Instrukcja obsługi QSC GXD 4

QSC odbiornik GXD 4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla QSC GXD 4 (14 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/14

GXD Amplifier

User Manual

GXD 4

GXD 8

TD-000450-00-B

*TD-000450-00*

TD-000450-00-B

EXPLANATION OF SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.

The term “ ” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in CAUTION!

damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.

The term " " is used to indicate additional useful information.NOTE

The intent of the lightning ﬂash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"

voltage within the product's enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to humans.

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating

and maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

14. The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily operable after installation.

15. Adhere to all applicable, local codes.

16. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protective earthing connection.

17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

18. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.

19. Do not unplug the unit by pulling on the cord, use the plug.

20. Do not submerge the apparatus in water or liquids.

21. Keep ventilation opening free of dust or other matter.

TD-000450-00-B

Maintenance and Repair

WARNING!:

Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted

maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the

creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC

authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm or related

damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.

FCC Statement

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warranty

For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com

Specyfikacje produktu

Marka:	QSC
Kategoria:	odbiornik
Model:	GXD 4
Kolor produktu:	Czarny, Srebrny
Rodzaj zasilania:	Prąd przemienny
Wbudowany wyłącznik:	Tak
Napięcie wejściowe AC:	100, 120, 230 V
Wysokość produktu:	89 mm
Szerokość produktu:	483 mm
Głębokość produktu:	259 mm
Waga produktu:	5100 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	CE, RoHS, WEEE
Technologia łączności:	Przewodowa
Pasmo częstotliwości:	20 - 20000 GHz
Skrócona instrukcja obsługi:	Tak
Przewody:	Prąd przemienny
Kanały wyjścia audio:	- kan.
Wejście XLR:	Tak
Zasilanie:	1/8 power at 4Ω
Maksymalne natężenie prądu:	3.4 A
Moc szczytowa na kanał:	- W
Klasa wzmacniacza:	D
Współczynnik zawartości harmonicznych:	1 %
Stosunek sygnału do szumu:	100 dB
Moc dynamiczna na kanał (4 Ohm):	800 W
Moc dynamiczna na kanał (8 Ohm):	600 W
Impedancja wejściowa:	20 Ω
Typ podłączenia głośników:	XLR / 1⁄4" TRS
Zgodność z zasadami zrównoważonego rozwoju:	Tak
Współczynnik tłumienia:	100
Moc pomostowa wyjścia na kanał (4 Ohm):	600 W
Zysk anteny:	33.5 dB