Instrukcja obsługi QTX BC5A

QTX system hi-fi BC5A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QTX BC5A (14 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
BC5A / BC6A
ACTIVE STEREO SPEAKER SET
Order ref: 170.164UK, 170.165 , 170.166UK, 170.168UK, 170.169UK UK
User Manual
Active + satellite stereo pair
Supplied with adjustable wall brackets
Supplied with satellite link cable
RCA or 3.5mm stereo inputs
BC5A BC6A User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing the BC-series active speaker set. Please read this manual prior to use to avoid
damage to the item. These compact, self-contained stereo speaker sets are designed to deliver high quality
near-field or perimeter coverage for various monitoring and installed sound applications
Contents
Please take care when unpacking this product. Inspect for any damage and ensure you have the following
components…
BC-series active speaker with built-in amplifier
BC-series passive satellite speaker
2 x wall-mounting brackets with screw caps
Satellite speaker wire modular connector –
Mains lead(s)
Safety Conventions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To prevent electric shock do not remove the rear cover.
No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety
Prior to connecting the dc adaptor to mains, ensure that the supply voltage is correct.
Avoid ingress of water or particles into the enclosure.
Placement
Keep the unit out of direct sunlight and away from heat sources.
Keep the unit away from moisture or dusty environments.
Allow adequate space for cooling at the rear of the active speaker unit
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. Do not use solvents.
BC5A BC6A User Manual
Panel layout
(example shown is BC5A)
Setting up
For near-field or desktop use, space speakers apart for adequate stereo separation depending on
proximity to the listener. For installations using the supplied wall-mount brackets, attach the brackets
to a solid surface using fixings which are sufficient to hold the weight of the active speaker. Take
care to mount the active unit close enough to a mains outlet for the supplied adaptor to reach.
Fix the speaker units to the brackets at top and bottom using the supplied screw caps. Each can be
rotated to aim the general direction of sound output.
If the speakers are mounted at height or where falling objects may be hazardous, it is advised to
attach a secondary means of support (e.g. drop-wire or chain)
Operation
Link the powered speaker to the satellite using the supplied modular connector speaker lead (5)
With the rotary VOLUME (4) control set to minimum and TREBLE and BASS controls set to the
vertical (12 o’clock) position, connect the supplied mains lead to the rear of the active unit (2) and
plug into a suitable mains outlet. Connect the source signal into the active unit via either L+R RCA
connectors or 3.5mm stereo jack input (8, 9) Switch the power on (3) and gradually turn the rotary .
VOLUME control clockwise and increase volume level to the required amount.
The stereo/mono switch (6) offers mono output for both speakers if required. Stereo is default.
Adjust TREBLE (7) and BASS (10) controls to provide the desired tonal response.
The centre position is unaffected, to the left is cut and to the right is boost.
Turn down rotary VOLUME control before switching off.
1
Fuse holder
2
Mains inlet (Fig.8 BC5A, IEC BC6A)
3
Power on/off switch
4
Rotary VOLUME control
5
Satellite speaker output
6
Stereo/mono switch
7
Rotary TREBLE tone control
8
3.5mm stereo line input
9
L+R RCA line input
10
Rotary BASS tone control

Specyfikacje produktu

Marka: QTX
Kategoria: system hi-fi
Model: BC5A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QTX BC5A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi QTX

QTX

QTX BC5A Instrukcja

8 Sierpnia 2024
QTX

QTX KAD-2BT Instrukcja

7 Sierpnia 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

Philips

Philips TAM3205M2 Instrukcja

14 Stycznia 2025
Philips

Philips TAM3505M2 Instrukcja

14 Stycznia 2025
OSD Audio

OSD Audio Nero Stream ARC Instrukcja

14 Stycznia 2025
Morel

Morel SUB-8X Instrukcja

14 Stycznia 2025
Morel

Morel BEAT-X Instrukcja

14 Stycznia 2025
Morel

Morel Sopran 634 Instrukcja

14 Stycznia 2025
Klipsch

Klipsch HD Theater 500 Instrukcja

14 Stycznia 2025
Lenco

Lenco MC-129 MP3 Instrukcja

13 Stycznia 2025
Terratec

Terratec HA-1 Charge Instrukcja

13 Stycznia 2025
Thomson

Thomson MIC400BT Instrukcja

12 Stycznia 2025