Instrukcja obsługi Projecta HDBT100

Projecta Niesklasyfikowane HDBT100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Projecta HDBT100 (30 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/30

Tray Fitting Instructions to suit Auxiliary battery for

TOYOTA 70 SERIES – V8 TURBO DIESEL – with ABS

Model: All 70 Series from Aug 2012 onwards

with factory fitted ABS

HEAVY DUTY DUAL BATTERY TRAY

P/No. HDBT100

IMPORTANT SAFETY INFORMATION

Please read this instruction thoroughly before fitting the tray.

This product is recommend to be fitted by a workshop or qualified mechanical person.

WARNINGS

• Before installation, make sure that the vehicle is stationary and the wheels chocked.

• Be careful when laying wires, not to cause any electrical shorts or wire breakage.

• After installation ensure the bonnet can close without hitting the newly installed battery

and battery tray.

SPECIFICATIONS

Max Battery Size (mm) L300 x W175 x H220

Max Battery Weight 24Kg

Recommended batteries Optima D27M & Optima D31A

Approximate fitting time 1.5 hours

Special tools None required

Recommended Dual DC to DC Charger (P/n: IDC25)

Battery System

Tray Location Engine Bay, Passenger side near firewall

KIT INCLUDES

Hardware

2 x M8 Bolts

2 x M8 Bolts long

1 x M8 Nut

4 x M6 Bolt

1 x M6 Weld Bolt

4 x M6 Nuts

3 x M6 Body Washer

Battery Hold

Down Clamp

Long Top

Support

Short Top

Support

ABS

Computer

Mount

Tray

J Bolts

FITTING INSTRUCTIONS

1. Make sure that the vehicle is stationary, the engine is switched off and cool.

Disconnect the negative battery terminal from the main battery.

2. Disconnect and remove the two computers located on wheel arch on passenger

side rear of engine bay taking note of which plug goes to which computer.

3. Remove mounts for the computers (these are no longer required).

4. Secure the wiring joiners against the firewall under multi-pin connector

on firewall.

5. Unbolt and relocate trailer plug fuse/relay box to inner guard using 1 x original

bolt into existing threaded hole.

Specyfikacje produktu

Marka:	Projecta
Kategoria:	Niesklasyfikowane
Model:	HDBT100
Wysokość produktu:	65 mm
Szerokość produktu:	155 mm
Głębokość produktu:	230 mm
Waga produktu:	365 g
Technologia łączności:	Przewodowa
Certyfikaty:	CE
Wewnętrzny:	Tak
Przewody:	USB
System operacyjny:	Windows XP, Windows Me, Windows 2000, Windows 98
Złącze(a):	RJ-45
Minimalna ilość pamięci RAM:	64 MB