Instrukcja obsługi Provision ISR NVR5-16400(1U)
Provision ISR
magnetowid
NVR5-16400(1U)
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Provision ISR NVR5-16400(1U) (100 stron) w kategorii magnetowid. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/100
1
1
Notes
Please read this user manual carefully to ensure that you use the device correctly and
safely.
There may be incorrect info or printing errors in this manual. Updates and corrections will
be made into the future versions of this manual. The contents of this manual are subject to
change without notice.
The device should be operated only from the type of power source indicated on the
marking label. The power voltage must be verified before use.
Do not install this device near any heat sources such as radiators, heat registers, stoves or
other devices that produce heat.
Do not install this device near water. Clean only with a dry cloth.
Do not block any ventilation openings and ensure proper ventilation around the device.
Perform a safe power off before disconnecting from power.
This device is for indoor use only. Do not expose it to rainy or moist environment. In case
any solid or liquid get inside the device’s case, turn off the device immediately and get it
checked by a qualified technician.
Do not try to repair the device by yourself without technical aid or approval.
When this device is in use, the relevant contents of Microsoft, Apple and Google may be
shown. The ownerships of trademarks, logos and other intellectual properties related to
Microsoft, Apple and Google shall belong to the above-mentioned companies.
This manual is suitable for all models running Ossia OS. All examples and pictures used in
the manual are from one of the models for reference purpose.
Basic Operation Guide User Manual
2
Contents
Contents ..................................................................................................................................... 2
1 Introduction ................................................................................................................... 5
1.1 Summary ....................................................................................................................... 5
1.2 Features ......................................................................................................................... 5
1.3 Front Panel Descriptions ............................................................................................... 8
1.4 Rear Panel Descriptions ................................................................................................ 9
1.5 Connections ................................................................................................................. 11
2 Basic Operations Guide .............................................................................................. 13
2.1 Startup & Shutdown .................................................................................................... 13
2.1.1 Startup .............................................................................................................. 13
2.1.2 Shutdown ..........................................................................................................13
2.2 Remote Controller ....................................................................................................... 14
2.3 Mouse Control ............................................................................................................. 15
2.4 Text-input Instruction .................................................................................................. 16
2.5 Other Button Operations ............................................................................................. 16
3 Wizard & Main Interface ........................................................................................... 17
3.1 Startup Wizard ............................................................................................................. 17
3.2 Main Interface ............................................................................................................. 22
3.2.1 Main Interface Introduction ...........................................................................22
3.2.2 Setup Panel ....................................................................................................... 24
3.2.3 Main Functions ................................................................................................. 25
4 Camera Management .................................................................................................. 27
4.1 Add/Edit Camera ......................................................................................................... 27
4.1.1 Add Camera ...................................................................................................... 27
4.1.2 Edit Camera ...................................................................................................... 28
4.2 Add/Edit Camera Group .............................................................................................. 29
4.2.1 Add Camera Group ........................................................................................... 29
4.2.2 Edit Camera Group ........................................................................................... 30
5 Live-view Introduction: .............................................................................................. 30
5.1 Live-View Interface: ...................................................................................................30
5.2 Live-View Modes: ....................................................................................................... 32
5.2.1 Display Presets ................................................................................................. 32
5.2.2 Sequence: ......................................................................................................... 33
5.2.3 In Channel Sequence ........................................................................................ 34
5.3 Image Configuration ...................................................................................................35
5.3.1 OSD Settings .................................................................................................... 35
5.3.2 Image Settings .................................................................................................. 35
5.3.3 Mask Settings ................................................................................................... 36
5.3.4 Image Adjustment ............................................................................................36
6 PTZ ............................................................................................................................... 39
6.1 PTZ Control Interface: ................................................................................................ 39
Basic Operation Guide User Manual
14
2.2 Remote Controller
① Open the battery cover of the remote controller and insert two AAA size batteries.
② When placing the batteries. Please ensure the correct polarity (+ and - ).
③ Replace the battery cover.
Key points to check in case the remote doesn’t work.
1. Check batteries polarity.
2. Check if the batteries are not dead
3. Check IR controller sensor for any interference.
If it still doesn t work, please change a new remote controller or contact your local supplier. ’
There are two kinds of remote controller. The interface of remote controller is shown as
below.
Button
Function
Power Button
Switch off to stop the device —
Record Button
To start recording
-/ - -- /0 9
Input number or choose camera
Fn1 Button
Unavailable temporarily
Multi Button
To choose multi screen display mode
Next Button
To switch the live image
SEQ
To go to sequence view mode
Audio
To enable audio output in live mode
Switch
No function temporarily
Direction button
To move cursor in setup or pan/title PTZ
Enter Button
To confirm the choice or setup
Menu Button
To go to menu
Exit Button
To exit the current interface
Focus/IRIS/Zoom/PTZ
To control PTZ camera
Preset Button
To enter into preset setting in PTZ mode
Cruise Button
To go to cruise setting in PTZ mode
Track Button
No track function temporarily
Wiper Button
No function temporarily
Light Button
No function temporarily
Clear Button
No function temporarily
Fn2 Button
No function temporarily
Info Button
Get information about the device
To control playback. Play(Pause)/Stop/Previous Frame/Next
Frame/Speed Down/Speed Up
Snap Button
To take snapshots manually
Search Button
To go to search mode
Cut Button
No function temporarily
Backup Button
To go to backup mode
Zoom Button
To zoom in the images
PIP Button
No function temporarily
Note:
You shall press P.T.Z button to enter PTZ setting mode, choose a channel and press P.T.Z button again to
hide the P.T.Z control panel. Then you can press preset, cruise, track, wiper or light button to enable the
relevant function.
