Instrukcja obsługi QSC RAVE 520uz
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC RAVE 520uz (28 stron) w kategorii edytor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/28
TD-000201-00 rev.A
*TD-000201-00*
RAVE 520uz
8 input CobraNet Enabled Signal Processor
Hardware Manual
2
IMPORTANT SAFETY PRECAUTIONS & EXPLANATION OF SYMBOLS
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous” voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to humans.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in this manual.
SAFEGAURDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to
assure your personal safety. Improper use can result in potential electrical shock or fire hazards. In order
not to defeat the safeguards, observe the following instructions for its installation, use and servicing.
CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.
1- Maximum operating ambient temperature is 50°C (122°F).
2- Never restrict airflow through the device fan or vents. Please insure that the air intake and exhaust
vents are unobstructed.
3- When installing equipment into rack, distribute the units evenly. Otherwise, hazardous conditions
could be created by an uneven weight distribution.
4- Connect the unit only to a properly rated supply circuit. The RAVE 520uz is suitable for connection to
100 - 240 VAC, 47 - 440 hertz, with no special considerations other than the appropriate IEC power cord.
5- Reliable Earthing (Grounding) of rack-mounted equipment should be maintained.
LITHIUM BATTERY WARNING
THIS EQUIPMENT CONTAINS A NON-RECHARGEABLE LITHIUM BATTERY. LITHIUM IS A CHEMICAL
KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER OR BIRTH DEFECTS. THE NON-RECHARGE-
ABLE LITHIUM BATTERY CONTAINED IN THIS EQUIPMENT MAY EXPLODE IF IT IS EXPOSED TO FIRE OR
EXTREME HEAT. DO NOT SHORT CIRCUIT THE BATTERY. DO NOT ATTEMPT TO RECHARGE THE NON-
RECHARGEABLE LITHIUM BATTERY.
FCC INTERFERENCE STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance to the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by switching the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
© Copyright 2005 QSC Audio Products, Inc. QSC® is a registered trademark of QSC Audio Products, Inc. “QSC” and the QSC logo are registered
with the U.S. Patent and Trademark Office. All trademarks are the property of their respective owners.
3
Introduction
1- Power indicator
2- Diagnostic indicator
3- Network status indicators
4- Signal presence/clip indicators
5- Multi-function push buttons
6- Display
7- Rotary select/accept knob
8- Safe Mode switch (recessed)
9- Mic/lineinputs
10- Relay outputs
11- Logic outputs
12- Omni inputs
13- RS-232 port
14- Network status indicators
15- QSControl 10BaseT receptacle
16- CobraNet 100BaseTx receptacle
17- IEC power inlet
The RAVE 520uz provides the digital audio transport and
signal processing needed to distribute audio throughout an
integrated functioning system. In conjunction with QSCon-
trol.net software, the RAVE 520uz enables the user to
design, test and deploy professional audio reinforcement
and distribution systems ranging in size from one to hun-
dreds of channels.
A standard Windows computer is the principle user-inter-
face for controlling the overall RAVE/QSControl system.
However, the RAVE 520uz also offers a front panel interface
for accessing critical functions.
A single QSControl.net server computer can support several
clients running QSC's latest Venue Manager software. Thus,
the sound system can be operated via several computers,
roaming wireless laptops, tablets, etc., all at the same time,
from anywhere a connection to the QSControl.net network
is available.
The QSControl.net network can also be managed from a sin-
gle computer running both the client and the server. Once all
RAVE devices in a system are configured, a computer is no
longer required on that system’s network. All basic func-
tions of the RAVE 520uz continue to operate with or without
a control computer connected to the network.
The configurable DSP engine provides all of the functions
necessary to handle the input portion of a signal chain, such
as delays, equalization, compression/limiting, etc. Audio
output is exclusively via CobraNet .
Audio enters a RAVE 520uz either through analog universal
inputs (mic to line level with software-selectable +48V
phantom power) or from CobraNet source devices such as
QSC's line of RAVE digital audio routers. Any combination of
16 CobraNet channels (selected from up to 4 bundles of 32
channels) can be routed into the 24 x 24 DSP engine. Any or
all of the 24 DSP channels can also be routed to up to 32
CobraNet channels on the network.
See page 14 for detailed descriptions.
Don’t want to read the entire manual? Just
want to dig right in? Go to page 18....
Specyfikacje produktu
| Marka: | QSC |
| Kategoria: | edytor |
| Model: | RAVE 520uz |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z QSC RAVE 520uz, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje edytor QSC
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
7 Stycznia 2025
Instrukcje edytor
- edytor Yamaha
- edytor Hikvision
- edytor Roland
- edytor Bose
- edytor Asus
- edytor Allen & Heath
- edytor HP
- edytor Heritage Audio
- edytor Shure
- edytor Alpine
- edytor Datapath
- edytor LD Systems
- edytor DataVideo
- edytor Pyle
- edytor Zoom
- edytor ART
- edytor TC Helicon
- edytor Vivolink
- edytor Eventide
- edytor DBX
- edytor Lindell Audio
- edytor Smart-AVI
- edytor Ashly
- edytor Gefen
- edytor SEADA
- edytor Radial Engineering
- edytor Arturia
- edytor Lectrosonics
- edytor TOA
- edytor Neutrik
- edytor Tascam
- edytor SPL
- edytor RGBlink
- edytor Rupert Neve Designs
- edytor Dangerous Music
- edytor Matrox
- edytor Intel
- edytor Fredenstein
- edytor Golden Age Project
- edytor Sonifex
- edytor Solid State Logic
- edytor Black Lion Audio
- edytor Mathew Lane
- edytor Warm Audio
- edytor Drawmer
- edytor SIIG
- edytor Manley
- edytor MuxLab
- edytor Helix
- edytor Christie
- edytor Rane
- edytor AMD
- edytor Lexicon
- edytor Empirical Labs
- edytor AudioThing
- edytor Avenview
- edytor Audibax
- edytor FabFilter
- edytor Metric Halo
- edytor Henry Engineering
- edytor MyMix
- edytor Decimator
Najnowsze instrukcje dla edytor
5 Stycznia 2025
5 Stycznia 2025
5 Stycznia 2025
29 Grudnia 2024
27 Grudnia 2024
25 Grudnia 2024
21 Grudnia 2024
11 Grudnia 2024
10 Grudnia 2024
8 Grudnia 2024