Instrukcja obsługi Pyle PLCD23A

Pyle Radia samochodowe PLCD23A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PLCD23A (12 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

SPECIFICATIONS

GENERAL

Supply Voltage DC 12V. Negative Ground

Current Consumption Max.7A

Power Output 4 X 7Watts.

Number of channels 2 STEREO channels.

Unit Dimensions 178[W] X 154[D] X 50[H] mm.

FM SECTION

Frequency range 88MHz -108MHz

Effective sensitivity 10uV.

I.F Frequency 10.7MHz.

AM(MW) SECTION

Frequency range 530KHz - 1700KHz

RCA LINE OUT

Output CD Max. 800mV.

CD PLAYER

System Compact Disc Audio System.

Suitable CDs CD, CD-R, CD-RW Disc.

Frequency characteristics 40Hz-100Hz < 5dB

10KHz-20KHz < 5dB.

S/N Ratio to CD 60dB [1KHz]

Specifications subject to change, forgive without notification.

INSTRUCTION MANUAL

THEFT DETERRENT DETACHABLE SYSTEM

AUTO-LOADING DISC COMPACT DISC PLAYER

AM/FM STEREO 2-BAND TUNING RECEIVER

PLCD23A

www.pyleaudio.com

Detachable Front Panel CAR Radio & CD Player

TUNE

OPEN

POWER

MHz

ST/INT BND/RPT

AUX IN

LOC/RDM

EJECT

SEL

MODE/LOUD/MUTE

CO MPACT

DIGITAL AU D IO

Page 1 Page 10

Thank you for purchasing this car audio product.

Please read this manual carefully before operating this car audio product.

Please keep this manual for future use. It will be helpful to you if you are encounter any

operational problem.

WARNING!

To reduce the risk of fire or electric shock, do not use the unit in the rain or moisture

environment.

To prevent direct exposure to laser beam, do not try open the enclosure.

Visible and invisible laser radiation when open and interlocks defeated.

To protect our environment, do not dispose of electrical equipment in the domestic waste.

Please return any electrical equipment that you will no longer use to the collection points

provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human

health. This will contribute to the recycling and other forms of reutilization of electrical and

electronic equipment. Information concerning where the equipment can be disposed of can

be obtained from your local authority.

Selecting fine audio equipment is only the start of your musical enjoyment.

Now it is time to consider how to maximize the enjoyment you will get from

knowing how to work your new car stereo receiver.

We hope you enjoy using this product and encourage you to always listen at

a moderate, safe sound level to avoid any possible hearing damage or loss.

If you listen to excessively loud sound over time, your hearing can adapt to

higher volumes and what sounds "normal" to you may be quite harmful and

can cause you to have permanent hearing loss. So please practice "safe sound"

and always listen at moderate sound levels only.

Start with your volume control at the lowest setting, and slowly increase the level

until you can hear it comfortably and clearly, free from distortion.

Once you have established this comfortable sound level, leave it there.

Preface

INSTALLATION METHOD

FRONT PANEL

PLASTIC TRIM RING

UNIT CHASSIS

To remove the CD player out of the mounting sleeve,

insert the two supplied keys into the left and right side

slots of the chassis at the same time.

Then pull the chassis out of the mounting sleeve as

shown in the illustration.

This is an anti-theft installation method.

The main unit wears a METAL MOUNTING SLEEVE.

Please connect the wiring, eg, the Power supply, the Speakers and the Antenna

according to the requirements of this Instruction Manual, then install the

metal mounting sleeve into the car as per the diagram illustrated below.

To raise the anti-skip capability of the unit,

please ensure the metal support strap is

connected firmly to the car chassis.

METAL MOUNTING SLEEVE

DASHBOARD

Bend the tabs on the mounting

sleeve against the dashboard

with a screwdriver.

NOTE

Before installing and operating

the CD player, remove the metal

mounting sleeve illustrated by the

arrows.

Remove the two screws that

protect the CD player during

transportation before

operating the player.

To attach the removable faceplate,

insert the right side of the faceplate

into the right of the CD player chassis

first. Then push the left side of the

faceplate into the chassis until you hear

it click” ”.

METAL SUPPORT STRAP

Specyfikacje produktu

Marka:	Pyle
Kategoria:	Radia samochodowe
Model:	PLCD23A
Kolor produktu:	Blue,Orange,Purple,Red,Yellow
Typ produktu:	Complex playground
Wysokość produktu:	2060.4 mm
Szerokość produktu:	1753.4 mm
Głębokość produktu:	3378.2 mm
Szerokość opakowania:	1279.9 mm
Wysokość opakowania:	880.1 mm
Głębokość opakowania:	2100.1 mm
Zalecany wiek (min):	3 lat(a)
Zjeżdżalnia do placu zabaw:	Tak
Huśtawka do placu zabaw:	Nie
Chodnik do placu zabaw:	Nie
Piaskownica do placu zabaw:	Nie
Ścianka wspinaczkowa do placu zabaw:	Tak
Tworzywo ramy:	Plastik
Maksymalne obiążenie:	360 kg