Wizard & Main Interface User Manual
22
Manual: After switching to manual, set the schedule for Sensor Record“ ”, “Motion Record ”
and Schedule Record of each camera. (You can choose all together by clicking on Click “ ” .
“ ”OK to save the settings.
3.2 Main Interface
3.2.1 Main Interface Introduction
Wizard & Main Interface User Manual
26
Alarm Management for details.
Network
This category contains and TCP/IPv4, , DDNS Port, E-mail Network Status. Please see 11.1
Network Configuration for details.
Account and Authority
This category covers (see 10.1 Account Management for details) and Account Management
Permission Management (see 10.3 Permission Management for details).
System
The category shows (see 11.2 Basic Configuration for details), Basic Configuration Device
Information (see 11.7 View System Information for details) (see 11.6 View , Log Information
Log for details) and (see 11.5 Backup and Restore for Configuration File Import & Export
details) .
Live Preview Introduction User Manual
27
4 Camera Management
4.1 Add/Edit Camera
4.1.1 Add Camera
The NVR’s network parameters should be configured before adding IP cameras (s 11 ee .1.1
TCP/IPv4 Configuration for details).
Referring the pictures below, Click in the setup panel or in the top to on Add Camera
right corner of the preview window to pop up the Add Camera window as shown below. You “ ”
can quick adduse the “ ” interface to add an IP Camera or add it manually.
Live Preview Introduction User Manual
32
5.2 Live-View Mode s:
5.2.1 Display Presets
S different screen split modes and camera layouts as required and save the display to create a et
preset. Refer to the picture below. Double click on the display preset from the list to activate it.
Add Display Preset:
Method One:
① Click Display Preset in the above interface “ ”
② Set the screen split mode.
③ Add the cameras as desired.
④ Click the Save button under the display presets list “ ”
⑤ Enter the display mode name in the popup window and click button to save “OK”it.
Method Two:
① Click Start Settings System Basic Layout Settings
② Click to add a new layout.
③ Choose the screen split mode from the bottom.
④ Double click the camera or camera group in the list to add them to the selected window.
⑤ Click to save the defined output as a preset (refer to 5.2.4 Scheme View In Sequence
for detail configurations). The saved preset will be displayed in the display preset list in the
live-view interface.
Edit Display Mode
Click Display Presets tab in the live-view interface. Select the display preset from the list. “ ”
Click Rename to edit the display mode name; click Delete to delete the display mode. “ ” “ ”
Live Preview Introduction User Manual
33
5.2.2 Sequence:
The sequence view will automatically switch the viewed cameras in specified times.
I a customized scheme has not been created, it will keep the split layout and go through all of f
the cameras. If the scheme has been created the sequence will run the created scheme. –
Sequence Scheme Settings
Click Start Settings System Basic Layout Settings to go to the interface as shown below .
Area ① displays all the dwell schemes; area ② shows the camera scheme; area ③ displays
all the cameras and groups; area ④ is the tool bar ( : clear button; favorite button, :
click it to save the layout as preset ).
Specyfikacje produktu
| Marka: | Provision ISR |
| Kategoria: | magnetowid |
| Model: | NVR5-16400(1U) |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Provision ISR NVR5-16400(1U), zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje magnetowid Provision ISR
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
Instrukcje magnetowid
- magnetowid Sony
- magnetowid Samsung
- magnetowid Tenda
- magnetowid LG
- magnetowid Motorola
- magnetowid TP-Link
- magnetowid Philips
- magnetowid Bosch
- magnetowid Hikvision
- magnetowid EZVIZ
- magnetowid Panasonic
- magnetowid Canon
- magnetowid Reolink
- magnetowid TRENDnet
- magnetowid Toshiba
- magnetowid D-Link
- magnetowid Imou
- magnetowid Dual
- magnetowid Grundig
- magnetowid Tripp Lite
- magnetowid Moxa
- magnetowid Synology
- magnetowid JVC
- magnetowid Linksys
- magnetowid Funai
- magnetowid Digitus
- magnetowid Dahua Technology
- magnetowid DataVideo
- magnetowid Vivotek
- magnetowid Speco Technologies
- magnetowid Navitel
- magnetowid AirLive
- magnetowid Planet
- magnetowid Aiwa
- magnetowid LevelOne
- magnetowid Axis
- magnetowid Lorex
- magnetowid Milesight
- magnetowid Abus
- magnetowid Elro
- magnetowid Ubiquiti Networks
- magnetowid QNAP
- magnetowid Hitachi
- magnetowid Ernitec
- magnetowid Technaxx
- magnetowid Hanwha
- magnetowid Grandstream
- magnetowid Blackmagic Design
- magnetowid Foscam
- magnetowid Monacor
- magnetowid Daewoo
- magnetowid Kunft
- magnetowid UniView
- magnetowid A.C.Ryan
- magnetowid Aristona
- magnetowid Acti
- magnetowid Sylvania
- magnetowid Magnum
- magnetowid GeoVision
- magnetowid Evga
- magnetowid Seagate
- magnetowid Digital Watchdog
- magnetowid DirecTV
- magnetowid Skytronic
- magnetowid Magnavox
- magnetowid Inkovideo
- magnetowid Pentatech
- magnetowid Bang Olufsen
- magnetowid Mach Power
- magnetowid Avigilon
- magnetowid IDIS
Najnowsze instrukcje dla magnetowid
9 Kwietnia 2025
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
7 Kwietnia 2025
6 Kwietnia 2025
6 Kwietnia 2025
6 Kwietnia 2025