Instrukcja obsługi Pyle Sound 7 PHPMP39

Pyle zestaw słuchawkowy Sound 7 PHPMP39

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle Sound 7 PHPMP39 (2 stron) w kategorii zestaw słuchawkowy. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Model: PHPMP39
The last playing song or broadcasting station
memory function
1.
Connect the headphone USB cable. The chargings to a USB port via
indicator will be on. The charging function is working The now .
indicator will off automatically after charging is finished. turn
2.
The charging time is about hours. 2.5
Wired headphone function
Using one additional cable with stereo 3.5mm plugs (not included) to connect
the headphone to a the Volume control to then external device. Adjust
appropriate level. Do not switch on the headphone .s for this function
Technical specifications
•
•
•
• •
•
•
•
• Input DC: 5±0.5V/180mA •
•
Bluetooth Specification: V2.1+EDR System
Audio mode: compatible with MP3 WAV and WMAformats、
Frequency range of the receiver: 88 ~ 108MHz
S/N ratio: 90dB THD 1%
Frequency response: 20Hz ~ 20KHz
Power supply: 350mA/h chargeable battery (built-in)
Continuous working time: more than 9 hours
Charging time: about 3 hours
Available for the SD/TF card up to 16GB
＞ ＜
BT / Card/ FM
Warning: when the charging light blinks twice with a beep tone
is heard, the battery needs to be charged otherwise the
headset will ff. Before you use this Bluetooth headset, turn o
please fully charge the battery.
Charging:
SD card reader function
1.Plug a SD card in the headphone, turn it on and Press BT/Card/FM
state.
button once. It comes into the
Makre sure you are using compatible file types. Digital Audio File
Compatibility: MP3, WAV, WMA
Card
USB wired headphone function
Connect the headphone USB cable s to a computer via . You can also edit
and transfer your compatible digital audio files using this method.
Turn off the headphone in the state of playing, the last song or station
being played will be recovered automatically at the next start-up.
You need to search FM programs when using the FM radio function
at the first time.
1 and hold th.Press e MFB button for 2 seconds. The headphone will be
in the status of automatically searchings. You can listen to all the FM
stations station will. Every will be played for about 2s. The power indicator
blink at the same time. When you listen to one program playing for more
than 6 seconds or the indicator stops ing, searching finished. The blink is
headphone will store all the s searched. You can press the PRE/ tations
NEXT button to select the you want. and browse between station
Note: search / scan stations in an area of good signal reception.
FM radio function
Headphone Functions
3
1
2
8
7
6
4
5
9
Layout
10
Headphone Use
9
11 12
1. Bluetooth stereo headphone function
2. MP3 playing function with SD card.
( card )Make sure a compatible SD is connected
3. FM radio
4. Stereo wired headphone function by connecting to an external device.
(Aux 3.5mm connection cable required)
1. Power ON/OFF switch
2. Charging indicator
3. USB port
4. Power indicator
5. BT/Card/FM Mode button
6. PRE button
7 .MFB (Multi-Function Button)
8. NEXT button
9. SD slot
10. Volume control
11. Audio in/out jack
12. MIC
Bluetooth stereo headphone function
After searched, select “ ” in the Bluetooth device list. After pair , PHPMP39 ing
the power indicator blinks twice with a tone then blinks green'beep' , the light .
(You may be required to enter a password, depending on your device,
pairing code for some mobile phone.password is “ ”0000
Playing music:
When the head connect with mobile phone or a Bluetoothphones are ed a
transmitter which supports A2DP, you can enjoy music through the
head wirelessly. Reference “MP3 playing function 3 & 4phoens notes: " on the
next page for more information.
*The head will power off in 5 minutes after disconnectphones B/T ion.
Pairing the headset with Bluetooth devices:
Switch the headphone on, the power indicator blinks red and green light s s
alternately. The headphones are now in pairing mode, ready to connect.
Pairing the headset with a Bluetooth mobile phone:
Make sure your mobile phone has Bluetooth compatibility with the
headphones. Specific pair procedures are not the same with different mobile
phones. Refer to your mobile phone manual for further information.
General Pairing s areteps as follows:
a) Keep the headset and your mobile phone in the range of 1 meter
when pairing.
b) Start the Bluetooth function of mobile ph one and search the
Bluetooth devices.
c) Switch the headphone on.
Making calls with the headset:
Function OperationStatus of headset
Voice dial* Standby mode
P the ress MFB twice quickly.
Redial last
number Standby mode Press and hold MFB for 1 second.
Conversation mode Turn the volume control.
Answer calling Ringing Press MFB.
Hang up calling Conversation Press MFB.
Switchover Conversation Press PRE or NEXT to change between
the headset mode and cell phone mode.
Reject calling Ringing Press and hold MFB for 1 second.
*The voice dial list should be pre-stored in your mobile phone.
(This feature is not compatible with all devices)
Volume up
or down
MP3 playing function
1. Connect an into sSD card with songs into the SD card slot the headphone .
The SD card can be taken out by the SD card once more.gently pushing
2. Switch on the power. The indicator shi . Now the headphone will ne
comes into button one time to
change to the state, the power indicator blinks red.
Adjust the vo lume, p
Bluetooth
Card
mode. Press the BT/Card/FM
3. ress the PRE/NEXT button to select d iff erent
songs. Press the MFB button to p lay or pause the se lected song.
4.Press the BT/Card/FM button to exchange b etween the ,
Card playing and
remains in the
FM radio . If no card is plugged in, the headsetmodes
Bluetooth or FM radio .mode
Bluetooth

Specyfikacje produktu

Marka: Pyle
Kategoria: zestaw słuchawkowy
Model: Sound 7 PHPMP39

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle Sound 7 PHPMP39, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje zestaw słuchawkowy Pyle

Pyle

Pyle Sound 7 PHPMP39 Instrukcja

16 Sierpnia 2024
Pyle

Pyle Health PHPHA79 Instrukcja

16 Maja 2024

Instrukcje zestaw słuchawkowy

Najnowsze instrukcje dla zestaw słuchawkowy

Corsair

Corsair Virtuoso RGB Wireless XT Instrukcja

13 Października 2024
Philips

Philips TAT3509 Instrukcja

9 Października 2024
Krom

Krom Kopa 7.1 Instrukcja

9 Października 2024
OTL Technologies

OTL Technologies HK0856 Instrukcja

9 Października 2024
Midland

Midland BTR1 Advanced Instrukcja

9 Października 2024
Krom

Krom Kopa Move Instrukcja

9 Października 2024
Vorago

Vorago HSB-500 Instrukcja

9 Października 2024
Krom

Krom Kopa Instrukcja

9 Października 2024
Greenmouse

Greenmouse EP-TWS10 Instrukcja

9 Października 2024
Sennheiser

Sennheiser ADAPT 260 Instrukcja

9 Października 2024