Instrukcja obsługi Qoltec 50241

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Qoltec 50241 (5 stron) w kategorii drukarka etykiet. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
U
U
U
UUSER
SER
SER
SERSER MA
MA
MA
MA MANUAL
NUAL
NUAL
NUALNUAL
Therm
Therm
Therm
ThermThermal Trans
al Trans
al Trans
al Transal Transfer Label Pr
fer Label Pr
fer Label Pr
fer Label Prfer Label Printer
inter
inter
inter inter
MODEL: 50241
MODEL: 50241
MODEL: 50241
MODEL: 50241MODEL: 50241
www.qoltec.com
www.qoltec.com
www.qoltec.com
www.qoltec.comwww.qoltec.com
1.
1.
1.
1.1. Package content
Package content
Package content
Package content Package content
2.
2.
2.
2.2. Main accessories and functions
Main accessories and functions
Main accessories and functions
Main accessories and functions Main accessories and functions
Power line
Printer
User manual
CD with drivers
USB line
Clip
TPH
Platen
Rubber covered roller
Bottom case
Power switch
Guide paper
Guide wheel
Upper cover
Clip
a) The power switch
- The printer’s power switch is in position 1 – the printer starts
- The printer’s power switch is in position 0 – the printer is off.
- Always turn off the printer with power switchNEVER turn off the printer by disconnecting
power line because it can be damaged easily and printed data will be lost.
b) Use only mains power – otherwise the life of the device may be shortened.
c) After shutting down the printer, wait 5 seconds before rebooting the printer – otherwise
power adapter can be damaged.
d) After shutting down the printer, LEDs will turn off after 2-3 seconds.
3.
3.
3.
3.3. Preparation before usage:
Preparation before usage:
Preparation before usage:
Preparation before usage: Preparation before usage:
a) Connect power line.
b) Connect USB cable.
c) Turn on the power – Switch has to be in position one.
d) Install drivers from attached CD.
e) Choosing the paper type: In the “Printer Preferences” choose “Advancedand select the
paper size.
The printer has ready-to-use templates for thermal transfer labels, which can be easily
chosen. You can also change paper size manually if there is such a need.
f) Printing test page: Enter the Control panel -> Hardware and Sound -> Devices and printers -
> right click on your newly installed printer and choose from the drop down list “Printer
preferences”. New window pops out, then click on Print test page.
If test page has been printed, it means that driver has been installed properly.
4.
4.
4.
4.4. Printer Setup
Printer Setup
Printer Setup
Printer Setup Printer Setup
LEDs and sounds inform about printer status and its faults.
a) Skip a blank label: In standby mode, when paper is loaded properly, press and hold FEED
button to skip a blank label.
b) Automatic label identification: Turn off the printer, open the cover, load the paper and
close the cover, reset the printer to initialize the printer (about 3-5 seconds). Press the
FEED button and hold until you hear the sound. After button is released the printer will
start automatic label identification.
c) Device self-test: When the printer is in standby mode and the paper is loaded properly,
press and hold button, until you hear double sound, self-test is finished.
d) Paper installation:

Specyfikacje produktu

Marka: Qoltec
Kategoria: drukarka etykiet
Model: 50241

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Qoltec 50241, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą