Instrukcja obsługi Pulse ShowerSpas 1010


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pulse ShowerSpas 1010 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Adjustable Slide Bar
Model #1010
Owner's Manual
SLIDE BAR
2
14
15
12
13
11
10
10
9
9
8
8
7
7
6
G
22 5/8" (575 mm)
M
J
I
H
(Not Included)
Adjustable Slide Bar Installation
1. Hold Adjustable Slide Bar (6) in desired mounting
location. Evaluate range of adjustment and potential
interference of handshower hose (15) (Diagram G).
2. Mark wall for two mounting holes. Before drilling
ensure no live plumbing could be damaged.
3. Slowly drill 1/4" (6mm) wide by 1" (25mm) deep
holes 22 5/8 inch (575mm) apart. Make sure holes are
plumb.
IMPORTANT: Supplied anchors are for solid surface
only i.e. tile, marble etc. If mounting to
hollow or fiberglass wall a different an-
chor/screw and hole size may be required.
4. Insert wall anchors (10) until flush with wall. Slide top
mount (7) over slide bar (Diagram H) and secure with
screw (8) (Diagram I).
5. Slide soap dish (12) (Diagram J) onto slide bar and
tighten set screw (11).
5. Slide lower mount (7) over slide bar and secure with
screw (8).
6. Press covers (9) into mounts (7) (Diagram M).
7. Place washer (14) in hex head of hose (15) and con-
nect to diverter outlet. Place washer (14) in smooth end
of hose and connect handshower (13). Place handshow-
er into holder. Handshower (13), washer (14), and hose
(15) not included.


Specyfikacje produktu

Marka: Pulse ShowerSpas
Kategoria: Niesklasyfikowane
Model: 1010

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pulse ShowerSpas 1010, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Pulse ShowerSpas

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane