Instrukcja obsługi QSC RAVE 522aa
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC RAVE 522aa (26 stron) w kategorii edytor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/26
TD-000164-00 rev.B
*TD-000164-00*
RAVE 522aa
8x8 CobraNet Enabled Signal Processor
Hardware Manual
2
IMPORTANT SAFETY PRECAUTIONS & EXPLANATION OF SYMBOLS
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous” voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to humans.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in this manual.
SAFEGAURDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to
assure your personal safety. Improper use can result in potential electrical shock or fire hazards. In order
not to defeat the safeguards, observe the following instructions for its installation, use and servicing.
CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.
1- Maximum operating ambient temperature is 50°C (122°F).
2- Never restrict airflow through the device fan or vents. Please insure that the air intake and exhaust
vents are unobstructed.
3- When installing equipment into rack, distribute the units evenly. Otherwise, hazardous conditions
could be created by an uneven weight distribution.
4- Connect the unit only to a properly rated supply circuit. The RAVE 522aa is suitable for connection to
100 - 240 VAC, 47 - 440 hertz, with no special considerations other than the appropriate IEC power cord.
5- Reliable Earthing (Grounding) of rack-mounted equipment should be maintained.
LITHIUM BATTERY WARNING
THIS EQUIPMENT CONTAINS A NON-RECHARGEABLE LITHIUM BATTERY. LITHIUM IS A CHEMICAL
KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER OR BIRTH DEFECTS. THE NON-RECHARGE-
ABLE LITHIUM BATTERY CONTAINED IN THIS EQUIPMENT MAY EXPLODE IF IT IS EXPOSED TO FIRE OR
EXTREME HEAT. DO NOT SHORT CIRCUIT THE BATTERY. DO NOT ATTEMPT TO RECHARGE THE NON-
RECHARGEABLE LITHIUM BATTERY.
FCC INTERFERENCE STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance to the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by switching the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
© Copyright 2004 QSC Audio Products, Inc. QSC® is a registered trademark of QSC Audio Products, Inc. “QSC” and the QSC logo are registered
with the U.S. Patent and Trademark Office. All trademarks are the property of their respective owners.
3
Introduction
1- Power indicator
2- Diagnostic indicator
3- Network status indicators
4- Multi-function push buttons
5- Display
6- Rotary select/accept knob
7- Safe Mode push switch (recessed)
8- Analog outputs
9- Analog inputs
10- Relay outputs
11- Logic outputs
12- Omni inputs
13- RS-232 port
14- Network status indicators
15- QSControl 10BaseT receptacle
16- CobraNet 100BaseTx receptacle
17- IEC power inlet
The RAVE 522aa provides the digital audio transport, and
signal processing needed to bind a group of amplifiers and
loudspeakers into an integrated functioning system. In con-
junction with QSControl.net software, the RAVE 522aa
enables the user to design, test and deploy professional
audio reinforcement and distribution systems ranging in size
from one to hundreds of channels.
A standard Windows computer is the principle user-inter-
face for controlling the overall RAVE/QSControl system.
However, the RAVE 522aa also offers a front panel interface
for accessing critical functions.
A single QSControl server computer can support several cli-
ents running QSC's latest Venue Manager software. Thus,
the sound system can be operated via several computers,
roaming wireless laptops, tablets, etc., all at the same time,
from anywhere a connection to the QSControl network is
available.
The QSControl network can also be managed from a single
computer running both the client and the server. Once all
devices in a system are configured, a computer is no longer
required on that system’s network. All basic functions of the
RAVE 522aa continue to operate with or without a control
computer connected to the network.
Audio enters a RAVE 522aa either through analog line
inputs or from CobraNet source devices such as QSC's line
of RAVE digital audio routers. Any combination of 16 Cobra-
Net channels (selected from up to 4 bundles of 32 channels)
can be routed into the 24 x 24 DSP engine. Any or all of the
24 DSP channels can also be routed to up to 32 CobraNet
channels on the network.
Unlike many configurable DSP boxes, the intrinsic process-
ing latency of the RAVE 522aa is both short and fixed at
0.396 milliseconds. When analog input and analog outputs
are used, the total delay is 2.354 milliseconds. The delay
does not change regardless of the DSP configuration, unless
the configuration intentionally adds more delay.
The RAVE 522aa also supports the new optional low-latency
CobraNet feature that provides transport at only 2.66 milli-
seconds delay.
See page 14 for detailed descriptions.
Don’t want to read the entire manual? Just
want to dig right in? Go to page 18....
Specyfikacje produktu
| Marka: | QSC |
| Kategoria: | edytor |
| Model: | RAVE 522aa |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z QSC RAVE 522aa, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje edytor QSC
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
Instrukcje edytor
- edytor Yamaha
- edytor Hikvision
- edytor Roland
- edytor Bose
- edytor Asus
- edytor Allen & Heath
- edytor HP
- edytor Heritage Audio
- edytor Shure
- edytor Alpine
- edytor Datapath
- edytor LD Systems
- edytor DataVideo
- edytor Pyle
- edytor Zoom
- edytor ART
- edytor TC Helicon
- edytor Vivolink
- edytor Eventide
- edytor DBX
- edytor Lindell Audio
- edytor Smart-AVI
- edytor Ashly
- edytor Gefen
- edytor SEADA
- edytor Radial Engineering
- edytor Arturia
- edytor Lectrosonics
- edytor TOA
- edytor Neutrik
- edytor Tascam
- edytor SPL
- edytor RGBlink
- edytor Rupert Neve Designs
- edytor Dangerous Music
- edytor Matrox
- edytor Intel
- edytor Fredenstein
- edytor Golden Age Project
- edytor Sonifex
- edytor Solid State Logic
- edytor Black Lion Audio
- edytor Mathew Lane
- edytor Warm Audio
- edytor Drawmer
- edytor SIIG
- edytor Manley
- edytor MuxLab
- edytor Helix
- edytor Christie
- edytor Rane
- edytor AMD
- edytor Lexicon
- edytor Empirical Labs
- edytor AudioThing
- edytor Avenview
- edytor Audibax
- edytor FabFilter
- edytor Metric Halo
- edytor Henry Engineering
- edytor MyMix
- edytor Decimator
Najnowsze instrukcje dla edytor
5 Stycznia 2025
5 Stycznia 2025
5 Stycznia 2025
29 Grudnia 2024
27 Grudnia 2024
25 Grudnia 2024
21 Grudnia 2024
11 Grudnia 2024
10 Grudnia 2024
8 Grudnia 2024