Instrukcja obsługi Pyle PHRM56
Pyle
SmartWatch
PHRM56
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PHRM56 (1 stron) w kategorii SmartWatch. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
The Pyle
Thank you for choosing the Pyle as your personal trainer. In order to be able to
make the best use of this device, please read the instruction manual carefully.
Do not discard, keep the manual for future reference.
The requires CR2032 x 2PCS lithium batteries. Only the recommended Pyle
batteries are to be used.
When replacing the batteries, the following are to be strictly observed.
1)Only adults should install and replace the batteries.
2)DO NOT use rechargeable batteries.
3)Exhausted batteries should be removed from the Pyle.
Features
· Time/Date
· Present Heart Rate
· Maximum Heart Rate
· Average Heart Rate
· Target Zone Setting
· 1/100 sec Stopwatch
· Calories Burnt
· Daily Alarm
· User Setting
· EL Backlight
· Energy Saving Function – Auto Display Off
Wear the Heart Rate Belt on your chest with the sensor over your heart for detection
of the heart rate.
We will notice that there are two noticeably different patches on the inside of the Heart
Rate Belt. These are the sensors for detecting your Heart Rate. Before you put the Heart
Rate Belt, wet these two patches lightly so that the sensors can detect your heart rate
more easily, faster and more accurately.
Time/Date Function
1) To set the time and date, press the “ ” button till you get to the time/date function.Mode
2) Press and hold the “ ” button for 3 seconds then the year digits would start flashing.Set
3) Adjust your year by pressing the “ ” (to count down) or “ ” (to count up)Set Start / Stop
4) When the year is set, press the Mode button and the month-digits will then flash. Now
press“ ” button (to count down) or “ ” button (to count up).Set Start / Stop
5) When the month is set, press the Mode button and the day-digits will then flash. Now
press“ ” button (to count down) or “ ” button (to count up).Set Start / Stop
6) When the day of the month is set, press the Mode button and the hour-digits will then
flash.Now press “ ” button (to count down) or “ ” button (to count up).Set Start / Stop
7) When the hour of the day is set, press the Mode button and the minute-digits will then
flash. Now press “ ” button (to count down) or “ ” button (to count up).Set Start / Stop
8) When the minute of hour is set, press the Mode button and the hour-digits will then
flash appear.
9) When the time mode is selected, press Mode button to set the time and date. Noted
that the day of the week is displayed at the bottom of the watch and will be
automatically set according to the date and year selected.
10) Press “ ” button to select the 24-hour or the 12-hour. The “ ” icon representSet
nighttime and the “ ” icon represent daytime.
Note: If no changes (adjustments) are made after 1 minute, it will automatically return
to the main display.
Present Heart Rate
1) Press the “ ” key till you have got to the present Mode
heart rate function located on the main display, below the
time/date function.
2) Wait for the “ " to reach the heart rate watch and
your heart rate should appear in a few seconds.
Maximum Heart Rate Mode
The maximum heart rate mode records your highest ever
heart rate and if you have a even higher heart rate then your
previous record, it will replace the old one and only the new
will be shown on the highest heart rate mode.
1) Press “ ” till you get to the highest heart rate modeMode
that is below the time/date function.
2) Press the “ ” button again till you see the word max Mode
next to the heart rate section like this. Then it will tell you
your maximum heart rate.
Average Heart Rate
The average heart rate records your average heart rate and
it is changed as you use it more often on average heart rate
replacing the other as you use it more.
1) Press the “ ” key till you get to the average heart Mode
rate that is below the time/date function.
2) Press the “ ” button once and you ’ll see the AVG Mode
next to the display of heart rate.
Then you ’ll see you average heart rate.
Note: The heart rate ranges from the lowest of 35 and the
maximum of 250.
Zone Setting
This parameter sets the intensity of your exercise, and thus
monitors your heat rate according to your zone selection.
You may also choose to turn the zone alarm on, in which
case the devise will beep if your instantaneous heart rate is
not within the target zone.
1) First go to the Zone Setting by pressing the button.Mode
2) The words ' ' will be displayed and flashing, status of - H -
the zone alarm is ON.
Press again the button and zone alarm will be OFF Set
and the words ' ' will not flash. - H -
3) Press and hold the button when the zone alarm Set
is ON in order to go to the High Zone Setting mode. You will
see the bottom range value of the BPM will appear flashing.
