Instrukcja obsługi Pyle Pro PYD1964B


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pyle Pro PYD1964B (6 stron) w kategorii Sprzęt DJ-ski. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
www.PyleAudio.com
PYD1964B
6-Channel Bluetooth DJ Mixer
USER MANUAL
Do not opern cover (or back cover) to reduce the risk of electric shock or fire. The
User serviceable parts inside. Refere servcing to qualified service personnel.
This symbol is used to alert the operator to the presence of important operating in
And precautions detailed in the documentation manual.
This symbol is used to warn operators that uninsulated dangerous voltages are p
Within the products enclosure that may pose a risk of electric shock.
Warning: To avoid fire or risk of electric shock, do not expose this unit to rain or moisture.
Notes:
Make sure power outlets conform to the power requirements listed on the back of the unit
Main Voltage must be correct and the same as that printed on the rear of the unit.
Do not use the unit if the electrical cord is frayed or broken.
The unit shall not be exposed to dripping or splashing and no objects filled with liquids, s
be placed on unit.
The unit shall be connected to a mains socket outlet with a protective earth ground conne
Do not use equipment if Power plug is damaged, smashed, bent or pinched.
Warning:
Using, adjusting or changing program control beyond this specification may cause dange
The unit should be serviced by qualified service personnel.
When repairing, use only same specification parts.
Notes:
Select the voltage requirement by adjusting the voltage selector switch at the rear panel.
Make sure that the power of the equipment is off and disconnected from the main voltag
the voltage selector to the required setting. We will not be responsible for damages arising
installation, wiring or operation due to the fault or negligence of the user.
5) Water and moisture --- Position of the unit away from water or any kind of moisture.
6) Carriage and rack --- The unit should be fitted to h carriage and rack that matc the manufac
Please be careful with carriage while moving the unit.
7) Heat should not be near heat sources such as radiator, stove and amplifier etc. --- Device
8) Power supply The unit only operate rated power supply. Please ask de--- s with proper
supply company if you are unsure what pe of power supply. If operating with batteries or o ty
please refer to this booklet.
9) Connection ground or polarization Perhaps this unit has a polarization AC plug. This---
direction of insertion Please insert properly for. safety.
10) DO not smash, pinch or try to repair power cord.
11) Clean --- Clean this unit with a soft cloth. Prevent water from entering unit through openin
12) For device with AC power cord, check AC plug sheet and all of exposed metal parts wit
using, and resistance ought to be more than 100K ohm.
13) Long period of non-use--- Unplug the power cord if the unit is not used for a long time
14) Prevent solid and liquid into unit s s from entering – BE CAREFULL, DO NOT INSERT SO
LIQUID TRHOUGH OPENINGS OF UNIT.
15) IF BROKEN OR NEEDS REPAIR --- In case of following problems, refer to qualified serv
A) Power cord or plug mangled or damaged
B) Solid or liquid has entered the casing of the unit
C) The unit was exposed to rain or extreme weather
D) Device does not function properly
E) The unit has fallen or is broken if casing is damaged, or
16) R Operate according to instructions, do not try to open or repair unit. All of abovepair ---
referred to qualified service personnel
17) Ventilation The function of ventilation holes in unit are for air circulation and cooling--- . I
reliability and prevents overheating. Do not block or cover air ways Do not place unit on be.
similar surface. Do not place this unit in an enclosed area such as an enclosed cabinet or lo,
18) Accessories --- Do not use parts that manufacturer does not recommend in order to avoid
19) Auxiliary equipment Do not place this unit on unstable shelf, tripod or table. It--- mobile
harm to child or adulren ts if the unit falls. Please use mobile shelves or table, tripods s
recommends.
20) Preventing lightning strike ---Add lightning protection to all outdoor antennas and use sur
unit is not used for a long time, unplug the power cord.
21) Replace parts if the unit requires replacement ou must replace with manufactu--- spart , y
or compatible part.
22) All repairs and changes to unit must be performed by qualified technician to assure prope


Specyfikacje produktu

Marka: Pyle Pro
Kategoria: Sprzęt DJ-ski
Model: PYD1964B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pyle Pro PYD1964B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Sprzęt DJ-ski Pyle Pro

Instrukcje Sprzęt DJ-ski

Najnowsze instrukcje dla Sprzęt DJ-ski

Festo

Festo CPX-E-CEC-M1 Instrukcja

9 Października 2024
BeamZ

BeamZ StarFuzer Instrukcja

9 Października 2024
Yamaha

Yamaha MW10 Instrukcja

8 Października 2024
Vocopro

Vocopro KRS-3808 PRO Instrukcja

7 Października 2024
Korg

Korg DT-10 Instrukcja

7 Października 2024
Nektar

Nektar CS12 Instrukcja

5 Października 2024
Ortofon

Ortofon OM 5S Instrukcja

5 Października 2024
Vocopro

Vocopro UMH-5805 Instrukcja

5 Października 2024
UDG Gear

UDG Gear Urbanite Instrukcja

5 Października 2024