Instrukcja obsługi QTX QTFX-LBF1

QTX Maszyna efektów QTFX-LBF1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX QTFX-LBF1 (6 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
www.avsl.com 160.555UK Manual
QTFX- F1 LB
LED BUBBLE FOG MACHINE 900W
Order ref: 160. 5UK 55
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
A high output effects machine that combines high density bubbles with a powerful fogger, to
produce a stunning smoke-filled bubble experience. The 12 bright LEDs on the front of the
unit can be used to highlight the torrent of bubbles, producing an exciting and colourful effect
that's ideal for parties and events. The unit itself is made from hardwearing steel, which
encases three fans for optimum air flow. It also comes complete with a fully functional wired
controller and smaller RF remote for simple wire-free operation and is DMX compatible for
more precise control.
• 900W Fogger produces up to 5000cuft/min
• High output bubble machine with 10 wands
• 12 Bright 1W RGB LED's housed in the front panel
• Wired Controller with button control and LCD display
• 10 Channel DMX compatible for more precise control
• 433Mhz keyfob-style RF wireless remote
• 1.2 Litre removeable fluid tank for fog machine
• Quick drain tap at rear for bubble fluid
• 3 fans (1 front, 2 rear) for optimum air flow
www.avsl.com 160.555UK Manual
Please check the contents to ensure that the product has been received in good condition.
• QTFX-LBF1 LED Bubble Fogger
• Wired remote control
• RF Remote Control
• UK/EU Mains Leads
• Mounting bracket & screws
• User guide
If you find any accessory is missing or the machine has arrived with damage, please contact
your local dealer at once. Do not try to fix this item yourself or you will invalidate the
warranty. Please keep the original packaging and invoice for any possible replacement or
return demands.
1. To prevent risk of fire or electric shock, do not expose electrical parts to rain or
moisture.
2. If liquids are spilled on areas other than inside the fluid tanks, disconnect the mains,
allow the unit to dry out and have it chec d by qualified personnel before use. ke
3. Avoid any impact, dropping or extreme pressure to the housing .
4. No user serviceable parts inside - do not open the case.
5. Allow the unit to acclimatise to room temperature before operating.
6. The QTFX-LBF1 has bui - fluid container and should be operated in an upright a lt in
position. Ensure that the unit is positioned on a stable, non-slip surface.
1. Check for correct mains voltage and condition of IEC lead before connecting to mains.
2. This unit must be earthed.
3. This unit uses a heating elemen be aware that parts of the housing may be hot t –
during use!
4. Use a soft dry or slightly damp cloth to clean the casing.
5. Do not use strong solvents for cleaning the housing.
6. Clean the g mechanism periodically by operating with distilled water. fo
7. It is also recommended to use fog machine cleaning fluid (160.670UK) periodically.
The QTFX-LBF1 requires both fog fluid in the fluid tank and bubble fluid in the reservoir. For
the efficien use of this unit we recommend the following QTX fluids: t
160.5 UK 89
Premium fog fluid clear
5 Litre
160.575UK
Bubble fluid
5 Litre
www.avsl.com 160.555UK Manual
R Panel: ear
Setting U p:
1. Unpack the QTFX-LBF1 unit.
2. Unscrew the top cap of the fluid tank and remove to fill with fog flui d.
3. Replace the bottle and screw the cap securely, making sure that the pipe is fed down
t the bottom of the bottle to ensure a consistent flow of fluid. o
4. Carefully fill the bubble reservoir with bubble fluid, taking care not to overfill it but
ensuring there is sufficient fluid to cover the wands.
5. Connect the wired remote to the sock marked REMOTE on the rear panel. et “ ”
6. Connect the IEC mains plug and power the unit on.
7. The it will begin the warming up proce which normally takes around 3-5 nutes. un ss mi
8. After use, remember to empty the haze fluid tank and bubble reservoir by removing
the water out t plug on the back of the unit. le
Operation: Wired remote
FUNC: Press to scroll through the menu options (see below
table).
TIMER: Press to set up fog timer
UP: Press to increase the current menu value
START/STOP: Press to start and stop continuous g option fo
DOWN: Press to decrease current menu val ue

Specyfikacje produktu

Marka: QTX
Kategoria: Maszyna efektów
Model: QTFX-LBF1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX QTFX-LBF1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna efektów QTX

QTX

QTX SpheroSmoke-400 Instrukcja

27 Września 2024
QTX

QTX MoonCloud-400 Instrukcja

27 Września 2024
QTX

QTX STRATUS-1200 Instrukcja

16 Września 2024
QTX

QTX QTFX-B4 Instrukcja

5 Lipca 2024
QTX

QTX QTFX-400 Instrukcja

5 Lipca 2024
QTX

QTX QTFX-LBF1 Instrukcja

4 Lipca 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów

Velleman

Velleman vdl660rl Instrukcja

10 Października 2024
Valcom

Valcom V-5580041A Instrukcja

8 Października 2024
Magmatic

Magmatic Magma Fog 1500IP-II Instrukcja

8 Października 2024
Magmatic

Magmatic PMDMX1 Instrukcja

8 Października 2024
Magmatic

Magmatic CRISP Instrukcja

8 Października 2024
Magmatic

Magmatic CRISP MAX Instrukcja

8 Października 2024
Magmatic

Magmatic SIDEWINDER Instrukcja

8 Października 2024
Magmatic

Magmatic JAVELIN Instrukcja

8 Października 2024
Magmatic

Magmatic MAGMA FOG 1500 IP Instrukcja

8 Października 2024
BeamZ

BeamZ BLAZE3500 Instrukcja

8 Października 2024