Instrukcja obsługi QTX QTFX-400

QTX Effect machine QTFX-400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX QTFX-400 (5 stron) w kategorii Effect machine. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
www.avsl.com 160.461 User Manual
QTFX-4 00
Compact Fog Machine
Item ref: 160.461 UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
www.avsl.com 160.461 User Manual
Introduction
Thank you for choosing the QTFX-400 compact fog machine as part of your stage effects
system. This product is designed to offer professional quality performance in a neat and
manageable format.
Please read these instructions in full to gain the best results from this item and avoid damage
to the unit through misuse.
Unpacking
Your QTFX-400 should reach you in good condition and should be supplied with IEC mains
lead(s), mounting bracket and a wired handheld remote control.
If there are any signs of damage or items missing from the packaging, contact your dealer
immediately.
Warning
To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on the housing or through the vents, disconnect the mains, allow the
QTFX- to dry out and have checked by qualified personnel before further use. 400 it
Avoid any impact, dropping or extreme pressure to the housing.
No user serviceable parts inside - do not open the case.
Allow the QTFX-400 to acclimatize to room temperature before operating.
Refer all servicing to qualified service personnel.
Placement
The QTFX-400 has a built-in fluid tank and should be operated in an upright position.
If free-standing, ensure that the QTFX-400 is positioned on a stable, non-slip surface.
If mounted at height, use the integral bracket and it is advisable to add a safety cable.
Safety
Check for correct voltage and condition of IEC lead before connecting to power outlet
Check the condition of the remote lead and ensure that it is not trapped
This unit must be earthed
This unit uses a heating element - do not touch the nozzle area whilst in use!
Cleaning
Use a soft dry or slightly damp to clean the casing
Do not use strong solvents for cleaning the unit
It is recommended to use fog machine cleaning fluid (160.670UK) periodically
www.avsl.com 160.461 User Manual
Rear Panel
Setting up
The QTFX-400 requires fog fluid to produce the effect.
It is recommended to use one of the range of qtx fog fluids for best results.
A chart for recommended fog fluids is included further along in this document
Unscrew the top cap of the tank and remove to fill with the selected fog fluid
Replace the cap and close securely, ensuring the pipe is fed down to the bottom of the
bottle so a consistent flow of fluid is supplied to the machine
Connect the supplied remote control to the female IEC on the rear panel
Connect the IEC mains plug
Operation
Check the fog fluid level indicator at the rear and fill if necessary
Switch the mains power on
Heat up time is usually between 3-4 minutes. Please ensure that the remote button is
not pressed during the heat up time.
When the machine is ready to operate, the light on the remote control will illuminate.
You may now press the button for fog on demand
When the remote control light is off, the QTFX-400 needs time to re-heat. Do not
attempt to produce fog until the light is lit.
During prolonged use, periodically check that the fluid level is not empty
Switch off when not in use. Unplug from mains if not in use for long periods
1
Remote control connection
(IEC female)
2
Mains power on/off
rocker switch
3
Fog fluid fill level indication
4
Mains inlet (IEC male)
and fuse holder

Specyfikacje produktu

Marka: QTX
Kategoria: Effect machine
Model: QTFX-400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX QTFX-400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą