Instrukcja obsługi Pyle PSLHTM25

Pyle Podcinacz PSLHTM25

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PSLHTM25 (8 stron) w kategorii Podcinacz. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
CAUTION: READ ALL SAFETY REGULATIONS AND INSTRUCTIONS.
1. WORKPLACE SAFETY
Keep your work area clean and well illuminated. Untidy or unlit work areas can result in accidents.
Do not use this tool in a potentially explosive environment containing combustible liquids, gases or dust.
Electric tools generate sparks, which can in turn ignite dust or vapors.
Keep children and other persons away from the electric tool while it is being used.
Allowing yourself to get distracted can cause you to lose control of the tool.
2. ELECTRICAL SAFETY
The tool’s connector plug must be able to t into the socket outlet. Do not modify the plug in any way!
Do not use adapter plugs in conjunction with electrically grounded tools. Unmodied plugs and matching socket
outlets reduce the risk of an electric shock.
Avoid touching grounded surfaces, such as those of pipes/tubes, heaters, cookers and refrigerators.
There is an increased risk of getting an electric shock if you are electrically grounded.
Keep the tool away from rain and moisture/wet conditions. Penetration of water into an electric tool increases the
risk of an electric shock.
Do not use the cable to carry the tool, hang it up or pull the plug out of the socket.
Keep the cable away from sources of heat, oil, sharp edges and moving tool parts.
Damaged or tangled cable increases the risk of an electric shock.
If you intend to use an electric tool outdoors, ensure that you only use extension cable that is approved for
outdoor applications. Using extension cable that is approved for outdoor applications reduces the risk of an
electric shock.
If operation of the electric tool in a damp environment can not be avoided, use a earth-leakage circuit-breaker.
The earth-leakage circuit-breaker reduces the risk of an electric shock.
3. PERSONAL SAFETY
Be alert, work conscientiously and exercise appropriate caution when using the electric tool. Do not use the tool
if you are tired or under the inuence of drugs/medication nor alcohol. One moment of carelessness or lack of
attention when using the electric tool can cause serious body injury.
Always wear personal protective equipment (PPE) including safety goggles. Wearing personal protective equipment
such as mask, non-slip footwear, protective headgear and ear mus (depending upon the type of electric tool
and the particular application) reduces the risk of injury.
Make sure that the tool cannot start up accidentally. Ensure that the electric tool is switched o before you
connect the tool to the power supply and/or insert the battery, or pick up and carry the tool.
Physical touching the switch with your ngers when carry the tool or connecting the tool to the power supply
switched on can lead to accidents.
Remove adjusting tools/wrench(es) prior to switching on the power tool. A tool or wrench that is positioned
inside a rotating power tool part can cause injury.
Avoid abnormal working postures. Make sure you stand squarely and keep your balance at ll times.
This way you will be able to have better control over the tool in unexpected situations.
Wear suitable clothes. Never wear loose tting clothes or jewelry. Keep hair, clothes and gloves away from parts.
Loose clothing, dangling jewelry and long hair can be caught by moving parts. If dust extraction and dust
collection devices can be mounted, ensure that these are connected and are properly used. The use of a dust
extraction system can reduce the danger posed by dust.
www.SereneLifeHome.com
2
Failures made in following the safety regulations and instructions may result in an electric shock, re
and/or serious injury. Keep all safety regulations and instructions in a safe place for future use.
The term electric tool“ is used in the safety regulation that refers to electric tools operated from the
mains power supply (with a power cable) and to battery operated electric tools (without a power cable).
4. USING THE TREATMENT OF ELECTRIC TOOLS.
Do not overload your tool. Only use suitable electric tools to perform your work. Using the right electric tool
allows you to work better and safer within the tool’s quoted capacity range.
Do not use an electric tool whose switch is defective. An electric tool that no longer can be switched on or o is
dangerous and must be repaired.
Pull the plug out of the socket and/or remove the battery before making any adjustments to the tool, changing
accessories or put the tool down. This precaution eliminates the possibility of inadvertently starting the tool.
When not in use, store electric tools out of the reach of children. Do not allow those persons to use this tool who
are unfamiliar with it or who have not read these instructions. Electric tools are dangerous when they are used by
inexperienced persons.
Take good care of your tool. Check that moving parts properly function and do not jam, that parts are not broken
o or damaged in any way and that the tool can be used to its full capacity. Have damaged parts repaired prior to
using the tool. The cause of many accidents can be traced back to poorly main tained electric tools.
Keep your blades sharp and clean. Properly maintained blades with sharp edges jam less frequently and are
easier to use.
Make sure to use electric tools, accessories, attachments, etc. in accordance with these instructions.
Take the conditions in your work area and the job in hand into account.
Using electric tools for applications other than those intended can lead to dangerous situations.
5. CAREFUL HANDLING AND USE OF CORDLESS EQUIPMENT.
Ensures that the equipment is switched o before you insert the battery. Inserting the battery into an electric tool
that is switched on can cause accidents.
Only charge the batteries in charges that are recommended by the manufacturer. A charge that is designed for a
certain type of batteries may pose a re risk if it used with other types of batteries.
Use only the correct batteries in the electric tools. The use of other batteries may result in injuries and re risk.
Keep unused batteries away from paper clips, coins, keys, nails screws and other metallic objects that could cause
a short circuit between the contacts. A short circuit between the battery contacts may cause burns or a re.
In case of incorrect use, uid may escape from the battery. Avoid contact with it. If you touch it by mistake, rinse
the aected area with water. If you get the uid in your eyes, also seek medical advice. Leaking battery uid can
cause skin irritation or burns.
6. SERVICE
Have your tool repaired only by authorized specialists using original replacement parts.
This will ensure that your tool remains safe to use.
ADDITIONAL SAFETY NOTES
The battery pack supplied with your cordless tool is not charged.
The battery pack has to be charged before you use the tool for the rst time
The battery pack does not reach its maximum capacitance until it has been charged and discharged approximately
ve times.
Battery pack lose their charge even when they are not being used. Regular charging is therefore recommended.
Please check the data marked on the rating plate of the battery charger. Be sure to connect the battery charger to
a power supply with the voltage marked on the rating plate. Never connect it to a dierent mains voltage.
Keep the battery charger and the cordless tool out of childrens reach.
Wear suitable work clothes. Wear safety goggles.
Never open the battery pack. Avoid contact with a leaking battery pack. In case of accidental contact wash the
aected area of skin with soap and water. If battery acids gets in your eye, rinse out the eye with clear water for at
least 10 minutes and seek a doctors advice immediately. Neutralize other aected areas with a mild acid such as
lemon juice or vinegar.
www.SereneLifeHome.com
3


Specyfikacje produktu

Marka: Pyle
Kategoria: Podcinacz
Model: PSLHTM25

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PSLHTM25, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Podcinacz Pyle

Pyle

Pyle PSLHTM25 Instrukcja

25 Września 2024

Instrukcje Podcinacz

Najnowsze instrukcje dla Podcinacz

Black & Decker

Black & Decker GL570 Instrukcja

15 Października 2024
Husqvarna

Husqvarna 236R Instrukcja

14 Października 2024
RYOBI

RYOBI One+ P20220 Instrukcja

9 Października 2024
Husqvarna

Husqvarna 110iL Instrukcja

9 Października 2024
Toro

Toro 51434 Instrukcja

8 Października 2024
Toro

Toro 51490 Instrukcja

8 Października 2024
Toro

Toro 51494 Instrukcja

8 Października 2024
Toro

Toro 51498T Instrukcja

8 Października 2024
Toro

Toro 51653 Instrukcja

8 Października 2024
Toro

Toro i51020 Instrukcja

8 Października 2024