Instrukcja obsługi QTX ZEPHYR


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX ZEPHYR (6 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
ZEPHYR
Compact Haze Machine
Item ref: 160.494UK
User Manual
Version 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Powered by TCPDF (www.tcpdf.org)
160.494UK User Manual
Introduction
Thank you for purchasing the ZEPHYR compact haze machine. This product has been designed
to provide controlled haze effects for stage productions and themed events. Please read and
keep this manual in order to achieve the best results from this equipment and avoid damage
through misuse.
Unpacking
The product should arrive with you in good condition with the following components.
ZEPHYR haze machine
Wireless remote control & keyfob
Mains lead(s)
If you find any accessory is missing or the machine has arrived with any problems,
please contact your local dealer at once. Please keep the original package and
invoice for any possible replacement or returned demand.
Warning
To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on areas other than inside the fluid tank, disconnect the mains, allow the
ZEPHYR to dry out and have it checked by qualified personnel before further use.
Avoid any impact, dropping or extreme pressure to the housing.
No user serviceable parts inside - do not open the case.
Allow the ZEPHYR to acclimatize to room temperature before operating.
Placement
The ZEPHYR has a built-in fluid container and should be operated in an upright position.
Ensure that the ZEPHYR is positioned on a stable, non-slip surface.
Safety
Check for correct mains voltage and condition of IEC lead before connecting to mains
This unit must be earthed
This unit uses a heating element be aware that parts of the housing may be hot in use!
Cleaning
Use a soft dry or slightly damp to clean the casing
Do not use strong solvents for cleaning the housing
Clean the haze mechanism periodically by operating with distilled water instead of haze
It is also recommended to use fog machine cleaning fluid (160.670UK) periodically
160.494UK User Manual
Recommended fluid
For the ZEPHYR haze machine, we strongly recommend the following fluid which has
been specifically formulated to perform best with any heater based haze machines.
QTX ref code
Description
160.591UK
High quality professional haze fluid
160.596UK
Eco haze fluid
Use power supply with Earth connection and adequate current capacity for the unit
Use the plug to connect to the main power supply as follows:
Wire
Connection
International signal
Brown
Live
L
Blue
Neutral
N
Yellow /Cyan
Earth
Rear panel
1
LED display
2
4 button control panel
3
RF remote receiver connection (5-pin DIN)
4
DMX input (3-pin XLR)
5
DMX output (3-pin XLR)
6
IEC mains inlet & fuse holder


Specyfikacje produktu

Marka: QTX
Kategoria: Maszyna efektów
Model: ZEPHYR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX ZEPHYR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna efektów QTX

QTX

QTX SpheroSmoke-400 Instrukcja

27 Września 2024
QTX

QTX MoonCloud-400 Instrukcja

27 Września 2024
QTX

QTX STRATUS-1200 Instrukcja

16 Września 2024
QTX

QTX HZ-1500LED Instrukcja

5 Września 2024
QTX

QTX HAZYR-PRO Instrukcja

25 Sierpnia 2024
QTX

QTX QTFX-B3 Instrukcja

24 Sierpnia 2024
QTX

QTX FLARE-1000 Instrukcja

23 Sierpnia 2024
QTX

QTX HZ-800 Instrukcja

20 Sierpnia 2024
QTX

QTX Bubble-Box Instrukcja

19 Sierpnia 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów