Instrukcja obsługi Pyle PLR31MP

Pyle Radia samochodowe PLR31MP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PLR31MP (11 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
PLR31MP
www.pyleaudio.com
OWNER’S MANUAL
Mobile Audio/Video System
y RBDS (Radio Data System) Operation
y Automatic Memory Storing
y Detachable Panel
y Preset Equalization
y Memory Card Interface
y USB Interface
y Auxiliary Input Function
y Remote Control
1
CONTENTS
Installation ........................................... 3
DIN Front-Mount (Method A) ................. 3
Installing the unit ............................... 3
Removing the unit ............................. 3
DIN Rear-Mount (Method B) ................. 3
Using the detachable control panel .. 4
Wiring Connection .............................. 5
Operation ............................................. 6
Radio operation .................................. 7
USB operation ..................................... 7
Memory card operation ...................... 8
Remote control ................................... 9
Specification ....................................... 10
Trouble shooting ................................. 11
2
INSTALLATION
Notes:
y Choose the mounting location where the unit
will not interfere with the normal driving
function of the driver.
mounting location where the unit
will not interfere with the normal driving
function of the driver.
y Before installing the unit, connect the wiring
temporarily and make sure it is all connected
up properly and the unit and the system work
properly.
y Before installing the unit, connect the wiring
temporarily and make sure it is all connected
up properly and the unit and the system work
properly.
y Use only the parts included with the unit to
ensure proper installation. The use of
unauthorized parts can cause malfunctions.
y Use only the parts included with the unit to
ensure proper installation. The use of
unauthorized parts can cause malfunctions.
y Consult with your nearest dealer if
installation requires the drilling of holes or
other modifications of the vehicle.
y Consult with your nearest dealer if
installation requires the drilling of holes or
other modifications of the vehicle.
y Install the unit where it does not get in the
driver’s way and cannot injure the passenger
if there is a sudden stop, like an emergency
stop.
y Install the unit where it does not get in the
driver’s way and cannot injure the passenger
if there is a sudden stop, like an emergency
stop.
y Avoid installing the unit where it would be
subject to high temperature, such as from
direct sunlight, hot air, from the heater, or
where it would be subject to dust, dirt or
excessive vibration.
y Avoid installing the unit where it would be
subject to high temperature, such as from
direct sunlight, hot air, from the heater, or
where it would be subject to dust, dirt or
excessive vibration.
DIN FRONT-MOUNT (Method A) DIN FRONT-MOUNT (Method A)
Installing the unit Installing the unit
(1) Metal Strap (1) Metal Strap
Be sure to use the strap to secure the back of
the unit of the place. The strap can be bent by
hand to the desired angle.
Be sure to use the strap to secure the back of
the unit of the place. The strap can be bent by
hand to the desired angle.
(2) Mounting Bolt (2) Mounting Bolt
(3) Hex Nut (3) Hex Nut
(4) Spring Washer (4) Spring Washer
(5) Tapping Screw (5) Tapping Screw
(6) Plain Washer (6) Plain Washer
(a) Dashboard (a) Dashboard
(b) Holder (b) Holder
After inserting the holder into the dashboard,
select the appropriate tab according to the
thickness of the dashboard material and bend
them inwards to secure the holder in place.
After inserting the holder into the dashboard,
select the appropriate tab according to the
thickness of the dashboard material and bend
them inwards to secure the holder in place.
Removing the unit Removing the unit
Insert both of the supplied keys into the slots at
the middle left and right sides of the unit, then pull
the unit out of the dashboard.
Insert both of the supplied keys into the slots at
the middle left and right sides of the unit, then pull
the unit out of the dashboard.
DIN REAR-MOUNT (Method B) DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota, follow these
mounting instructions.
If your vehicle is a Nissan, Toyota, follow these
mounting instructions.
Use the screw holes marked T (Toyota), N
(Nissan) located on both sides of the unit to
fasten the unit to the factory radio mounting
brackets supplied with your vehicle.
Use the screw holes marked T (Toyota), N
(Nissan) located on both sides of the unit to
fasten the unit to the factory radio mounting
brackets supplied with your vehicle.
Factory Radio
Mounting Bracket
Dashboard or Console
Side View showing
Screw Holes marked
T, N or S
Screw
Screw
To fasten the unit to the factory radio mounting
brackets.
To fasten the unit to the factory radio mounting
brackets.
b
a
Align the screw holes on the bracket with the
screw holes on the unit, and then tighten the
screws (5x5mm) on each side.
Align the screw holes on the bracket with the
screw holes on the unit, and then tighten the
screws (5x5mm) on each side.
Note: the outer trim ring, sleeve and the metal
strap are not used for method B installation.
Note: the outer trim ring, sleeve and the metal
strap are not used for method B installation.

Specyfikacje produktu

Marka: Pyle
Kategoria: Radia samochodowe
Model: PLR31MP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PLR31MP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Radia samochodowe Pyle

Pyle

Pyle PLMR14BW Instrukcja

6 Grudnia 2024
Pyle

Pyle PLTS73FX Instrukcja

6 Grudnia 2024
Pyle

Pyle UPLMR15BW Instrukcja

6 Grudnia 2024
Pyle

Pyle PLTS79DUB Instrukcja

6 Grudnia 2024
Pyle

Pyle PLMR7BTW Instrukcja

6 Grudnia 2024
Pyle

Pyle PLCD14MRKT Instrukcja

27 Września 2024
Pyle

Pyle PLDN70U Instrukcja

23 Września 2024
Pyle

Pyle PLR31MP Instrukcja

3 Września 2024
Pyle

Pyle PLCD15MR Instrukcja

3 Września 2024
Pyle

Pyle PLMR90UW Instrukcja

31 Sierpnia 2024

Instrukcje Radia samochodowe

Najnowsze instrukcje dla Radia samochodowe

Boss

Boss MR63UAB Instrukcja

11 Grudnia 2024
Alpine

Alpine MRP-M850 Instrukcja

8 Grudnia 2024
Alpine

Alpine CTA-1505R Instrukcja

8 Grudnia 2024
Pioneer

Pioneer AVH-A240DAB Instrukcja

7 Grudnia 2024
Audio-Technica

Audio-Technica AT-RX80 Instrukcja

6 Grudnia 2024
Muse

Muse M-205 BT Instrukcja

5 Grudnia 2024
Kenwood

Kenwood KDC-130UG Instrukcja

4 Grudnia 2024
Kenwood

Kenwood KDC-X5200BTM Instrukcja

4 Grudnia 2024
JVC

JVC KD-R90BT Instrukcja

15 Października 2024
Kenwood

Kenwood KMM-X705 Instrukcja

15 Października 2024