Instrukcja obsługi Pyle PDWM224BK

Pyle mikrofon PDWM224BK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PDWM224BK (3 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 32 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
www.PyleUSA.com
2www.PyleUSA.com 3
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION
Features:
• UHF Band Receiver System
• Quad Frequency 4-Channel Design (Channel 1, 2, 3, 4) Addressable Frequency
• Broad Frequency Response Range & Low Distortion
• High Signal/Noise Ratio Performance
• RF Signal Indicator on LCD Screen
• Radio Frequency Display on LCD Screen
• 1 XLR Output Connector Jacks (as only one receiver)
• Independent Channel Adjustable Frequency Controls
• Universal Portable Microphone System
What's in the Box:
• (4) Wireless Microphone
• (8) 'AA' Battery
• (1) USB to Micro USB Charging Cable
• (4) Plastic Microphone Anti-Drop Rubber Ring
• (4) Microphone Sponge
• (1) Microphone Receiver
• (1) 3.5mm Jack Audio Input Connector
• (1) 18650mA Battery
• (1) Plastic Case
Transmitter Technical Specs:
• Frequency Range: 500-938MHz
• Number of Channels: 16
• Oscillation Mode: DSP Chip Frequency Lock
• Stability: ±10ppm
• RF Power: 10dBm
• Audio Frequency Response: 40-18000Hz
• Distortion Degree: <0.5%
• Battery Type: 1.5V, 'AA' Alkaline Battery
• Battery Life: 4-8 Hours
Receiver Technical Specs:
• Frequency Response: 500-938MHz
• Use LCD Screen Display
• Oscillation Mode: DSP Chip Frequency Lock
• Stability: ±10ppm
• Receiving Sensitivity: -95-72 dBm
• Audio Frequency Response: 40-18000Hz
• Distortion Degree: <0.5%
• Signal To Noise Ratio: >90dB
• Audio Output: 300mv (Maximum)
Pairing (pairing ID code + pairing frequency):
The “Frequency Hopping Mode” is a brandnew operation mode introduced
by this program. The data is sent wirelessly by the hand microphone to the
receiver for pairing. After the pairing is successful, the frequency point of the
hand microphone will switch between these 10 frequency points.
The hand microphone can manually change the frequency at any time.
The receiver will automatically follow and jump to the corresponding frequency.
In this way, it not only solves the crosstalk problem, but also provides the
exibility of frequency setting. Products using frequency hopping have been
widely recognized by the market and meet the requirements of most products.
KTV rooms, hand boxes, teaching, personal entertainment and other occasions
to be applicable.
Performance and Characteristics
1. UHF 500MHz-938MHz frequency band is used.
2. Using one-dimensional code + frequency for data encryption and frequency
(even when the same frequency is used to receive, the internal chip and is
interfered by RF, it will only aect the connection range. If the two receivers
are separated by a certain distance (for example, 10 meters), the frequency
re-use can be considered.
3. With automatic mute and impact elimination circuit, help to avoid the impact
and noise of the mic switch.
www.PyleUSA.com
4www.PyleUSA.com 5
4. The hand microphone has an LED digital tube display function that can
intuitively display the current frequency.
5. The eective distance of wireless transmission is 50-80 meters.
6. The handheld microphone adopts lithium battery circuit design, with
overcharge and over-discharge protection.
7. The simple operation interface and few adjustable parts can completely
avoid malfunction caused by incorrect operation.
8. The transmitter has a low-voltage detection function.
When the battery voltage drops to 2.2V, the battery character ashes.
9. Extremely high pickup sensitivity and excellent sound quality make it easy
for you to speak or sing.
10. Multiple devices can be used at the same time, no interference and cross-
frequency phenomenon.
11. With power and wireless indicator lights.
Launch Function Indication:
Switching Frequency:
When powered , short press the hidden switch of the battery compartment ON
to switch one frequency at a time.
Paring:
Paring handheld A: When powered ON POWER, press and hold the button for
10 seconds to automatically skip to BCD.
Receiver Function Indication:
Sound Quality
This way of connection can achieve the sound quality eect as using wired
connection, its eect can be very close. No compression or expansion is
needed to preserve the original sound. The frequency response, transience
and linearity of the sound are excellent, very close to the sound quality of the
wired microphone.
Crosstalk
The wireless microphone uses all-digital wireless transmission chip which is
dierent from the tradional modulation and demoduation method which
keeps the sound real. The system’s transmitter and receiver chip uses digital
encryption for transmission even if the same frequency is used.
As long as the ID code is set dierently, there will be no crosstalk.
Switch
CHA frequency switch
on/o button
Battery cover open from here
Antenna
USB charging port
Power/charging indication

Specyfikacje produktu

Marka: Pyle
Kategoria: mikrofon
Model: PDWM224BK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PDWM224BK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon Pyle

Pyle

Pyle PDWM8225 Instrukcja

13 Października 2024
Pyle

Pyle PDWM2135 Instrukcja

7 Października 2024
Pyle

Pyle Pro PDWM2450 Instrukcja

6 Października 2024
Pyle

Pyle PDWM5900 Instrukcja

5 Października 2024
Pyle

Pyle PDWMU90 Instrukcja

2 Października 2024
Pyle

Pyle PSW101CM Instrukcja

2 Października 2024
Pyle

Pyle PSW770 Instrukcja

2 Października 2024
Pyle

Pyle PSWLE56 Instrukcja

2 Października 2024
Pyle

Pyle PSW115 Instrukcja

2 Października 2024
Pyle

Pyle PSMRS08 Instrukcja

26 Września 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Audio-Technica

Audio-Technica BP4073 Instrukcja

15 Października 2024
Power Dynamics

Power Dynamics PD524 Instrukcja

15 Października 2024
Audio-Technica

Audio-Technica AT4060 Instrukcja

14 Października 2024
Sennheiser

Sennheiser ew 100 G4-845-S Instrukcja

13 Października 2024
AKG

AKG WMS420 Instrukcja

13 Października 2024
Audio-Technica

Audio-Technica BP892xCH Instrukcja

12 Października 2024
Apart

Apart MDS.DEL Instrukcja

10 Października 2024
Behringer

Behringer Go Cam Wireless Instrukcja

9 Października 2024
BOYA

BOYA BY-V4 Instrukcja

9 Października 2024
BOYA

BOYA BY-WM3T Instrukcja

9 Października 2024