Instrukcja obsługi Pyle PSS6


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PSS6 (7 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/7
HIGH POWER STEREO SPEAKER SELECTOR 
MODEL  :PSS4 /PSS6
www.pyleaudio.com
1
Thank you for purchasing PYLE PRO Multi-Speaker Selectors. It lets you connect up   
to four (PSS4) or six (PSS6) separate pairs of speakers to your stereo receiver/amplifier.    
The control center is especially convenient if you have speaker sets in different rooms  
and want to turn them on and off independently.   You   can enjoy the convenience and
flexibility of listening to multiple speaker pairs simultaneously.  
The control center lets you use one to four (PSS4) or six (PSS6) sets of speakers at a    
time, and is designed to operate with a stereo receiver/amplifier that has a maximum of    
1   00 watts per channel, and with speaker systems that have a minimum impedance of 8
ohms (see “Impedance Chart” on page 5)  
2
PREPARATIONS
Use the PYLE PRO Speaker Selectors only with amplifiers rated at 00 watts per  1
channel or less. 
Your PYLE PRO Speaker Selector is designed to accept any size cable up to 4 gauge    1
non-terminated speaker wire. If you’re using non-terminated speaker wire, do not use    
any speaker wire that is larger than 4 gauge. 1  The lower the gauge number, the larger    
the cable (e.g., 2 gauge is larger in actual physical 1  1 size than 4 gauge).
Do not hook the outputs of one selector into the inputs of another speaker selector    
together.
MAKING THE CONNECTIONS 
The control center divides the power from your receiver/amplifier differently to its  
speaker terminals. (This is especially noticeable when you connect only one pair of  
speakers. If you connect more than one pair of speakers, see “Impedance Chart” on 
page 5 to selector the best terminals to connect.) For the best performance, make the      
connections based on how frequently you use each set of speakers.  
Cautions:To avoid damaging your speakers or receiver/amplifier:  
Be sure your receiver/amplifiers power is turned off before you make the connections.  
Never let the speaker wire’s bare ends touch each other or the adjacent terminals on the      
control center.
Do not connect more than one pair of sepakers to each set of terminals.    


Specyfikacje produktu

Marka: Pyle
Kategoria: przedłużacz AV
Model: PSS6

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PSS6, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje przedłużacz AV Pyle

Pyle

Pyle PSS6 Instrukcja

6 Września 2024

Instrukcje przedłużacz AV

Najnowsze instrukcje dla przedłużacz AV