Now press the button (to count-up) or the Start / Stop
Set button (to count down).
By pressing either the or the button once,Start / Stop Set
the value will go up or down respectively by one unit. If
you press and hold either the or the button,Start / Stop Set
the value will continue counting up or down until you
release the button. When you have come to the desired
value for the bottom range, press the button to Mode
confirm your High Zone setting and the bottom range value
of the BPM will stop flashing.
4) Press again button in order to go to the LowMode
Zone Setting. The words ' ' will be displayed and - L -
flashing, status of the zone alarm is ON. Press again
the button and zone alarm will be OFF and the Set
words ' ' will not flash. - L -
5) Press & hold the button when the zone alarm is Set
ON in order to go to the Low Zone Setting mode.
You will see the bottom range value of the BPM will
appear flashing.
Now press the button (to count-up) or Start / Stop
the button (to count down). Set
By pressing either the or the button Start / Stop Set
once, the value will go up or down respectively by one
unit. If you press and hold either the or Start / Stop
the button,the value will continue counting up or Set
down until you release the button. When you have
come to the desired value for the bottom range, press
the button to confirm your Low Zone setting and Mode
the bottom range value of the BPM will stop flashing.
6) Note that the Target Zone setting of the Heart Rate
Monitor has been defaulted High Zone with 160 BPM
and Low Zone with 80 BPM ( Range : 35 – 250 BPM )
Stopwatch / Calories Burnt
1) Press the “ ” key till you get to the stop watch Mode
function.
2) To start the stopwatch, press the “ ” key.Start / Stop
3) Press again the “ ” key to take the lap Start / Stop
counting and “ ” will be flashing and counting continued. :
4) To stop the stopwatch, press the “ ” key. PressSet
“ ” key to start again the stopwatch.Start / Stop
5) You can check your calories burnt by press the “ ” Set
key when the stop watch is stopping or in the lap
counting mode.
Press “ ” key to go back the stop watch Start / Stop
function and stop watch will start again
Press “ ” key to go back to the stop watch function.Set
6) To reset, press & hold the “ ” key and all the data Set
will reset to zero.
7) Measuring Unit : 1/100 second , Measuring
Capacity : 23 hr 59 m 59s
8) Calories Unit : 1 Kcal , Measuring Capacity : 19999.99
4 Press the “ ” button to check your Set Maximum heart
rate record
5. Press again the “ ” button to check the Set Heart Rate Ratio
6. Press the “ ” button in any time to go back toMode
Time/Date Mode.
Noted : You need to enter the toUSER SETTING MODE
configure your personal information settings before use.
IMPORTANT BATTERY INFORMATION
Battery installation and removal should be performed by an adult
Use only batteries recommended in this instruction sheet
Be sure to install the batteries with the correct polarity, as indicated
Remove all batteries when replacing
Only batteries of the same and equivalent type as recommended are to be used
Do not short-circuit the supply terminals
Exhausted batteries should be removed from the product
Non-rechargeable batteries are not to be recharges
Rechargeable batteries are to be removed from the product before being charged
Rechargeable batteries are only to be charged under adult supervision
Different types of batteries or new and used batteries are not to be mixed.
CAUTION
Should you encounter any problems with the Pyle (e.g. malfunctioning of a
parameter, static electricity, interferences within the product or the need to re-set the
device), please press the reset button to reset the watch. All data previously input into
the device shall be deleted and you can then/will need to re-set the watch all over again.
Should this fail to correction the situation, remove the batteries and then put them back
into the battery compartment. Then follow all the steps mentioned above in order to
input the necessary data once more. The content of this manual is subject to change
without further notice. Due to printing limitation, the displays shown in this manual may
differ from the actual display. The manufacturer and its suppliers hold no responsibility
to you or any other person for any damage expenses, lost-profits, or any other claims
arisen by using this product. The contents of this manual may not be reproduced without
permission of the manufacturer.
Press The
Reset Button
Daily Alarm
1) Press “ ” till you get to the alarm function.Mode
2) To set your alarm, Press and hold the “ ” button for Set
3 seconds and the hour digit should start flashing.
3) Adjust your hour of the alarm by pressing the “ ” Set
button (to count down) or the “ ” button (to Start / Stop
count up).
