Instrukcja obsługi Pyle PDMICKT34

Pyle mikrofon PDMICKT34

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle PDMICKT34 (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
www.PyleUSA.com
Featu
Includes (3) Handheld Microphones & (3) XLR Audio Cables
Built-in Acoustic Pop Filters
Ultra-Wide Frequency Response
High Signal Output for Vocals & Singing
Rugged Construction & Steel Mesh Grill
Reinforced Sound Cartridge
ON/OFF Switch for Stage Control
Perfect for Stage Performances or In-Studio Use
Technical Specs:
Mic Element: Hyper-Cardioid
Pickup Pattern: Unidirectional Moving Coil
Mic Construction Material: Zinc Alloy
Audio Cable Connectors: XLR to 1/4’
XLR Cable Length: 26’+ Ft.
Open Circuit Sensitivity: -54 dB
Frequency Response: 60Hz-15kHz
Output Impedance: 600 Ohm, +/-3dB (0dB=1V/Pa @ 1kHz)
Mic Dimensions (L x W): 6.7’ x 1.8’ (-Each)
Mic Weight: 0.61 lbs. (-Each)
Visit Our Website
SCAN
PyleUS
USER GUIDE
Dynamic Microphone Kit
Cardioid (at 1KHz)
WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov
Connecting and Disconnecting the
Microphone Cable
1. Connecting the Cable: Insert the XLR
connector into the microphone.
If necessary, rotate the connector to
align the key on the connector with the
groove in the microphone. Push the
connector into the microphone until it
clicks, indicating a secure connection.
2. Disconnecting the Cable:
To disconnect the cable from the
microphone, grasp the connector while
depressing the tab. Gently pull the
connector away from the microphone
to release it.
Usage Guidelines
1. Optimal Placement: For the best gain-
before-feedback and isolation from
undesired background noise, aim the
microphone toward the sound source
and away from unwanted sound
sources.
Cautions
1. Feedback Prevention: If the head of
the microphone is covered by your
hand or brought close to the speaker,
a howling sound may be generated.
To prevent this, rst decrease the
volume, then position the microphone
so that it is not pointed towards the
speaker and there is sucient
distance between the microphone
and the speaker.
2. Maintenance of the Grille and
Windscreen: It is important to keep
foreign particles out of the grille and
the windscreen as they may alter the
frequency response of the microphone.
Clean the grille periodically using
warm, soapy water. Rinse with plain
water and let it dry completely before
replacing.
3. Due to Handling the Microphone:
the high sensitivity of the cartridge,
avoid dropping it from a height or
applying strong shocks to it.
4. Environmental Conditions:
To maintain the sensitivity and quality
of sound reproduction, avoid exposing
the microphone to moisture and
extreme t
2. Do not cover any part oHandling the Microphone:
the grille with your hand. Covering the grille alters th
sound and distorts the polar pattern, increasing the
chance of feedback.
Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
PyleUSA.com/ContactUs

Specyfikacje produktu

Marka: Pyle
Kategoria: mikrofon
Model: PDMICKT34

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle PDMICKT34, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą