Instrukcja obsługi QSC PLD4.3

QSC odbiornik PLD4.3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC PLD4.3 (145 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/145

PLD Amplifiers

User Manual

PLD4.2 — 4 Channel, 1600 W Ampliﬁer

PLD4.3 — 4 Channel, 2500 W Ampliﬁer

PLD4.5 — 4 Channel, 5000 W Ampliﬁer

TD-000368-00-A

*TD-000368-00*

TD-000368-00-A

EXPLANATION OF SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.

The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in CAUTION!

damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.

The term " " is used to indicate additional useful information.NOTE

The intent of the lightning ﬂash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"

voltage within the product's enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to humans.

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating

and maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!:

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from

the apparatus.

• Only use attachments/accessories speciﬁed by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

• The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily operable after installation.

• Adhere to all applicable, local codes.

• Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

TD-000368-00-A

FCC Statement

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his

own expense.

RoHS STATEMENT

The QSC PLD4.2, PLD4.3 and PLD4.5 ampliﬁers are in compliance with European Directive 2002/95/EC – Restriction of Hazardous Substances (RoHS).

The QSC PLD4.2, PLD4.3 and PLD4.5 ampliﬁers are in compliance with “China RoHS” directives. The following chart is provided for product use in

China and its territories:

QSC PLD4.2, PLD4.3, and PLD4.5 Ampliﬁers

部件名称

(Part Name)

有毒有害物质或元素

(Toxic or hazardous Substances and Elements)

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(vi))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

电路板组件

(PCB Assemblies)

X O O O O O

机壳装配件

(Chassis Assemblies)

X O O O O O

O: SJ/T11363_2006 表明这些有毒或有害物质在部件使用的同类材料中的含量是在极限的要求之下。

(O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement

in SJ/T11363_2006.)

X: SJ/T11363_2006表明这些有毒或有害物质在部件使用的同类材料中至少有一种含量是在极限的要求之上。

(X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the

limit requirement in SJ/T11363_2006.)

Specyfikacje produktu

Marka:	QSC
Kategoria:	odbiornik
Model:	PLD4.3
Kolor produktu:	Czarny
Wbudowany wyłącznik:	Tak
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100-240 V
Wysokość produktu:	89 mm
Szerokość produktu:	482 mm
Głębokość produktu:	406 mm
Waga produktu:	9500 g
Technologia łączności:	Przewodowa
Gniazdko wyjścia DC:	Tak
Przeznaczenie:	Dom
Kanały wyjścia audio:	4.0 kan.
Diody LED:	Tak
Moc szczytowa na kanał:	5000 W
Współczynnik zawartości harmonicznych:	0.01 %
Stosunek sygnału do szumu:	-109 dB
Zasięg częstotliwości:	20 - 20000 Hz
Impedancja wejściowa:	10000 Ω
Typ podłączenia głośników:	XLR / NL4