4) Then press the “ ” button to set the next part of Mode
the setting which is the minutes.
And once again, press either the “ ” button (to Set
count down)or the “ ” button (to count up)Start / Stop
5) Press the “ ” button to complete the setting of Mode
the alarm.
6) To activate or deactivate the alarm “ ”, press the
“ ” button.Set
User Setting / Maximum Heart Rate Record
1 ) Press “ ” button till you get to the User Setting Mode
function and you can set your Age
Press the “ ” button (to count-up) to set Start / Stop
your Age. If you press and hold the “ ” button, Start / Stop
the value will continue counting up until you release
the button. When you have come to the desired value,
press the “ ” button to confirm your setting and enter Set
next setting – Weight
Default : 16, Range : 5 to 99
2 ) Press the “ ” button (to count-up) to set Start / Stop
your . If you press and hold the “ ”Weight Start / Stop
button, the value will continue counting up until you
release the button.
When you have come to the desired value, press
the “ ” button to confirm your setting and enter nextSet
setting – VO2max
Default : 50kg, Range : 20 to 199kg
3 ) Press the “ ” button (to count-up) to set your Start / Stop
VO2max. If you press and hold the “ ” button, Start / Stop
the value will continue counting up until you release
the button.
When you have come to the desired value, press the
Set “ ” button to confirm your setting and enter your
Maximum heart rate record
Default : 40, Range : 10 to 94
MODE SET
EL START/STOP
Diagram 1
Diagram 2 Diagram 3
SCREW
BACK COVER
O Ring
CR2032
BATTERY
Energy Saving Function – Auto Display Off
If the chronograph / timer is in stop state, in any non setting mode, the time reaches
12:00am will enter Display Off mode. Press “ ” key to turn on display and enterMODE
Time/Date mode.
Installing the Battery
The Heart Rate Monitor uses 2 pcs CR2032 lithium batteries .Use only the recommended
batteries.
Pyle
1) The batteries compartment is located at the back of the Pyle. To install/replace
the batteries, un-screw the back cover by screw driver. (Diagram 1)
2) Take out the old batteries and dispose of properly.
3) Insert the new batteries, making sure that the poles are correctly placed.
4) Screw back the back cover.
Heart Rate Belt
1) Hold the Heart Rate Belt firmly. Insert a coin into the slit of the compartment lid and turn it
clockwise. The lid should come off easily.(Remove used battery CR2032)(Diagram 2)
2) Gently place the battery into the battery slot of the battery compartment.(Diagram 3)
3) Put the compartment lid back into place and tighten it firmly by turning it anti-clockwise
with the help of coin.
73-242-0001
www.pyleaudio.com
PHRM56
Specyfikacje produktu
| Marka: | Pyle |
| Kategoria: | SmartWatch |
| Model: | PHRM56 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Pyle PHRM56, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje SmartWatch Pyle
6 Grudnia 2024
3 Lipca 2024
Instrukcje SmartWatch
- SmartWatch Sony
- SmartWatch Samsung
- SmartWatch LG
- SmartWatch Motorola
- SmartWatch Beurer
- SmartWatch Xiaomi
- SmartWatch MyPhone
- SmartWatch Huawei
- SmartWatch TCL
- SmartWatch Lenovo
- SmartWatch Livoo
- SmartWatch SilverCrest
- SmartWatch Acer
- SmartWatch Realme
- SmartWatch Xblitz
- SmartWatch Epson
- SmartWatch Nokia
- SmartWatch Mio
- SmartWatch Withings
- SmartWatch Asus
