Instrukcja obsługi ProMediaGear TR424

ProMediaGear statyw TR424

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ProMediaGear TR424 (4 stron) w kategorii statyw. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
PRO-STIX
(42mm Series)
Carbon Fiber Tripod
Instruction Manual
#TR423 / #TR424 / #TR424L
Our ProMediaGear Pro-Stix, “42mm Series” Tripods, are made with 10x Layer carbon ber,
hard anodized 6061-T6 Aluminum, and Stainless Steel components. Made in the USA.
MOUNTING STUD
3/8-16 Mounting Stud securely attaches to tripod head.
SPIRIT LEVEL
Bubble level incorporated into the Apex to level your tripod with ease on uneven terrain.
ANGLE STOP
3-Position stops with built-in nger push area that allows for quick leg adjustments for any
shooting situation.
APEX LOCK
Safety Button. Unit must be depressed to remove mounting plate. Loosen spring loaded screw
counter-clockwise before depressing button.
LEG
42mm, 10x layer carbon ber weave for the ultimate in strength, weight and stability.
Ultra lightweight, large diameter tubes.
TWIST LOCKS
Machined aluminum locks with anti-slip grooves.
RUBBER MOLDED FEET W/ STAINLESS STEEL SPIKE (included)
Soft non-marking rubber foot. Unscrew to reveal the hidden Stainless Steel Spike.
1.
2.
3.
4.
5.
6.
7.
1.
3.
2.
4.
5.
6.
7.a
7.b
Optional Accessories
SPECIFICATIONS
• 42mm Diameter Legs • 10x Layer Carbon Fiber • CNC Machined Aluminum Apex
• 3 Leg Locking Angle Positions • 3 Stainless Steel Spikes (included)
• Max Load: 125 lbs.
HEAD MOUNTING
To install a Ball Head, Video Head or Gimbal of your choice rst locate the 3/8-16 screw on the top of
the removable tripod plate. Next, match up your accessory and insert it over the screw. Tighten your
accessory in a clockwise fashion until it becomes snug. In some cases it may be necessary to tighten
your pan knob then tighten a little more. You may also remove the “42 Series” Top Plate if you feel it is
easier for you, however not necessary.
OPERATION
Before using your tripod, adjust each leg section to the desired length and angle setting.
Make sure the tripod is on a secure base and level surface and that all leg locks are securely
tightened before installing your camera onto the tripod.
NOTE: For added stability hang a bag or object from the middle hanger under the apex.
LEG ADJUSTMENTS
To accommodate uneven terrain, awkward shooting situations, or for low angle shooting the tripod
offers 3 adjustable leg angle adjustments. Each leg may be adjusted by pushing out the angle leg
lock on the apex. The lock is contoured to t your nger and allows for convenient adjustments. Once
the lock is released move the leg into the desired position and press back into position to secure.
Repeat on the other legs if desired.
LEG SECTION ADJUSTMENT
Aluminum leg collars with built-in anti-rotation sleeves can be found at the end of each leg segment.
To adjust the tripod leg height securely hold the tripod and in a counter-clockwise motion loosen the
collar. Extend the leg to the desired shooting position and tighten clockwise until tightened.
MOLDED RUBBER + SPIKED FEET
The Pro-Stix “42 Series” Tripods are equipped with a non-marring rubber foot that works great in any
leg lock position. When the terrain calls for it, inside each foot features a large stainless steel spike
tucked away. Remove the foot counter clock-wise to reveal the spike then remove the spike. A hole is
drilled into the spike to assist in loosening and tightening if necessary by sliding an Allen key or small
item into the hole. Remove the spike and re-install on the other side of the foot.
TRB75 - 75mm Tripod Bowl Insert.
TRBU75 - 75mm Tripod Leveling Base.
visit: www.ProMediaGear.com for more details
TR423
3 (42mm top leg diameter)
58” in. / 147 cm
6.80 in. / 17.25 cm
26” in. / 66 cm
5.80 lbs / 2600g
TR424
3 (42mm top leg diameter)
58” in. / 147 cm
6.00” in. / 16.50 cm
21.25” in. / 60 cm
5.90 lbs / 2700g
TR424L
4 (42mm top leg diameter)
77” in. / 196 cm
6.70” in. / 15 cm
26.25” in. / 67 cm
6.40 lbs / 2900g
Sections:
Max Height:
Min Height:
Folded Length:
Weight:

Specyfikacje produktu

Marka: ProMediaGear
Kategoria: statyw
Model: TR424

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ProMediaGear TR424, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje statyw ProMediaGear

ProMediaGear

ProMediaGear TR424 Instrukcja

22 Września 2024
ProMediaGear

ProMediaGear TR344 Instrukcja

21 Września 2024
ProMediaGear

ProMediaGear TR343 Instrukcja

21 Września 2024

Instrukcje statyw

Najnowsze instrukcje dla statyw

Manfrotto

Manfrotto Digital Director Instrukcja

9 Października 2024
Manfrotto

Manfrotto MVR901ECEX Instrukcja

9 Października 2024
Manfrotto

Manfrotto 562B-1 Instrukcja

8 Października 2024
E-Image

E-Image EG01A2 Instrukcja

8 Października 2024
E-Image

E-Image GH10 Instrukcja

8 Października 2024
E-Image

E-Image GC752 Instrukcja

8 Października 2024
E-Image

E-Image EG03A2 Instrukcja

8 Października 2024
E-Image

E-Image GA752 Instrukcja

8 Października 2024
E-Image

E-Image GH03 Instrukcja

8 Października 2024
E-Image

E-Image GH06 Instrukcja

8 Października 2024