Instrukcja obsługi Pyle PLDVRCAM44

Pyle kamera cofania PLDVRCAM44

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PLDVRCAM44 (8 stron) w kategorii kamera cofania. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
PLDVRCAM44
Dual Camera Video Recording System
with Full HD 1080p
USER MANUAL
VEHICLE DVR DASH CAM KIT
www.PyleUSA.com
2
BASIC KEY FUNCTION
1. Mode Button
A: Press Mode button to switch Video / Photo /playback
mode in standby;
B: Short press to lock current video le while recording.
2. Up Button
A: In standby, its used to switch between the front camera
and rear camera.
B: In setting menu, its used to select the marker.
3. OK Button
Conrmation button.
A: Short press to start and stop recording; Or short press to
turn on screen in screen saver.
B: Long press to power on and shut down
www.PyleUSA.com
3
4. Down Button
A: Short press to turn on/o audio recording.
B: To select the marker in setting menu
5. Menu Button
Short press to pull out the setting menu.
Installation Guide
1. Before power on, insert micro SD card into device. Please
use high speed micro SD card (Class 10 or above), capacity
no less than 8GBMaximum support card up to 32GB.
2. Install the suction cup mount and mount it near the
rearview mirror (recommended)
3. Plug the original car charger into the car cigarette lighter.
4. Connect the car charger to the camera and route the
cable. (along the edge of the windshield.)
5. Installed the rear camera near the license plate, (be careful
with the direction of the camera) Cable can be UP/DOWN
laid along the vehicle roof, after the installation, connect
the rear camera with the main device.
6. Start the engine, the camera should power on
automatically, and check the installation angle and other
functions.
Attention:
1. Please check the rear camera image to ensure proper
direction.
2. The installation requires some professional skill, if you are
not familiar with such work, you can go to the auto shop.
Function Introduction
1. Auto recording feature
With the car engine starts up, the camera will automatically
power on and start recording, charging indicator lights and
video indicator lights blinking. After the engine turns o,
the camera will automatically saves record les and shut


Specyfikacje produktu

Marka: Pyle
Kategoria: kamera cofania
Model: PLDVRCAM44

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PLDVRCAM44, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kamera cofania Pyle

Pyle

Pyle PLCM4340 Instrukcja

6 Grudnia 2024
Pyle

Pyle PLCMTR71 Instrukcja

10 Września 2024
Pyle

Pyle PLCMDVR47 Instrukcja

7 Września 2024
Pyle

Pyle PLCM19 Instrukcja

7 Września 2024
Pyle

Pyle PLCM7800 Instrukcja

6 Września 2024
Pyle

Pyle PLCMH6 Instrukcja

6 Września 2024
Pyle

Pyle PLCM2720.5 Instrukcja

5 Września 2024
Pyle

Pyle PLCM4LED Instrukcja

3 Września 2024
Pyle

Pyle PLCMTR74 Instrukcja

1 Września 2024
Pyle

Pyle PLDVRCAM71.5 Instrukcja

1 Września 2024

Instrukcje kamera cofania

Najnowsze instrukcje dla kamera cofania