- SmartWatch Nedis
- SmartWatch Medion
- SmartWatch Polar
- SmartWatch Niceboy
- SmartWatch Garmin
- SmartWatch Blaupunkt
- SmartWatch Vivax
- SmartWatch Casio
- SmartWatch Alcatel
- SmartWatch Sigma
- SmartWatch Prixton
- SmartWatch Honor
- SmartWatch Amazfit
- SmartWatch SBS
- SmartWatch Medisana
- SmartWatch Cobra
- SmartWatch Fitbit
- SmartWatch Crane
- SmartWatch Oppo
- SmartWatch Krüger&Matz
- SmartWatch Renkforce
- SmartWatch Qilive
- SmartWatch Skagen
- SmartWatch Manta
- SmartWatch Apple
- SmartWatch Vtech
- SmartWatch Suunto
- SmartWatch BEMI
- SmartWatch Forever
- SmartWatch Michael Kors
- SmartWatch Razer
- SmartWatch GoClever
- SmartWatch Bryton
- SmartWatch SPC
- SmartWatch Aiwa
- SmartWatch IGPSport
- SmartWatch Oregon Scientific
- SmartWatch Mibro
- SmartWatch OnePlus
- SmartWatch Jay-Tech
- SmartWatch Hama
- SmartWatch Microsoft
- SmartWatch Armodd
- SmartWatch TomTom
- SmartWatch Denver
- SmartWatch Bushnell
- SmartWatch Tracer
- SmartWatch Media-Tech
- SmartWatch Trevi
- SmartWatch Technaxx
- SmartWatch Garett
- SmartWatch Overmax
- SmartWatch ADE
- SmartWatch Allview
- SmartWatch Lamax
- SmartWatch X-WATCH
- SmartWatch Oromed
- SmartWatch Alpina
- SmartWatch Aligator
- SmartWatch Archos
- SmartWatch ACME
- SmartWatch Calypso
- SmartWatch Diesel
- SmartWatch Doro
- SmartWatch Nilox
- SmartWatch Emporio Armani
- SmartWatch Brigmton
- SmartWatch Sunstech
- SmartWatch Belesy
- SmartWatch Soehnle
- SmartWatch MyKronoz
- SmartWatch Runtastic
- SmartWatch Naxa
- SmartWatch Umidigi
- SmartWatch G2
- SmartWatch Konig
- SmartWatch Mpman
- SmartWatch IHealth
- SmartWatch Valante
- SmartWatch Ematic
- SmartWatch Fossil
- SmartWatch Tikkers
- SmartWatch Iget
- SmartWatch COGITO
- SmartWatch Mondaine
- SmartWatch Ticwatch
- SmartWatch MOTA
- SmartWatch Hallofo
- SmartWatch Pebble
- SmartWatch Jawbone
- SmartWatch Otium
- SmartWatch ORA
- SmartWatch Martian
- SmartWatch Beafon
- SmartWatch Geonaute
- SmartWatch Guardo
- SmartWatch Fen (Fit Electronics Nutrition)
- SmartWatch Ninetec
- SmartWatch Swisstone
- SmartWatch Spotter
- SmartWatch One2track
- SmartWatch Sempre
- SmartWatch Sinji
- SmartWatch Kidswatch
- SmartWatch OOQE
- SmartWatch Growing
- SmartWatch Misfit
- SmartWatch Uwatch
- SmartWatch Setracker
- SmartWatch Immax
- SmartWatch Quadro
- SmartWatch SimWatch
- SmartWatch Xplora
- SmartWatch U8
- SmartWatch Kogan
- SmartWatch Guess
- SmartWatch Lookit
- SmartWatch Veadigital
- SmartWatch Nordval
- SmartWatch Xlyne
- SmartWatch Leotec
- SmartWatch Scinex
- SmartWatch Merlin
- SmartWatch FlinQ
- SmartWatch Stenlille
- SmartWatch Fibian
- SmartWatch Lintelek
- SmartWatch Qlokkie
- SmartWatch Perfect Choice
- SmartWatch Smartbook
- SmartWatch Galesto
- SmartWatch Canyon
- SmartWatch KoreHealth
- SmartWatch METAWATCH
- SmartWatch X-unknown
- SmartWatch Kronoz
- SmartWatch Mega P
- SmartWatch Motus
- SmartWatch Lifetrak
- SmartWatch JTC Jay-Tech
- SmartWatch MiTone
- SmartWatch Oura
- SmartWatch Cubot
- SmartWatch Bauhn
- SmartWatch Papago
- SmartWatch Kiprun
- SmartWatch Time 2
- SmartWatch INOC
- SmartWatch Dfit
- SmartWatch IZZO Golf
- SmartWatch Quazar
- SmartWatch Bea-fon
- SmartWatch DCU
- SmartWatch GlobalSat
- SmartWatch Spacetalk
- SmartWatch XCOAST
Najnowsze instrukcje dla SmartWatch
11 Grudnia 2024
11 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
9 Grudnia 2024
9 Grudnia 2024
9 Grudnia 2024