Instrukcja obsługi QTX HZ-1500LED

QTX Maszyna efektów HZ-1500LED

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX HZ-1500LED (5 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
www.avsl.com 160.495UK Manual
HZ-1500LED
LED HAZE MACHINE 1500W
Order ref: 160.495UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
A high efficiency 1500W haze machine capable of producing ,000 cu.ft per minute of haze 20
to rapidly fill larger venues. The haze effect can then be highlighted with an array of colours
from the 9 bright LED's housed in the front of the unit. The haze and light effects are easily
controlled using either the included keyfob-style RF wireless remote or by 6-channel DMX
connection. The 2.3 litre fluid bottle can be removed for easy refilling and there is a slot
window to indicate the current fluid level.
• 1500W haze vaporizer with around ,000 cu.ft/min output 20
• Nine powerful 3W LEDs add a bright colourful light show to the haze effect
• 433Mhz keyfob-style RF wireless remote
• 6-Channel DMX connections
• Removable 2.3 litre fluid tank
• High grade haze fluid should be used with this machine (we recommend 160.591UK)
www.avsl.com 160.495UK Manual
I the box: n
Please check the contents to ensure that the product has been received in good condition.
• HZ-1500LED Haze Machine
• RF Remote Control & transmitter
• UK/EU Mains Leads
• Mounting bracket & screws
• User guide
If you find any accessory is missing or the machine has arrived with damage, please contact
your local dealer at once. Do not try to fix this item yourself or you will invalidate the
warranty. Please keep the original packaging and invoice for any possible replacement or
return demands.
Warnings:
1. To prevent risk of fire or electric shock, do not expose electrical parts to rain or
moisture.
2. If liquids are spilled on areas other than inside the fluid tank, disconnect the mains,
allow the unit to dry out and have it checked by qualified personnel before use.
3. Avoid any impact, dropping or extreme pressure to the housing .
4. No user serviceable parts inside - do not open the case.
5. Allow the unit to acclimatise to room temperature before operating.
6. The -1500LED has a bui -in fluid container and should be operated in an upright HZ lt
position. Ensure that the unit is positioned on a stable, non-slip surface.
Safety and Cleaning:
1. Check for correct mains voltage and condition of IEC lead before connecting to mains.
2. This unit must be earthed.
3. This unit uses a heating elemen be aware that parts of the housing may be hot t –
during use!
4. Use a soft dry or slightly damp cloth to clean the casing.
5. Do not use strong solvents for cleaning the housing.
6. Clean the haze mechanism periodically by operating with distilled water.
7. It is also recommended to use fog machine cleaning fluid (160.670UK) periodically.
Recommended Fluids:
For the - LED haze machine, we strongly recommend the following fluid which has HZ 1500
been specifically formulated to perform best with any heater-based haze machines.
QTX ref code
Description
Size
160.591UK
High quality professional haze fluid
5 Litre
160.596UK
Eco haze fluid
5 Litre
www.avsl.com 160.495UK Manual
R Panel: ear
Setting U p:
1. Unpack the HZ-1500LED unit.
2. Unscrew the top cap of the tank and remove to fill with haze flui d.
3. Replace the bottle and screw the cap securely, making sure that the pipe is fed down
to the bottom of the bottle to ensure a consistent flow of fluid.
4. Connect the remote transmitter to the sock marked Wireless on the rear panel. RF et “ ”
5. If DMX is to be used for control, connect the DMX signal from the controller to the
DMX IN XLR connector. Any further DMX controlled units may be connected via the
DMX OUT XLR connector.
6. Connect the IEC mains plug and power the unit on.
7. The it will begin the warming up proce which normally takes around 3-5 nutes. un ss mi
Operation:
Use the control buttons on the rear panel of the unit to operate the unit s modes and functions ’
quickly and efficiently as below:
Button
Response
Menu
Scrolls between DMX and LED modes
Up
Increase function or setting
Down
Decrease function or setting
Enter
Enter mode select

Specyfikacje produktu

Marka: QTX
Kategoria: Maszyna efektów
Model: HZ-1500LED

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX HZ-1500LED, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna efektów QTX

QTX

QTX SpheroSmoke-400 Instrukcja

27 Września 2024
QTX

QTX MoonCloud-400 Instrukcja

27 Września 2024
QTX

QTX STRATUS-1200 Instrukcja

16 Września 2024
QTX

QTX HZ-1500LED Instrukcja

5 Września 2024
QTX

QTX HAZYR-PRO Instrukcja

25 Sierpnia 2024
QTX

QTX QTFX-B3 Instrukcja

24 Sierpnia 2024
QTX

QTX FLARE-1000 Instrukcja

23 Sierpnia 2024
QTX

QTX HZ-800 Instrukcja

20 Sierpnia 2024
QTX

QTX Bubble-Box Instrukcja

19 Sierpnia 2024
QTX

QTX QTFX-2000 mkII Instrukcja

19 Sierpnia 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów

BeamZ

BeamZ PS6W 151.262 Instrukcja

14 Stycznia 2025
BeamZ

BeamZ S553L Instrukcja

5 Stycznia 2025
Audibax

Audibax Smoke 500 Instrukcja

5 Stycznia 2025
Audibax

Audibax Haze 1200 Instrukcja

5 Stycznia 2025
Audibax

Audibax Smoke 1500 Instrukcja

5 Stycznia 2025
Audibax

Audibax VOLCANO 1500 RGBW Instrukcja

5 Stycznia 2025
Audibax

Audibax Spark 600 Instrukcja

5 Stycznia 2025
Audibax

Audibax Smoke 700 LED Instrukcja

5 Stycznia 2025
Audibax

Audibax Smoke 1200 Instrukcja

5 Stycznia 2025
Audibax

Audibax Geyser 2000 Instrukcja

5 Stycznia 2025