrukcja obsługi RadioShack PRO-2048 - 200 Channel

RadioShack skaner PRO-2048 - 200 Channel

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RadioShack PRO-2048 - 200 Channel (44 stron) w kategorii skaner. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/44
Owner’s Manual Cat. No. 20-417
PRO-2048 200-Channel
Programmable Home Scanner
Please read before using this equipment.
20-417.fm Page 1 Wednesday, August 4, 1999 11:33 AM
2
FEATURES
Selectable Scan/Search Speeds
— let you select normal or Hyper
Scan speeds, and normal, high, or
HyperSearch speeds.
H
y
perScan — scans 50 channels
per second.
H
y
perSearch — searches through
frequencies at 300 steps per second
in bands that have 5 kHz steps to
help you find interesting broadcasts.
Ten 20-Channel Stora
g
e Banks
let you store 20 channels in each of
10 banks to group frequencies so
you can easily identify calls.
Ten Priorit
y
Channels — let you set
the scanner to check up to 10 chan-
nels every 2 seconds so you do not
miss important calls.
Data Si
g
nal Skip lets you set the
scanner to skip non-modulated sig-
nals or data signals during a limit or
direct search so it can automatically
continue searching.
Monitor Memorieslet you store
up to 10 frequencies you locate dur-
ing a frequency search which you
can then transfer into channels.
Search Skip — lets you select up to
20 frequencies for the scanner to
skip during a limit or direct search, so
you can avoid unwanted frequencies
such as those with a continuous
transmission.
© 1997 Tandy Corporation.
All Rights Reserved.
HyperScan and HyperSearch are trademarks and RadioShack
is a registered trademark used by Tandy Corporation.
Your RadioShack PRO-2048 200-
Channel Programmable Home Scan-
ner lets you in on all the action! This
scanner gives you direct access to
over 30,000 exciting frequencies that
include police and fire departments,
ambulance and transportation ser-
vices, and amateur radio. You can
select up to 200 channels to scan,
and you can change your selections
at any time.
The secret to your scanner’s ability to
scan so many frequencies is its cus-
tom-designed microprocessor — a ti-
ny, built-in computer.
Your scanner also has these fea-
tures:
Manual or Scan Channel Select
lets you manually specify a single
channel or set the scanner to auto-
matically scan all the stored chan-
nels.
Triple Conversion Superhetero-
d
y
ne Receiver — virtually elimi-
nates any interference from
intermediate frequency (IF) images,
so you hear only the frequency you
select.
Search Function searches for
new and unlisted frequencies using a
designated frequency range (limit
search) or starting from a specified
frequency (direct search).
20-417.fm Page 2 Wednesday, August 4, 1999 11:33 AM
3
Adjustable Tone — lets you turn on
or off the beep you hear when you
press a key.
Two-Second Scan Delay delays
scanning for 2 seconds before mov-
ing to another channel, so you can
hear more replies.
Weather Band Key — scans the
preprogrammed weather frequen-
cies so you can stay informed about
current weather conditions.
Memory Backup keeps the chan-
nel frequencies stored in your scan-
ner’s memory for up to 3 days during
a power loss.
Squelch Control — lets you adjust
the receiver’s sensitivity low enough
to receive weak signals or high
enough to eliminate receiver noise
when not receiving a signal.
Lock-Out Function — prevents
channels you select from being
scanned.
Backlit Liquid Crystal Display
lets you easily see the indicators on
the scanner’s display, even at night.
Audio Output Jack — lets you con-
nect an earphone or headphones for
private listening, or an external
speaker for listening in a remote or
noisy area.
Optional Antenna Terminals — let
you connect the supplied telescoping
antenna to the screw-in terminal, or
an external antenna to the BNC con-
nector.
Optional Power Sources — you
can power your scanner using the
supplied AC adapter or an optional
DC cigarette-lighter power cable.
Warning: To prevent fire or shock
hazard, do not expose this system
to rain or moisture.
This symbol is intended to alert
you to the presence of uninsulat-
ed dangerous voltage within the
scanner’s enclosure that might be
of sufficient magnitude to consti-
tute a risk of electric shock. Do not
open the scanner’s case.
This symbol is intended to inform
you that important operating and
maintenance instructions are in-
cluded in the literature accompa-
nying this scanner.
We recommend you record your
scanner’s serial number here. The
number is on the back panel.
Serial Number: ________________
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
CAUTION
!
!
20-417.fm Page 3 Wednesday, August 4, 1999 11:33 AM

Specyfikacje produktu

Marka: RadioShack
Kategoria: skaner
Model: PRO-2048 - 200 Channel

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RadioShack PRO-2048 - 200 Channel, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje skaner RadioShack

Instrukcje skaner

Najnowsze instrukcje dla skaner

Medion

Medion MD 90090 Instrukcja

9 Października 2024
Medion

Medion MD 90009 Instrukcja

9 Października 2024
Ricoh

Ricoh fi-70F Instrukcja

8 Października 2024
Reflecta

Reflecta x44-Scan Instrukcja

8 Października 2024
Plustek

Plustek eScan A280 Instrukcja

7 Października 2024
Kogan

Kogan KA16PFSCNA Instrukcja

7 Października 2024
Kodak

Kodak Sidekick 1400U Instrukcja

6 Października 2024
Microtek

Microtek Scanmaker i800 Instrukcja

4 Października 2024