Instrukcja obsługi QSC RMX 2450a

QSC odbiornik RMX 2450a

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC RMX 2450a (65 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/65
RMXa
User Manual
*TD-000407-01*
TD-000407-01-C
2
EN
EXPLANATION OF SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.
The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in CAUTION!
damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.
The term " " is used to indicate additional useful information.NOTE
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"
voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating
and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily operable after installation. On units
equipped with powerCon® connectors, the AC Mains disconnect device is the AC Mains plug only; do not use the appliance coupler.
Adhere to all applicable, local codes.
Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
3
EN
RoHS Statement
The RMXa products are in compliance with European Directive 2002/95/EC – Restriction of Hazardous Substances (RoHS).
The RMXa products are in compliance with “China RoHS” directives. The following chart is provided for product use in China and its territories:
RMXa
部件名称
(Part Name)
有毒有害物质或元素
(Toxic or hazardous Substances and Elements )
(Pb)
(Hg)
(Cd)
六价铬
(Cr(vi))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
电路板组件
(PCB Assemblies)
X O X O O O
机壳装配件
(Chassis Assemblies) X O X O O O
O: 表明这些有毒或有害物质在部件使用的同类材料中的含量是在 SJ/T11363_2006极限的要求之下。
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/
T11363-2006.
X: 表明这些有毒或有害物质在部件使用的同类材料中至少有一种而含量是在SJ/T11363_2006极限的要求之上。
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit
requirement in SJ/T11363-2006.
FCC Statement
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
NOTE:
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Specyfikacje produktu

Marka: QSC
Kategoria: odbiornik
Model: RMX 2450a
Kolor produktu: Czarny
Wbudowany wyłącznik: Tak
Napięcie wejściowe AC: 100-230 V
Waga produktu: 20200 g
Technologia łączności: Przewodowa
Gniazdko wyjścia DC: Tak
Przeznaczenie: Dom
Kanały wyjścia audio: - kan.
Waga wraz z opakowaniem: 23000 g
Wejście XLR: Tak
Diody LED: Tak
Maksymalne natężenie prądu: 15.6 A
Moc szczytowa na kanał: 2400 W
Klasa wzmacniacza: H
Współczynnik zawartości harmonicznych: 1 %
Stosunek sygnału do szumu: -100 dB
Zasięg częstotliwości: 20 - 20000 Hz
Impedancja wejściowa: 20000 Ω
Pojemność stelaża: 2U
Współczynnik tłumienia: 300

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QSC RMX 2450a, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik QSC

QSC

QSC RMX 2450a Instrukcja

2 Września 2024
QSC

QSC CX108V Instrukcja

28 Sierpnia 2024
QSC

QSC CXD4.5 Instrukcja

26 Sierpnia 2024
QSC

QSC MP-A20V Instrukcja

15 Sierpnia 2024
QSC

QSC PLX3602 Instrukcja

9 Sierpnia 2024
QSC

QSC ISA1350 Instrukcja

8 Sierpnia 2024
QSC

QSC PLX3102 Instrukcja

6 Lipca 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024