Instrukcja obsługi PTZ Optics PT-JOY-G4

PTZ Optics sterownik PT-JOY-G4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla PTZ Optics PT-JOY-G4 (22 stron) w kategorii sterownik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/22

A 4th-Generation Network or Serial Camera Controller

PT-JOY-G4

User Guide

V1.1

Please check ptzoptics.com for the most up to date version of this document

Thank You!

Thank you for selecting our joystick camera controller built to support either IP or serial communication.

As you read through this manual it will help identify the options you have for setting up the device,

connecting equipment as well as recommended configurations; as a result we recommend reading over

this guide prior to beginning any setup to have the best possible experience.

-The PTZOptics team

Using this guide to Get Started

We recommend that you read the entire user guide prior to any setup and please refer to the Table of

Contents when attempting to locate specific product information or setup instructions.

The entire contents of this manual / guide, whose copyright belongs to PTZOptics, may not be cloned, copied,

or translated in any way without the explicit permission of the company. The product specifications referred to

in this document are for reference only and as such are subject to updating at any time without prior notice.

Rev 1.1 9/21

What’s in the Box?

● PT-JOY-G4 joystick controller

● 12V 2A international power supply

● 8’ (2.4m) RS-232C / DB9 female to 8-pin mini-din male cable

● PTZOptics PT-JOY-G4 Quick Start Guide

● Grounding Pin

Introducing the PT-JOY-G4

The PT-JOY-G4 is designed to provide in depth control of the PTZOptics and HuddleCamHD line of cameras

for use in production environments and more. With the ability to support either IP or Serial control from a single

controller, the PT-JOY-G4 presents itself as a flexible control solution.

When used via a Local Area Network (LAN), you can connect to cameras using TCP or UDP communications

to send PTZOptics VISCA over IP commands, with limited support for Sony VISCA over IP capable cameras. If

using the serial connections via RS-232, RS-485 or RS-422 you have PTZOptics VISCA commands, Pelco-D,

Pelco-P and limited Sony VISCA support.

Note using this with non PTZOptics or HuddleCamHD products may offer limited or no control capabilities.

You can view the PTZOptics VISCA and VISCA over IP command libraries at

ptzoptics.com/downloads/

How to care for your PT-JOY-G4

Please read the recommendations below to ensure you do not damage the product or possibly void your

warranty.

● Keep the joystick away from rain and out of moist environments

● Do not remove any portions of the case, cover or interfaces

○ Removal may result in the risk of an electrical shock

○ Removal will void the manufacturer's warranty.

● Only use the product within the recommended temperature and humidity ranges

○ Operating temperature range: 14° ~ 122°F (-10° ~ +50°C)

○ Operating humidity range: 10 ~ 90% *Non-condensing

● Do not use any other power supply than the one originally supplied with the joystick.

● Keep the joystick and signal cables away from strong electromagnetic sources or abnormal and

unreliable control may be experienced

● If you need to clean the surface of the product please use a soft dry cloth.

○ If the joystick becomes extremely dirty, use a diluted neutral detergent to clean the surface.

○ Do not use any type of solvents, which may damage the surface of the product.

In case of abnormal operation, please contact PTZOptics support at support@ptzoptics.com

Rev 1.1 9/21

Specyfikacje produktu

Marka:	PTZ Optics
Kategoria:	sterownik
Model:	PT-JOY-G4
Kolor produktu:	Biały
Moc:	580 W
Typ kontroli:	Przyciski
Wbudowany wyświetlacz:	Tak
Łatwy do czyszczenia:	Tak
Typ wyświetlacza:	LCD
Wysokość produktu:	320 mm
Szerokość produktu:	276 mm
Głębokość produktu:	280 mm
Waga produktu:	4200 g
Ilość na paczkę:	1 szt.
Technologia łączności:	Przewodowa
Opóźniony start czasomierza:	Tak
Opóźniony start:	10 h
Gniazdko wyjścia DC:	Tak
Przeznaczenie:	Wewnętrzna
Napięcie operacyjne:	12 V
Zakres temperatur (eksploatacja):	-10 - 50 °C
Zakres wilgotności względnej:	10 - 90 %
Przewodowa sieć LAN:	Tak
Maksymalny zasięg działania:	1200 m
Model:	Joystick
Port RS-232:	1
Zasilanie:	220-240 V, 50 Hz
Maksymalna waga chleba:	900 g
Funkcja przygotowywania dżemu:	Tak
Programy wyrabiania chleba & ciasta:	Baguette dough,Pizza dough
Funkcja utrzymywania temperatury:	Tak
Stopy antypoślizgowe:	Tak
Ilość automatycznych programów:	12
Moc znaminowa:	6 W
Porty RS-485:	1
Maksymalna ilość obsługiwanych kamer:	253