Instrukcja obsługi QSC DPA4.2Q

QSC odbiornik DPA4.2Q

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC DPA4.2Q (16 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

DPA-Q Amplifiers

User Manual

DPA4.2Q — 4 Channel, 2000 W Network Ampliﬁ er

DPA4.3Q — 4 Channel, 4000 W Network Ampliﬁ er

DPA4.5Q — 4 Channel, 8000 W Network Ampliﬁ er

TD-000436-01 -A

*TD-000436-01*

TD-000436 -01 -A

EXPLANATION OF SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.

The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in CAUTION!

damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.

The term " " is used to indicate additional useful information.NOTE

The intent of the lightning ﬂ ash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"

voltage within the product's enclosure that may be of sufﬁ cient magnitude to constitute a risk of electric shock to humans.

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating

and maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!:

TO PREVENT FIRE OR E UIPMENT TO RAIN OR MOISTURE. LECTRIC SHOCK, DO NOT EXPOSE THIS EQ

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

9. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protective earthing connection.

10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from

the apparatus.

12. Only use attachments/accessories speciﬁ ed by the manufacturer.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

15. The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily operable after installation. On units

equipped with powerCon® connectors, the AC Mains disconnect device is the AC Mains plug only; do not use the appliance coupler.

16. Adhere to all applicable, local codes.

17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

18. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus. Clean only with a dry cloth.

19. Do not unplug the unit by pulling on the cord, use the plug.

20. Do not submerge the apparatus in water or liquids.

21. Keep ventilation opening free of dust or other matter.

TD-000436 -01 -A

Maintenance and Repair

WARNING!:

Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted

maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the

creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC

authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm or related

damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.

FCC Statement

For DPA4.3Q and DPA4.5Q

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at his own expense.

For DPA4.2Q

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

RoHS STATEMENT

The QSC DPA4.2Q, DPA4.3Q , and DPA4.5Q ampliﬁ ers are in compliance with European Directive 2011/65/EU – Restriction of Hazardous

Substances (RoHS2).

The QSC DPA4.2Q, DPA4.3Q , and DPA4.5Q ampliﬁ ers are in compliance with “China RoHS” directives. The following chart is provided for product use

in China and its territories:

QSC DPA4.2Q, DPA4.3Q , and DPA4.5Q Ampliﬁ ers

部件名称

(Part Name)

有毒有害物质或元素

(Toxic or hazardous Substances and Elements)

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(vi))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

电路板组件

(PCB Assemblies)

X O O O O O

机壳装配件

(Chassis Assemblies)

X O O O O O

O: SJ/T11363_2006 表明这些有毒或有害物质在部件使用的同类材料中的含量是在极限的要求之下。

(O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement

in SJ/T11363_2006.)

X: SJ/T11363_2006表明这些有毒或有害物质在部件使用的同类材料中至少有一种含量是在极限的要求之上。

(X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the

limit requirement in SJ/T11363_2006.)

Warranty

For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com

Specyfikacje produktu

Marka:	QSC
Kategoria:	odbiornik
Model:	DPA4.2Q

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z QSC DPA4.2Q, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje odbiornik QSC

QSC CX4 Instrukcja

7 Stycznia 2025

QSC DPA4.2Q Instrukcja

7 Stycznia 2025

QSC USA 400 Instrukcja

7 Stycznia 2025

QSC DPA4.3Q Instrukcja

7 Stycznia 2025

QSC USA 900 Instrukcja

7 Stycznia 2025

QSC SRA1222 Instrukcja

7 Stycznia 2025

7 Stycznia 2025

7 Stycznia 2025

7 Stycznia 2025

7 Stycznia 2025

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Jensen MPR210RGB Instrukcja

7 Stycznia 2025

Audibax Miami Instrukcja

5 Stycznia 2025

Audibax Kansas Instrukcja

5 Stycznia 2025

AudioControl Epic Four Instrukcja

5 Stycznia 2025

Audibax Zone 360 BT Instrukcja

5 Stycznia 2025

Audibax Dayton 120T BT Instrukcja

5 Stycznia 2025

Audibax Akron 2-2400 Instrukcja

5 Stycznia 2025

Audibax Dayton 600 Instrukcja

5 Stycznia 2025

Audibax Flint Kit Instrukcja

5 Stycznia 2025

Audibax PA4250T Instrukcja

5 Stycznia 2025